Southbend KELT-40 User manual

Category
Flat panel accessories
Type
User manual

This manual is also suitable for

Job Item#
www.yatesgd.com www.yatesgraphicdesign.com
ELECTRIC STEAM
TILTING KETTLE
Printed in USA
Form KELT Rev 0 (01/07)
MODEL CAPACITY
KELT-20 20 Gallon 76 Liter
KELT-30 30 Gallon 114 Liter
KELT-40 40 Gallon 152 Liter
KELT-60 60 Gallon 227 Liter
KELT-80 80 Gallon 303 Liter
KELT-100 100 Gallon 379 Liter
SPECIFICATIONS:
Shall be a Model__________________________________ ,
self-generating, electric tilting kettle. A double wall kettle interior
shall form a steam jacket around the lower 2/3 of the kettle.
The jacket enclosure shall contain distilled water which is factory
sealed. The bottom of the kettle shall be of hemispherical design
for superior heat circulation.
The console shall be drip proof, stainless steel clad and shall
be supported on all welded, 1-5/8" (41mm) diameter stainless
steel frame and legs fitted with 4 hole adjustable flanged feet
for securing to floor.
The kettle shall pivot on trunnions connected to the tilt
mechanism and the outbore bearing connected to the frame
and shall permit the kettle to tilt forward a full 90 for complete
emptying. The tilt mechanism shall be self locking for positive
stop action.
Construction shall be all welded #4 finish stainless steel, type
304. The controls shall be integrally mounted and shall include
a power switch, thermostat, pilot light, low water light, vacuum/
pressure gauge, safety relief valve, and low water shut off.
The kettle shall be standard with removable elements.
The kettle shall operate in a temperature range of 100°F to
290°F (38°C to 144°C) at a maximum pressure of 50 psi
(345kPa).
OPERATION SHALL BE BY:
Electrically, self-generating closed steam system operating at 50 psi
equipped for operation on:
208 VAC, 3 Phase, 50/60 Hz
208 VAC, 1 Phase, 50/60 Hz*
240 VAC, 3 Phase, 50/60 Hz
240 VAC, 1 Phase, 50/60 Hz*
OPTIONAL ITEMS AT EXTRA COST:
Type 316 stainless steel liner for high acid content products
1-1/2" (38 mm) draw off valve
2" (50 mm) draw off valve
3" (76 mm) draw off valve
2" (50 mm) dairy valve
3" (76 mm) dairy valve
24 kw on 40, 60, 80 gallon
33 kw on 60, 80, 100 gallon
220 VAC, 1 Phase, 50/60 Hz*
220 VAC, 3 Phase, 50/60 Hz
380 VAC, 3 Phase, 50/60 Hz
415 VAC, 3 Phase, 50/60 Hz
480 VAC, 3 Phase, 50/60 Hz
220/380 VAC, 3 Phase, 4 wire
240/415 VAC, 3 Phase, 4 wire
One piece lift off stainless steel cover
Spring assist hinged stainless steel cover
Etched gallon markings
Etched litre markings
Correctional package
*20 and 30 gallon only
ACCESSORIES:
ˆ Triple basket assembly
ˆ Perforated strainer for draw off
ˆ Solid stainless steel disc for draw off valve
ˆ Graduated measuring stick
ˆ Strainer hook
ˆ Double pantry faucet with swing spout
ˆ Single pantry faucet with swing spout
ˆ Pan support
ˆ Pour strainer
ˆ Calibrated thermostat dial “C”
ˆ Calibrated thermostat dial “F”
*Kettle shown with
Optional Spring Assist Cover
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
Models:
www.yatesgd.com www.yatesgraphicdesign.com
KELT-20 KELT-30 KELT-40 KELT-60 KELT-80 KELT-100
INTENDED FOR COMMERCIAL USE ONLY.
NOT FOR HOUSEHOLD USE.
Form KELT Rev 0 (0107)
MODEL CAPACITY UNITS A B C D E F G H J(2") J(3") K(2") K(3") L M
KELS-20
20 gallons
(76 liters)
in
(mm)
21"
(533)
18"
(457)
38"
(965)
36"
(914)
15"
(381)
18"
(457)
14"
(356)
19.25"
(489)
14.75"
(375)
15.5"
(394)
18"
(457)
17.5"
(445)
N/A
63.5"
(1613)
KELS-30
30 gallons
(114 liters)
in
(mm)
24"
(610)
20"
(508)
38"
(965)
39"
(990)
16.5"
(419)
23"
(584)
12.375"
(314)
19.25"
(489)
16.75"
(425)
17.25"
(438)
16"
(406)
15.5"
(394)
N/A
66.5"
(1689)
KELS-40
40 gallons
(152 liters)
in
(mm)
26"
(660)
22.5"
(572)
38"
(965)
41"
(1041)
17.5"
(445)
18"
(457)
10"
(254)
20.25"
(514)
17.5"
(445)
18.5"
(470)
13.5"
(343)
13"
(330)
N/A
68.5"
(1740)
KELS-60
60 gallons
(227 liters)
in
(mm)
29.5"
(749)
26"
(660)
42"
(1067)
44.5"
(1130)
19.125"
(486)
24"
(610)
11"
(280)
22.25"
(565)
19.5"
(495)
20.75"
(527)
14"
(356)
13.5"
(343)
10.5"
(267)
76"
(1930)
KELS-80
80 gallons
(303 liters)
in
(mm)
33"
(838)
28"
(711)
45"
(1143)
48"
(1219)
20.875"
(530)
27"
(686)
12.625"
(321)
23.75"
(603)
20.25"
(514)
21.25"
(540)
15"
(381)
14.5"
(368)
12"
(305)
82.5"
(2096)
KELS-100
100 gallons
(379 liters)
in
(mm)
35.5"
(902)
30"
(762)
48"
(1219)
49.5"
(1257)
22.25"
(565)
32"
(813)
14.5"
(368)
25.25"
(641)
20.25"
(514)
21.25"
(540)
18.75"
(476)
18.25"
(464)
14"
(356)
88.5"
(2248)
AVAILABLE KW AMPS PER LINE
MODEL STANDARD OPTIONAL KW PHASE 208V 220V 240V 380V 415V 480V
KELT-20 12 N/A 12 1 57.7 54.5 50.0 N/A N/A N/A
KELT-30 15 N/A 12 3 33.3 31.5 28.9 18.2 16.7 14.4
KELT-40 18 24 15 1 72.1 68.2 62.5 N/A N/A N/A
KELT-60 18 24, 33 15 3 41.6 39.4 36.1 22.8 20.9 18.0
KELT-80 18 24, 33 18 3 50.0 47.2 43.3 27.3 25.0 21.7
KELT-100 24 33 24 3 66.6 63.0 57.7 36.5 33.4 28.9
33 3 91.6 86.6 79.4 50.1 45.9 39.7
SERVICE CONNCETIONS
– ELECTRICAL CONNECTION : to be specified on dataplate
ELECTRICAL CHARACTERISTICS
DIMENSIONS
  • Page 1 1
  • Page 2 2

Southbend KELT-40 User manual

Category
Flat panel accessories
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI