Channel Plus 2100A User manual

Channel Plus
Brand
Channel Plus
Model
2100A
Type
User manual
Warranty
600-008 Rev A
600-008 Rev A
Multiplex Technology, Inc. warrants this product to be free
from defects in materials and workmanship for a period of
one year from the date of purchase or MTI will repair, or at
its option, replace the defective product. To obtain
warranty service, call MTI for a return material
authorization (RMA) number and return the product
prepaid to Multiplex Technology, Inc., 3001 Enterprise
Street, Brea, CA 92821, Attention: Customer Service.
Please put the RMA number on the outside of the carton.
Any implied warranty arising from the sale of the product
including implied warranties of merchantability and fitness
for purpose are limited to the warranty stated above. MTI
shall not be responsible for losses or damages or
expenses, whether direct, consequential or incidental
arising from the use of or the inability to use this product.
Some states do not allow limitations on how long the
implied warranty lasts or the exclusion or limitation or
incidental or consequential damages, so the above
limitations and exclusions may not apply to you. This
warranty gives you specific legal rights, and you may have
other rights which may vary from state to state.
Multiplex Technology, Inc., Brea, CA 92821
Multiplex Technology, Inc., Brea, CA 92821
Channel
R
3001 Enterprise Street, Brea, CA 92821-6213, U.S.A.
714-996-4100 * 800-999-5225 * FAX 714-996-4900 * www.channelplus.com
multiplex
technology, inc.
®
Whole House IR Control
POWER
LED
EMITTER
LED
EMITTER
TARGET
TO
TV
TO
TV
Model 2100A
IR Wall Plate
(for 12V IR systems)
2
POWER
LED
EMITTER
LED
EMITTER
TARGET
TARGET
TO
TV
TO
TV
VCR
Satellite
Receiver
DVD player
DVD player
12V IR target
model 2132 shown
Pushing a button on
the remote control
in the bedroom ...
1
POWER
LED
EMITTER
LED
EMITTER
TARGET
TARGET
TO
TV
TO
TV
Basic principal of IR repeating
controls the video equipment
in the media room by
repeating the IR pulses.
2
Bedroom
Media room or equipment closet
Modulator allow you to watch any
video source on any TV in the house.
TV signals
Model 2100A
Model 2100A
3
The 2100A must be powered
by a 12V IR engine.
POWER
LED
EMITTER
LED
EMITTER
TARGET
TO
TV
TO
TV
POWER
LED
EMITTER
LED
EMITTER
TARGET
TO
TV
TO
TV
POWER
LED
EMITTER
LED
EMITTER
TARGET
TO
TV
TO
TV
POWER
LED
EMITTER
LED
EMITTER
TARGET
TO
TV
TO
TV
Targets or emitters may be
connected to any or all 2100As.
DA-550 and 3208A
support up to 8 2100As.
3212A supports up to 12
2100As
MODEL 2507
75 ohm terminator
MODEL 2501
DC block
Terminating unused outputs is optional.
If you choose to terminate, use only F terminators
with a DC block. Otherwise, you will short out the IR
engine and trip the internal circuit breaker. (Remove
power to reset circuit breaker.)
IR
EMITTERS
POWER
15VDC
SYSTEMPOWER
FROM
MODULATORS
OUT OUT OUT
OUT
OUT
Model2514A 5MHzto 1000MHz
SPLITTER
IN
IN
IN
IN
IN
COMBINER
Use a DC-block when
you are NOT using the 2100A.
POWER
LED
EMITTER
LED
EMITTER
TARG ET
TO
TV
TO
TV
POWER
POWER
LED
EMITTER
LED
EMITTER
TARGET
TO
TV
TO
TV
POWER
LED
EMITTER
LED
EMITTER
TARG ET
TARGET
TO
TV
TO
TV
MODEL 2514
Use only splitters that pass IR.
Option 1 - Coax panel with 12V IR engine
Model 3208A, 3212A, DA-550HHR or DA-550BID.
Option 2 - Model 2010
Model 2010
LED glows when IR engine is powered
up. If LED does not glow, the IR engine
circuit breaker may be tripped.
Remove power to reset circuit breaker.
Model 2100A
Model 2100A
RG-6 coax
  • Page 1 1
  • Page 2 2

Channel Plus 2100A User manual

Channel Plus
Brand
Channel Plus
Model
2100A
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents