SMART Technologies Hub PE260 Installation guide

Type
Installation guide
SMART Hub PE260
Cautions, warnings and other important product information are contained in the SMART Hub
PE260 Multi-language Warnings Document, document 123005 at www.smarttech.com/support.
yy (×6)
xx (×6)
#6
zz (×6)
NA
UK
EU
yy (×6)
SMART Hub PE260
R
E
V
0
.
3
-
1
8
J
u
n
e
2
0
0
8
99-00897-20 REV A0
QuickReference
SMARTHub PE260
How do I get started?
Togetstarted:
1. If the power indicator on the SMART Hub PE260 isred,press it to turn on the unit.
2. Turn on the projectors or displays connected to the SMART Hub PE260.
3. If a login dialog box appears, log in using the name and password provided by your system administrator.
TheWelcomeCenter appears.
4. Press the desired button.
PowerIndicator
Capturenotesand present
informationusing
Whiteboard.*
Collaboratewithothers
usingBridgit™
conferencingsoftware.*
UseSMARTtools with
Whiteboard.*
Viewyouroffice files.*
Orientyour
SMARTproduct.
Configurethe
SMARTHubPE260.
Movethemenu barto
thetopor bottom
ofthedisplay.
ViewonlineHelp.
*Seereverse fordetails.
99-00866-20REVC0 1
ImportantInformation
WichtigeInformationen
Informaciónimportante
WARNING • Failure to follow the installation instructions shipped with your SMART Board product
couldresultin personal injury and damage to the product.
• Ensure that any cables extending across the floor to your SMART Board product are
properlybundledand marked to avoid a trip hazard.
• Make sure an electrical socket is near your SMART Board product and remains easily
accessibleduringuse.
• Toreduce the risk of fire or electric shock, do notexpose the SMART Board productto
rainormoisture.
• Don’t open or disassemble the SMART Board product. Opening the casing voids your
warranty.
• The external power supply (when required) needs to meet the Limited Power Source
(LPS)requirementsof CSA/UL/IEC/EN 60950-1.
WARNUNG •Sollten die Aufbauanleitungen, die mit dem SMART Board-Produkt geliefert wurden,
nichtbeachtetwerden, kann dies zu Verletzungen der Bediener sowie Schäden am
Produktführen.
• Stellen Sie sicher, dass alle Kabel, die über den Boden zum SMARTBoard-Produkt
laufen,ordnungsgemäßgebündelt und markiert sind, damit keine Stolpergefahr
besteht.
• Stellen Sie sicher, dass sich in der Nähe des SMARTBoard-Produkts eine Steckdose
befindetunddass sie während der Verwendung leicht zugänglich bleibt.
• Um das Risiko eines Feuers oder eines Stromschlags zu reduzieren, darf das SMART
Board-ProduktwederRegen noch Nässe ausgesetzt werden.
• Öffnen oder zerlegen Sie nicht das SMART Board Produkt. Durch Öffnen des
GehäusesverfälltIhre Garantie.
• Den eksterne strømforsyning (hvor en sådan er påkrævet) skal opfylde LPS-kravene
(LimitedPowerSource) i CSA/UL/IEC/EN 60950-1.
ADVERTENCIA Noseguir las instrucciones de instalación que se facilitan con el producto SMART
boardpuedeocasionar lesiones personales y daños en el producto.
• Asegúrese de que cualquier cable que vaya por el suelo hasta el producto SMART
Boardestébien sujeto y marcado para evitar cualquier tropiezo.
• Asegúrese de que el producto SMART Board se sitúe junto a una toma de corriente y
dequeésta permanezca fácilmente accesible durante su uso.
• Para reducir el riesgo de incendio o de descarga eléctrica, no exponga el producto
SMART Boardala lluvia o la humedad.
• No abra ni desarme el producto SMART Board. Si se abre el gabinete se anula la
garantía.
• La fuente de alimentación externa (en los casos en que sea necesaria) debe cumplir
conlosrequisitos para fuentes de alimentación limitadas (LPS, por sus siglas en
inglés)dela normativa CSA/UL/IEC/EN 60950-1.
