The Intermec CK61ex Handheld Computer Scan Handle is
designed for better ergonomics for higher-volume scanning
applications. The scan handle provides a trigger to activate
reading the bar code.
To install the scan handle
1 Slide the scan handle onto the anchor post.
2 Twist the turnbuckle clockwise a quarter turn and press the
turnbuckle down to secure it into place.
Installing the Scan Handle
CK61ex Scan Handle Instructions
Scan
handle
Anchor
post
Turnbuckle
Retaining
socket
CK61ex Scan Handle Instructions
*943-153-001*
P/N 943-153-001
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
©
2007 Intermec Technologies
Corporation. All rights reserved.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI