Lenovo Xtension Selfie Flash SF100 Quick start guide

Type
Quick start guide

Lenovo Xtension Selfie Flash SF100

With the Lenovo Xtension Selfie Flash SF100, you can take better pictures in low-light conditions. It is a small and lightweight device that plugs into your smartphone's headphone jack. The flash has 8 powerful LED lights that provide 160 lumens of brightness and a color temperature of 4500K. It can take over 100 pictures on a single charge.

To use the flash, plug it into your smartphone's headphone jack and turn on the camera app. You can then press the flash button to take a picture, or simply turn on the flash and press the camera button. The flash will automatically adjust to the brightness of the surrounding environment.

Lenovo Xtension Selfie Flash SF100

With the Lenovo Xtension Selfie Flash SF100, you can take better pictures in low-light conditions. It is a small and lightweight device that plugs into your smartphone's headphone jack. The flash has 8 powerful LED lights that provide 160 lumens of brightness and a color temperature of 4500K. It can take over 100 pictures on a single charge.

To use the flash, plug it into your smartphone's headphone jack and turn on the camera app. You can then press the flash button to take a picture, or simply turn on the flash and press the camera button. The flash will automatically adjust to the brightness of the surrounding environment.

Lenovo Selfie Flash SF100
Lenovo
Quick Start Manual
User
Manual
User Manual Warranty Card
Micro-USB adapter (optional) USB adapter
Selfie Flash
Package Contents
Actual product and accessories may vary. Before use, please check
that your package contains the following items. Please contact your
retailer if anything is missing.
1 EN
Basic Specifications of Product
Product name: Lenovo Selfie Flash
Product model: SF100
Charging voltage and current: 5V 45mA
Brightness: 160 lm
Color temperature: 4500K
Number of pictures (when fully charged): > 100
Dimension: 68 mm*36 mm*8.15 mm
Product weight: 10g
Working temperature: -20˚C~40˚C
2 EN
Figure 1 Figure 2
Product use
Plug the Selfie Flash into the headphone jack (see Figure 1), turn on
the camera application, and use the front camera.
Method 1:
Press the flash button to take a picture.
Applicable models: VIBE Shot, VIBE S1, VIBE P1, Lenovo PHAB
series, etc.
Method 2:
Turn on the flash, and press the corresponding camera button to take
a picture.
Applicable models: all the models.
3 EN
4 EN
Charging
Low battery power: The red indicator blinks once every 3s;
Charging: The red indicator blinks once every second;
Full charge: The red indicator is normally on.
The charging method is shown below:
Micro-USB adapter (optional) USB adapter
Figure 3 Figure 4
5 EN
Please note:
1. This product uses powerful light sources to obtain better
photographic results. Please avoid looking at it directly for long
periods of time.
2. Please do not allow children to play with this product.
3. Do not disassemble or repair the product and accessories without
permission.
4. If you do not use the product for a long time, please keep it in a dry,
dust-free place at a stable temperature.
5. After unpacking, please fully charge the product before use.
Maintenance Instructions
Only 4 LED lights light up after the product is turned on: This
product has a total of 8 LED lights, and 4 lights form 1 group. This
shows that there is poor contact internally due to damage.
LED lights do not light up after the product is turned on: Battery
power is too low, please charge.
80000639
Printed in China
V1.0_20150716
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Lenovo Xtension Selfie Flash SF100 Quick start guide

Type
Quick start guide

Lenovo Xtension Selfie Flash SF100

With the Lenovo Xtension Selfie Flash SF100, you can take better pictures in low-light conditions. It is a small and lightweight device that plugs into your smartphone's headphone jack. The flash has 8 powerful LED lights that provide 160 lumens of brightness and a color temperature of 4500K. It can take over 100 pictures on a single charge.

To use the flash, plug it into your smartphone's headphone jack and turn on the camera app. You can then press the flash button to take a picture, or simply turn on the flash and press the camera button. The flash will automatically adjust to the brightness of the surrounding environment.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI