VTech LS6001A Quick start guide

Category
Telephone handsets
Type
Quick start guide

VTech LS6001A is a cordless handset designed for use with the LS6191A telephone base. It allows you to make and receive calls, as well as access other features of your phone system, such as caller ID and voicemail. The LS6001A comes with a rechargeable battery that provides up to 10 hours of talk time or 100 hours of standby time. It also has a range of up to 300 feet from the base unit, giving you the freedom to move around your home or office while on a call. Additionally, the LS6001A can be paired with up to four other handsets, allowing you to expand your phone system as needed.

VTech LS6001A is a cordless handset designed for use with the LS6191A telephone base. It allows you to make and receive calls, as well as access other features of your phone system, such as caller ID and voicemail. The LS6001A comes with a rechargeable battery that provides up to 10 hours of talk time or 100 hours of standby time. It also has a range of up to 300 feet from the base unit, giving you the freedom to move around your home or office while on a call. Additionally, the LS6001A can be paired with up to four other handsets, allowing you to expand your phone system as needed.

1
Connect the Charger
Plug the power adapter cable into the charger, plug the other end into the wall jack and switch the power on.
NOTES
Ensure the power cord is fed through the slot on the charger so the unit sits ush with the desk.
The position in which you place the charger could have an effect on the range and performance of your LS6001A handset.
Install the battery
Slide open the battery compartment cover. Place the battery pack into the battery compartment, with the battery
connector plugged in, as shown.
Place the rechargeable battery and the wires inside the battery compartment.
Slide the battery compartment cover back until it clicks into place.
Place the handset on the base charging cradle to charge for at least 14 hours. A beep indicates that the handset is
properly placed on the base.
NOTES
This handset requires specic NiMH rechargeable batteries for use.
If you do not use the handset for a long time, disconnect and remove the batteries to prevent possible leakage.
1.
1.
2.
3.
4.
LS6001A Additional Handset
Quick Start Guide
Package Contents
LS6001A handset
Handset charger and power adapter
NiMH rechargeable battery pack
Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Insert battery connec
tor to HS
Place battery
in HS
Slide the battery
compartment cover
Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Insert battery connec
tor to HS
Place battery
in HS
Slide the battery
compartment cover
Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Insert battery connec
tor to HS
Place battery
in HS
Slide the battery
compartment cover
1 2 3
4
$FFHVVRU\
&25'/(667(/(3+21(
$&9P$
97HFK&XVWRPHU6HUYLFH

ZZZYWHFKSKRQHVFRP
$&9
8VH2QO\
6XSSOLHG
$GDSWHU
$FFHVVRU\
&25'/(667(/(3+21(
$&9P$
97HFK&XVWRPHU6HUYLFH

ZZZYWHFKSKRQHVFRP
$&9
8VH2QO\
6XSSOLHG
$GDSWHU
Charger
$FFHVVRU\
&25'/(667(/(3+21(
$&9P$
97HFK&XVWRPHU6HUYLFH

ZZZYWHFKSKRQHVFRP
$&9
8VH2QO\
6XSSOLHG
$GDSWHU
Wall jack
Power adapter
cable
DC 6V
2
Registering an Additional Handset
The LS6001A additional handset must be registered to the LS6191A telephone base before use. When rst
purchased, each expansion handset alternately shows To register HS... and ...see manual. The new handset should
be charged without interruption for at least 30 minutes before registering it to the telephone base. To register the
additional handset to your LS6191A, follow the instructions below.
To register a handset:
At the bottom of the telephone base, press and hold PAGE for about four seconds
until it shows Registering...
On the cordless handset, press # then it shows Registering... Both the telephone
base and cordless handset show Registered and you hear a beep when the
registration process completes. The registration process takes about 60 seconds
to complete.
If registration fails, the handset displays Failed. Please start again from Step 1 above.
NOTES
You cannot register a handset if any other system handset is in use.
If you have not set the date and time for the telephone system, the handset will prompt you to set the
date and time after it is registered to the base. To skip setting, press CANCEL.
1.
2.
If you have any difculty with the operations of LS6001A handset or LS6191A base station, refer to your
LS6191A Users manual.
For technical support, please call VTech Technical Inquiry Hotline.
© 2015 VTech Telecommunications Ltd. All Rights Reserved.
1 / 1

VTech LS6001A Quick start guide

Category
Telephone handsets
Type
Quick start guide

VTech LS6001A is a cordless handset designed for use with the LS6191A telephone base. It allows you to make and receive calls, as well as access other features of your phone system, such as caller ID and voicemail. The LS6001A comes with a rechargeable battery that provides up to 10 hours of talk time or 100 hours of standby time. It also has a range of up to 300 feet from the base unit, giving you the freedom to move around your home or office while on a call. Additionally, the LS6001A can be paired with up to four other handsets, allowing you to expand your phone system as needed.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document