Panasonic VDRM70EB Operating instructions

Type
Operating instructions

This manual is also suitable for

Panasonic VDRM70EB: Capture life's moments in stunning detail with this feature-packed DVD camcorder. Record precious memories on DVD-RAM, DVD-R, or DVD-RW discs. Enjoy the versatility of shooting in various recording modes, including high-quality XP and SP modes. The 2.7-inch LCD screen provides easy viewing and framing of your shots, while the 30x optical zoom lets you get closer to the action. Unleash your creativity with manual focus and white balance adjustments, along with a range of scene modes for optimal results in different lighting conditions.

Panasonic VDRM70EB: Capture life's moments in stunning detail with this feature-packed DVD camcorder. Record precious memories on DVD-RAM, DVD-R, or DVD-RW discs. Enjoy the versatility of shooting in various recording modes, including high-quality XP and SP modes. The 2.7-inch LCD screen provides easy viewing and framing of your shots, while the 30x optical zoom lets you get closer to the action. Unleash your creativity with manual focus and white balance adjustments, along with a range of scene modes for optimal results in different lighting conditions.

1. Camcorder not installing, Windows giving an error message when the camcorder
was plugged in.
Resolution
First please ensure that the ‘DVD RAM Driver’ has been installed from the included CD
ROM. This can be checked in Add/Remove Programs, in ‘Control Panel’
Hints/Tips
DOCUMENT TITLE
VDR-M30/50/70 DVD Camcorders, Computer Installation
trouble shooting Guide
REV
01.00
APLICABLE MODELS
VDR-M30, VDR-M50, VDR-M70
DOCUMENT TYPE
After this has been confirmed you will need to check ‘Device Manager’ to get into device
manager you will need to RIGHT CLICK on ‘My Computer’ and select ‘Properties’. Select
the ‘Hardware’ TAB and then click device manager. You will find the DVD Camera under
‘Universal Serial Bus controllers (See Below).
You will then need to remove the device from ‘Device manager’. To do this RIGHT CLICK
on the Panasonic device and select ‘Uninstall’
After this has been done please ensure that the Panasonic CD ROM is inserted in the CD
ROM drive on the computer. You will then need the computer to re-install the DVD
camcorder. To do this RIGHT CLICK on ‘Universal Serial Bus controllers’ and select ‘Scan
for Hardware changes’. The computer should then display ‘Found new Hardware’ and
display this Option.
On this option you will need to select ‘No, not at this time, and CLICK Next. This option
will then appear….
Select the ‘Install the software automatically’ option and then click next this should then
install the USB Interface. If the windows LOGO testing message appears select ‘Continue
anyway’ (See Below)
The computer should then display a confirmation Screen (See below)
CLICK ‘Finished’
The computer should then display found new hardware again for the USB-SCSI controller…
Again Select ‘Install the software automatically’. This should then install the USB SCSI
controller. If The Windows LOGO testing message appears click ‘Continue anyway’ (See
below)
Again you should see a confirmation screen (See below)
CLICK ‘Finish’
To confirm that the Drive has been created open ‘My Computer’. You should see 2 NEW
drives an ‘MX80’ and ‘Removable Disc’ (See Below). Please note that the Drive below that
says VDR_M30 is the Panasonic CD ROM that came with the camcorder NOT the
Camcorder itself.
1. After Installation of the camcorder is confirmed the following error message appears in
the DVD Movie Album software:-
Resolution
The problem is caused because the DVD Movie album software is trying to use the wrong
drive on the computer, you will need to change which drive is being used in the preferences:
First CLICK the ‘Preference’ Button on this message.
The preference window will then be displayed; you need to CLICK on ‘Device Setting’.
Then from the Drop down box in ‘Drive select’ Highlight the ‘MX80’ drive and CLICK
‘OK’(See Below)
Once you have CLICKED ‘OK’ the previous screen will appear and your video clips should
then start to appear on the right hand side (See Below)
You are now able to use the software to EDIT or EXPORT the video clips, for further Help
in doing this please see the built in instruction book. CLICK on the ‘?’ and select ‘DVD-
MovieAlbum Manual. (See Below)
2. After Installation of the camcorder is confirmed the following error message appears in
DVD movie album:-
Resolution
Please make sure that no other application is trying to access the ‘MX80’ drive. Also if
ROXIO easy CD Creator is installed on the computer, it will cause this problem. You will
need to uninstall ROXIO software then RESTART the PC in order to use the DVD movie
album software.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Panasonic VDRM70EB Operating instructions

Type
Operating instructions
This manual is also suitable for

Panasonic VDRM70EB: Capture life's moments in stunning detail with this feature-packed DVD camcorder. Record precious memories on DVD-RAM, DVD-R, or DVD-RW discs. Enjoy the versatility of shooting in various recording modes, including high-quality XP and SP modes. The 2.7-inch LCD screen provides easy viewing and framing of your shots, while the 30x optical zoom lets you get closer to the action. Unleash your creativity with manual focus and white balance adjustments, along with a range of scene modes for optimal results in different lighting conditions.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI