Dometic RM 7290 L User manual

Brand: Dometic

Model: RM 7290 L

Category: Fridge-freezers

Type: User manual

REFRIGERADOR POR ABSORBCIÓN

para CARVANAS o MOTORCARAVANAS

INSTRUCCIONES DE USO

INSTRUCCIONES DE INSTALACI

RM 6270 (L)

RM 6271 (L)

RM 6290 (L)

RM 6291 (L)

RM 6360 (L)

RM 6361 (L)

RM 6400 (L)

RM 6401 (L)

RM 7270 (L)

RM 7290 (L)

RM 7360 (L)

RM 7400 (L)

Typ C40 / 110

821 2690-63

T.B. 06/2003

Español

English

MANUAL

ABSORPTION REFRIGERATOR

for CARAVAN and MOTORHOME

Guarde cuidadosamente estas instrucciones de uso.

En caso de transmisión del aparato adjunte estas instrucciones de uso.

Dansk

Deutsch

ÅëëçíéêÜ

English

Español

Français

Italiano

Nederlands

Norsk

Português

Suomi

Svensk

via INTERNET www.dometic.com

Kundeservice

Kundendienst

ÅîõðçñÝôçóç Ðåëáôþí

Customer Service

Servicio de Atención al Cliente

Service après-vente

Servizio Clienti

Klantenservice

Kundeservice

Serviço de Atendimento a Clientes

Asiakaspalvelu

Kundservice

1.0 INTRODUCTION 4

2.0 FOR YOUR SAFETY 4

2.1 Warning and safety notices 4

2.2 Coolant 4

3.0 WARRANTY AND CUSTOMER 5

SERVICE

3.1 Damage in transit 5

4.0 DESCRIPTION OF MODEL 5

5.0 REFRIGERATOR GUIDE 5

5.1 Cleaning 5

5.2 Using the refrigerator 6

5.3 Defrosting 9

5.4 Storing food 9

5.5 Making ice cubes 9

5.6 Door locking 10

5.7 Switching off the refrigerator 10

5.8 Positioning the storage racks 10

5.9 Winter operation 11

5.10 Interior light 11

5.11 Changing the decor panel 12

5.12 Changing the doorhang 13

5.13 Troubleshooting 14

5.14 Maintenance 15

5.15 Product liability 15

5.16 Environmental hints 15

5.17 Disposal 15

5.18 Energy-saving tips 15

5.19 Technical data 16

5.20 Declaration of conformity 16

6.0 INSTALLATION GUIDE 17

6.1 Installation 17

6.2 Draught-free installation 18

6.3 Ventilation and air extraction 19

6.4 Installation of the ventilation 20

system

6.5 Installation recess 21

6.6 Securing the refrigerator 21

6.7 Fume extraction 22

6.8 Gas installation 23

6.9 Electrical installation 25

TABLE OF CONTENTS

INTRODUCTION

You have made an excellent choice in selecting the Dometic Absorption Refrigerator.

We are sure that you will be fully satisfied with your new appliance in all respects.

The appliance, which works silently, meets high quality standards and guarantees

the efficient utilisation of resources and energy throughout its entire life cycle, during

manufacture, in use and when being disposed of.

Before you start to use the appliance, please read the installation and operating

instructions carefully.

The refrigerator is designed for installation in leisure vehicles such as caravans or

motorcaravans. The appliance has been certified for this application in accordance with

EU Gas Directive 90/396/EEC.

FOR YOUR SAFETY

Warning and safety notices

 Never use a naked flame to check the appliance for leaks.

 Protect children!

When disposing of the refrigerator, remove all refrigerator doors and leave the

storage rack in the refrigerator. This will prevent accidental locking in or suffocation.

 If you smell gas:

- close the locking tap of the gas supply and the valve on the cylinder.

- open the windows and leave the room.

- do not switch on anything electrical.

- extinguish naked flames.

 Never open the cooling unit; it is under high pressure.

 Work on the gas, flue system and electrical components must only be

carried out by qualified service personnel.

 It is imperative that the operating pressure should correspond to the data given on

the model plate of the appliance.

 Compare the operating pressure data given on the model plate with the data on the

pressure monitor of the liquid gas cylinder.

 Liquid gas cylinders may only be changed by qualified personnel.

 Gas operation of the appliance is not permitted while travelling on ferries.

 Covers ensure electrical safety and must only be removed using a tool.

 The appliance must not be exposed to rain.

 The refrigerator is not suitable for the proper storage of medications.

Coolant

Ammonia is used as a coolant.

This is a natural compound also used in household cleaning agents (1 litre of

Salmiak cleaner contains up to 200g of ammonia - about twice as much as is used in

the refrigerator). Sodium chromate is used for corrosion protection (1.8% of the

solvent).

In the event of leakage (easily identifiable from the unpleasant odour):

 switch off the appliance.

 air the room thoroughly.

 inform the authorised Customer Service department.

11..00

22..00

2.1

2.2

Danger Attention

WARRANTY AND CUSTOMER SERVICE

Warranty arrangements are in accordance with EC Directive 44/1999/CE and the

normal conditions applicable for the country concerned. For warranty or other

servicing, please contact our Dometic Service department. Any damage due to impro-

per use is not covered by the warranty. The warranty does not cover any modifica-

tions to the appliance or the use of non-original Dometic parts;

the warranty does not apply if the installation and operating instructions are not

adhered to and no liability shall be entertained. Parts can be ordered throughout

Europe from our Dometic Service department. Your Service Centre contact numbers

numbers are found in the European Service Network booklet

When contacting Dometic Service, please state the model and product numbers,

together with the MLC Code, if applicable. You will find this information on the data

plate inside the refrigerator.

Damage in transit

After removing the packaging, check whether the refrigerator has been damaged

during transportation.

Any damage sustained in transit must be reported to the transportation company

concerned no later than seven days after delivery of the goods.

DESCRIPTION OF MODEL

REFRIGERATOR GUIDE

Cleaning

Before using the refrigerator, it is advisable to clean the appliance both inside and

out.

 Use a soft cloth and lukewarm water with a mild detergent.

 Then rinse the appliance with clean water and dry thoroughly.

 Remove dust from the refrigerator unit at yearly intervals using a brush or soft cloth.

WWAARRNNIINNGG

To avoid deterioration of materials:

 Do not use soap or hard, abrasive or soda-based cleaning agents.

 Do not allow the door seal to come into contact with oil or grease.

33..00

44..00

55..00

5.1

RM 6270 L

e.g.

Refrigerator Mobil /

Mobile Absorber Refrigerator

Last digit 1 = automatic ignition

Last digit 0 = manual ignition

L with interior light

3.1

model

Using the refrigerator

 The cooling unit is silent in operation.

 When the appliance is first put into operation, there may be a mild odour which will

disappear after a few hours. Ensure the living area is well ventilated.

 The freezer compartment should be cold about one hour after switching on the

refrigerator.

 The refrigerator will take several hours to reach its operating temperature.

Controls

Note:

The refrigerator is equipped to operate off mains power, DC or liquid gas.

The desired power option is selected by means of energy selector switch (A).

Energy selector switch (A) has four settings: AC mains power, DC (12V),

gas (liquid gas), O (off).

5.2

5.2.1

A. Manual Ignition Piezo (e.g. RM 6270L or RM7400L)

B. Automatic Ignition ( e.g. RM 6271L)

B C

A = energy selector switch

B = gas/electric thermostat

C = manual ignition button (Piezo ignition)

A = energy selector switch

B = gas/electric thermostat

D = automatic ignition indicator

Off

Gas

RM 6xx0/1 RM 7xx0

RM 6xx0

RM 7xx0

Electrical operation

1. 12V DC

The refrigerator should only be used while the motor is running.

1. Set energy selector switch (A) to.

The refrigerator operates without thermostatic

control (continuous operation).

2. Mains power

This option should only be selected where the supply voltage of the connection

for power supply corresponds to the value specified on the data plate.

Any difference in values may result in damage the appliance.

Gas operation



The refrigerator should only be operated using liquid gas

(propane, butane). Do not use town gas or natural gas.



If the refrigerator is operated during travel using gas, the precautions

stipulated by the legislation in the respective country must be taken (in

conformity with the European standard EN 732).

Operating the refrigerator with gas is not permitted during travel in

France and Australia.



As a basic rule, operation using gas is prohibited in petrol stations.

1. Open the valve of the gas cylinder

2. Open the shut-off valve to the gas supply.

Proceed to the description that applies to YOUR model.

1. Manual ignition

5.2.2

5.2.3

1. Set energy

selector switch (A)

to gas.

2. Press and hold

rotary switch.

4. Check the inspection glass to

see whether there is a flame

(the inspection glass is insi-

de the refrigerator at the

bottom left).

1. Set energy

selector switch

(A) to.

2. Use rotary

switch (B) to

regulate the

temperature in

the main refrige-

rator compart-

ment.

3. Activate Piezo

ignition (C)

several times at

intervals 1-2

seconds.

5. Keep rotary switch (B) depressed for another 10-15 seconds, then release.

6. Check the inspection glass to see whether a flame is burning.

7. Repeat the entire process if the flame has gone out.

8. Use rotary switch (B) to regulate the temperature in the main refrigerator compartment.

2. Automatic ignition

4. Keep rotary switch "B" depressed for another 10-15 seconds, then release.

5. If the flame goes out, the ignition system will repeat the ignition process automatically.

6. Adjust the temperature in the main refrigerator compartment using rotary switch "B".

All refrigerators, whether manual or automatic ignition, are equipped with

automatic flame protection, which automatically cuts off the supply of gas

approximately 30 seconds after the flame goes out.

When using for the first time, and after changing the gas cylinder, the gas

pipes may contain air. By means of brief operation of the refrigerator and

any other gas appliances (e.g. cookers), air is removed from the gas pipes.

The gas will then ignite without delay.

Temperature setting cooling compartment

1. Set energy

selector switch (A)

to Gas.

2. Press and hold

rotary switch (B).

3. The ignition process is activated automatically,

accompanied by a ticking sound; the indicator

lamp (D) will flash. Upon successful ignition, the

sound and the flashing will stop.

TTIIPP

middle position

The cooling units performance is influenced by ambient temperatures.

At ambient temperatures of +15°C up to 25°C, set the knob B to the

middle position. The cooling unit works with optimal performance.

As already shown, with rotary knob (B) the temperature in the cooling compart-

ment can be regulated as necessary.

5.2.4

Defrosting

As time goes by, frost builds up on the fins.

When the layer of frost is about 3mm thick, the refrigerator should be defrosted.

1. Switch off the refrigerator, as described in Section 5.3 - "Switching off".

2. Remove the ice cube tray and food.

3. Leave the refrigerator door open.

4. After defrosting (freezer compartment and fins free of frost), wipe the cabinet dry

with a cloth.

5. Use a cloth to mop up the water from the freezer compartment.

6. Switch the refrigerator back on again.

The layer of ice must never be removed forcibly, nor may defrosting be

accelerated using a heat source.

Note:

Water thawing in the main compartment of the refrigerator runs into an appropriate

container at the back of the refrigerator. From there, the water evaporates.

Storing food

 Always store food in sealed containers, aluminium foil or similar.

 Never put hot food into the refrigerator; always let it cool first.

 Products that could emit volatile, flammable gases must not be stored in the

refrigerator.

 Store quickly perishable foods directly next to the cooling fins.

The freezer compartment is suitable for making ice cubes and for short-term

storage of frozen food.It is not suitable as a means of freezing foods.

Making ice cubes

Ice cubes are best frozen overnight. At night, the refrigerator has less work to do and

the unit has more reserves.

Only use drinking water!

5.3

5.4

5.5

1. Fill the ice

cube tray with

drinking water.

2. Place the ice cube tray

in the freezer

compartment.

Door locking

1. Loosen the front

and back securing

brackets.

2. Move the storage rack to the left and

remove it.

Dismantling:

To fit the storage rack, the reverse order applies.

1. Set energy selector switch (A) to

position "0" (OFF). The appliance is

now fully switched off.

2. Secure the door open by

means of the door stop.

The door will be slightly

ajar; this is to prevent

mould from forming inside

the appliance.

Switching off gas operation

If the refrigerator is to be taken out of service for an

extended period of time, the on-board shut-off valve

and the cylinder valve must be closed.

park position

close open

park position

open

5.6

5.7

5.8

Fig. above RM 6xxx

Fig. below RM 7xx1

Switching off

Positioning the storage rack

Winter operation

1. Check that the ventilation grilles and the extractor have not been blocked by

snow, leaves or similar.

Interior light (when fitted)

Changing the light bulbs

5.9

5.10

1. Remove cover.

2. Detach defective light

bulb.

3. Fit new light bulb.

4. Clip the cover back in

place.

90°

Note:

for 12V DC :

1 light bulb 8V, 2W

for 24V DC :

2 light bulbs 28V, 1,5W

Please contact Dometic Service centres for

replacement light bulbs.

2. When the ambient temperature falls below +8°C, the optional winter covers

should be fitted. This protects the unit from excessively cold air.

Lower ventilation grille ( L200 )

Upper ventilation grille with flue vent ( L100)

3. Affix the cover and

fasten it.

It is also recommended that the winter covers

should be used when the vehicle is taken out of

service for an extended period of time.

TTIIPP

Changing the decor panel

Dimensions of the panels in mm:

Model Height Width Thickness

RM 6270/71 713+/-1 453,5+1 3,2

RM 6360/61 713+/-1 453,5+1 3,2

RM 6290/91 718+/-1 491,5+1 3,2

RM 6400/01 718+/-1 491,5+1 3,2

RM 7270 713+/-1 453,5+1 3,2

RM 7360 713+/-1 453,5+1 3,2

RM 7290 718+/-1 491,5+1 3,2

RM 7400 718+/-1 491,5+1 3,2

5.11

1. Open the door

and loosen the

hinge screw.

2. Take off the door

by moving it upwards.

3. Unscrew the door strip

(3 screws).

4. Remove the decor

plate and insert a new

decor plate.

5. Screw the door

strip back in

position.

6. Put the door

back on.

7. Tighten the

hinge screw.

Changing the doorhang5.12

1. Open the door,

unscrew the hinge

screw and keep it to

hand.

2. Take off the door by

moving it upwards.

9. Attach the door.

10. Screw the hinge screw back in.

It is not always possible to change the door when the refrigerator is installed.

(example RM 6xx1)

Troubleshooting5.13

Failure : The refrigerator does not work in gas operation mode.

Possible cause Action you can take

a.) Gas bottle empty.

b.) Is the supply cut-out device open?

c.) Air in the gas pipe?

Before calling the authorised Service Department, please check whether:

1. The instructions in the section "Using the refrigerator" have been followed.

2. The refrigerator is not tilted excessiveley.

3. It is possible to operate the refrigerator with an available power source.

Failure : The refrigerator does not work on 12V.

Possible cause Action you can take

a.) On-board fuse defective.

b.) Engine not running.

a.) Fit new fuse.

b.) Start engine.

Failure : The refrigerator does not work on 230V.

Possible cause Action you can take

a.) On-board fuse defective.

b.) No connection to supply voltage.

a.) Fit new fuse.

b.) Establish power connection.

Failure : The refrigerator does not cool sufficiently.

Possible cause Action you can take

a.) Inadequate ventilation to the unit.

b.) The thermostat setting is too low.

c.) There is too much ice on the condenser.

d.) Too much warm food put inside.

e.) Appliance running for a short time.

a.) Check that the ventilation grilles are not

covered.

b.) Turn the thermostat to a higher setting.

c.) Check that the refrigerator door seals

when shut.

d.) Let food cool down first.

e.) Wait several hours, check again.

a.) Change gas bottle.

b.) Open the cut-out device.

c.) Switch device off and on again 3-4 times to

remove air from the gas pipe.

Maintenance

 Works on gas components and electical installation may only be carried out

by authorised personnel. We recommend to contact your Dometic Service

Centre.

 EN 1949 stipulates that the appliance´s gas equipment and its associated fume

system must be inspected after installation and a certificate issued.

Afterwards a qualified technician must inspect according to EN 1949 every two

years and a certificate issued.

It is the users responsibily to arrange for inspections after purchase.

 It is recommended that the gas burner be inspected and cleaned as necessary at

least once a year.

Product liability

The product liability of Dometic GmbH does not cover damage due to improper use or

any modifications or damage caused by the effect of environmental influence on the

device or in direct proximity to the device as a result of this effect, e.g. temperature

fluctuations and humidity.

Environmental hints

Refrigerators manufactured by Dometic GmbH are CFC-free.

Ammonia (a natural compound of hydrogen and nitrogen) is used in the cooling unit

as a coolant. The non-ozone-hazardous cyclopentan is used as a propellant in the

manufacture of the PU foam insulation.

Disposal

In order to ensure that the recyclable packaging materials are re-used, these should

be sent to the usual local collection system.

The appliance should be transferred to a suitable waste disposal company that will

ensure re-use of the recyclable components and proper disposal of the rest.

For eco-friendly draining of the coolant from all absorber refrigeration units, a suitable

disposal plant should be used

Energy-saving tips

 At an average ambient temperature of approx. 25°C, it is sufficient to operate the

refrigerator at the middle thermostat setting (for both gas and mains voltage).

 Where possible, always store goods that have previously been cooled.

 Do not position the refrigerator in direct sunlight.

 Constant circulation of air must be supplied to the refrigerator unit.

 Defrost regularly.

 Open the door only for a short time when removing goods from the refrigerator.

 Run the refrigerator for about 12 hours before filling it.

5.14

5.15

5.16

5.17

5.18

Technical data

We reserve the right to make technical changes.

*Average consumption measured at an average ambient temperature of 25°C in pursuance of

ISO Standard.

Declaration of conformity

5.19

5.20

RM 6270 821x486x541 77 lit. 9,5 lit. 125W / 120W approx. 2,5KWh / 270g 26kg X X

RM 6271 821x486x541 77 lit. 9,5 lit. 125W / 120W approx. 2,5KWh / 270g 26kg X X

RM 6290 821x525x541 86 lit. 10,5 lit. 125W / 120W approx. 2,5KWh / 270g 27kg X X

RM 6291 821x525x541 86 lit. 10,5 lit. 125W / 120W approx. 2,5KWh / 270g 27kg X X

RM 6360 821x486x541 88 lit. 9,5 lit. 135W / 130W approx. 2,6KWh / 270g 28kg X

RM 6361 821x486x541 88 lit. 9,5 lit. 135W / 130W approx. 2,6KWh / 270g 28kg X

RM 6400 821x525x541 97 lit. 10,5 lit. 135W / 130W approx. 2,6KWh / 270g 29kg X

RM 6401 821x525x541 97 lit. 10,5 lit. 135W / 130W approx. 2,6KWh / 270g 29kg X

RM 7270(L) 821x486x541 77 lit. 9,5 lit. 125 W / 120 W approx.2,5 KWh / 270 g 26 kg X X

RM 7290(L) 821x525x541 86 lit. 10,5 lit. 125 W / 120 W approx.2,5 KWh / 270 g 27 kg X X

RM 7360(L) 821x486x541 88 lit. 9,5 lit. 135 W / 130 W approx.2,6 KWh / 270 g 28 kg X

RM 7400(L) 821x525x541 97 lit. 10,5 lit. 135 W / 130 W approx.2,6 KWh / 270 g 29 kg X

Model Dimensions Groos capacity Usable Connection * Consumption Netweight Ignition Ignition Stepped-

H x W x D (mm) incl. freezer capacity of Mains / Battery electricity / gas Piezo Reigniter cabinet

depth incl. door compartment freezer in 24 hrs

compartment

INSTALLATION GUIDE

On installation of the appliance, the technical and administrative regulations of the

country in which the vehicle will first be used must be adhered to. Otherwise the

refrigerator must be installed as described in these instructions. In some OEM applica-

tions it may not be possible for these instructions to be followed exactly. In this case an

authorised Dometic representative may issue supplementary instruction

In Europe, for example, gas appliances, cable laying, installation of gas

cylinders, as well as approval and checking for leaks must comply with

EN 1949 for liquid gas units in vehicles.

Installation

The appliance and its fume extraction shall be installed in such a way as to be acces-

sible for servicing at all times and must be capable of easy removal and installation.

The appliance may only be installed by authorised personnel.

Installation and connection of the appliance must comply with the latest

technical regulations, as follows:



European Standard EN 1949



European Standard EN 732



The electrical installation must comply with national regulations

( EN 1648-1 , EN 1648-2 , EN 60335-2-24 for Europe).



The gas installation must comply with national regulations.



Local and building control department requirements



The appliance shall be installed in such a way that it is shielded from

excessive heat radiation.

Excessive heat impairs performance and raises the energy consumption of the

refrigerator.

Side Installation

If the appliance is installed on the same side of the vehicle as the entrance

door, it is desirable that the door does not cover the refrigerators vents.

If this cannot be avoided there must be a gap of at least 25mm between the door and

the vents.

Rear installation

If the refrigerator is mounted at the rear of the vehicle you must ensure the lower grille

is not covered by the bumper or rear lights.

This would be prevent the air from circulating properly and cause problems in

warm weather.

66..00

6.1

6.1.1

6.1.2

Fig.2

Air vent grille not

blocked: OK!

Any installation that is not carried out by qualified persons will

jeopardize the manufacturer's guarantee.

Draught-free installation

The refrigerator must be sealed in accordance with EN 1949.

Illustrated below are two typical approved methods of sealing.

Proposal 1:

Using the Installation Sealing Kit from Dometic

(SP

.No. 241 2559-00, available from Dometic)

Insert lipped seals (A) into the installation

recesses at the bottom and at each side.

Insert deflector plate (B), fitted with a lipped seal

(A) of heavy-duty, nonflammable material, into the

installation recess (see Fig. 1).

Insert deflector plate (B) in such a way that the

hot air escapes through the air vent grating into

the open air.

Affix the discharge plate to the caravan wall, not

to the refrigerator!

In addition, discharge plate (B) with its lipped seal

(A) must seal the refrigerator off from the living

area (see Fig. 1).

Ensure that the refrigerator is installed level in the

recess.

Proposal 2:

Another option is to provide the refrigerator with a cowl (A).

The cowl (A) should ideally be affixed to the caravan wall,

not to the refrigerator. Insert sealing strips at the bottom

and sides of the cover.

Finally, push the refrigerator into the cover from the front.

Both of these installation options facilitate the remo-

val and installation of the appliance for servicing.

Comment:

Other methods of sealing may be approved. However the chosen method must prevent

draughts entering the living space of the caravan or motorhome. Failure to seal correct

ly will allow warm air to collect around the refrigerator and its performance will be

affected.

If the cavity between the caravan wall and the refrigerator is sealed so that fumes

cannot penetrate the living area it is possible to vent the flue gas directly through the

upper grille without using the aluminium flue pipe. For this installation method, it is

recommended that the same air vent grille should be used at the top and at the

bottom (L200), and that the T-piece of the flue pipe is turned 45 degrees.

6.2

Fig.1

In this case, for gas operation, do not use the upper winter cover!

If even with draught-free installation a fume chimney is desirable, you must incorporte

the L100 ventilation and extraction system

into the upper air vent opening.

Installation of fume chimney: please refer to point 6.7.

Ventilation and extraction

A correct installation is important for correct operation of the appliance to ensure, there

is no a build-up of heat at the back of the appliance; this heat must be allowed to escape

into the open air.

In the event of high ambient temperatures, full performance of the cooling unit

can only be achieved by means of adequate ventilation and extraction.

Ventilation is provided for the unit by means of two apertures in the caravan wall.

Fresh air enters at the bottom, extracts the heat and exits through the upper vent

grille.

The upper ventilation grille should be positioned as high as possible above

condenser (A).

The lower ventilation grille should be flush with the floor of the vehicle, allowing

any gas leakages (heavier than air) to escape directly into the open air.

If such an arrangement is not possible a hole must be provided under the refrigerator

(not close to the burner) so that any leaking LP gas can escape. This must have an

effictive area of at least 13cm². It is desirable to fit the hole with wire mesh or similar,

and an angle plate to protect it from stones, mud etc., the wire mesh must not reduce

the effective area of 13cm² ( EN 1949).

The ventilation grilles must have an open cross-section of at least 250 cm2.

This is reached using the Dometic Absorber Ventilation and Air Extraction

System L100 / L 200 that has been tested and approved for this purpose.

Comment:

If the distance between the wall and the refrigerator is greater than 20 mm the gap

can be reduced to 20 mm by fitting a suitable baffle piece.

with step

without step

15-20mm

13cm²

Deviations shall require the consent of the

manufacturer.

6.3

Correct mounting of the lower ventilation grille facilitates the access to

the electrical and gas connections during maintenance work.

Installing the ventilation system6.4

3. Insert the ventilation grilles.

6. Insert winter cover

2. Insert the frame ...

4. Lock the ventilation grilles..

5.Clip the extractor insert in position

(only for upper ventilation system L100)

... and screw into position.

1. Seal the mounting frame, making it waterproof.

Item 1 does not apply for installation framess with an

integrated seal.

To install the ventilation grilles, cut two rectangles (451mm x 156mm) in the

outer wall of the vehicle (for position of the cuts, see point 6.3).

L100

L200

Page is loading ...

Dometic RM 7290 L User manual

Brand: Dometic

Model: RM 7290 L

Category: Fridge-freezers

Type: User manual

Download PDF

report

Dometic RM 7290 L User manual

Dometic RM 7290 L User manual

Related papers

Other documents