99-00866-20REV C0 1
Important Information
Wichtige Informationen
Información importante
WARNING Failureto follow the installation instructions shipped with yourSMART Board product
couldresult in personal injury and damage to the product.
Ensurethatany cables extending across the floor to your SMART Board product are
properlybundled and marked to avoid a trip hazard.
Makesurean electrical socket is near your SMART Board product and re mains easily
accessibleduring use.
Toreduce the risk of fireor electric shock, do not expose the SMART Board product to
rainor moisture.
Don’topen or disassemble the SMART Board product. Opening th e casing voids your
warranty.
Theexternal power supply (when required) needs to meet the Limited Power Source
(LPS)requirements of CSA/UL/IEC/EN 60950-1.
WARNUNG Sollten die Aufbauanleitungen, die mit dem SMART Board-Produkt geliefert wurden,
nichtbeachtet werden, kann dies zu Verletzungen der Bediener sowie Schäden am
Produktführen.
StellenSie sicher, dass alle Kabel, die über den Boden zum SMART Board-Produkt
laufen,ordnungsgemäß gebündelt und markiert sind, damit keine Stolpergefahr
besteht.
StellenSie sicher, dass sich in der Nähe des SMART Board-Produkts eine Steckdose
befindetund dass sie während der Verwendung leicht zugänglich bleibt.
UmdasRisiko eines Feuers oder eines Stromschlags zu reduzieren, darf das SMART
Board-Produktweder Regen noch Nässe ausgesetzt werden.
Öffnenoder zerlegen Sie nicht das SMART Board Produkt. DurchÖffnen des
Gehäusesverfällt Ihre Garantie.
Deneksterne strømforsyning (hvor en sådan er påkrævet) skal opfylde LPS-kravene
(LimitedPower Source) i CSA/UL/IEC/EN 60950-1.
ADVERTENCIA Noseguirlas instrucciones de instalación que se facilitan con el producto SMART
boardpuede ocasionar lesiones personales y daños en el producto.
Asegúresedeque cualquier cable que vaya por el suelo hasta el producto SMART
Boardesté bien sujeto y marcado para evitar cualquier tropiezo.
Asegúresedeque el producto SMART Board se sitúe junto a una toma de corriente y
deque ésta permanezca fácilmente accesible durante su uso.
Parareducirel riesgo de incendio o de descarga eléctrica, no exponga el producto
SMART Boarda la lluvia o la humedad.
Noabrani desarme el producto SMART Board. Si se abre el gabinete se anula la
garantía.
Lafuentede alimentación externa (en los casos en que sea necesaria) debe cumplir
conlos requisitos para fuentes de alimentación limitadas (LPS, por sus siglas en
inglés)de la normativa CSA/UL/IEC/EN 60950-1.
SMART Hub PE260 Registration
By registering you’ll receivecontinued customer support and notification
of new models and software upgrades .
*Required
Date of Purchase*____________________ Serial Number* _______________________________
Name* ___________________________________________________________________
Title ___________________________________________________________________
Organization* ___________________________________________________________________
Address* ___________________________________________________________________
City* ___________________________________________________________________
State/Province ___________________ Zip/Post al Code ____________ Country* _________
Phone ___________________ Fax ___________________________________________
E-mail* ___________________________________________________________________
Youcan also register online at www.smartte ch.com/products/regis tration.
SMART Hub PE260
www2.smarttech.com/
kbdoc/127260
www2.smarttech.com/
kbdoc/127259
www2.smarttech.com/
kbdoc/123005
1
6
USB
1
2
A
C
B
D
4
3
xx
×6
×3
zz (×6)
www.smarttech.com/support www.smarttech.com/contactsupport
Support +1.403.228.5940 or Toll Free 1.866.518.6791 (U.S./Canada)
© 2008 SMART Technologies ULC. All rights reserved. The SMART logo and smarttech are trademarks or registered trademarks of SMART
Technologies ULC in the U.S. and/or other countries. All other third-party product and company names may be trademarks of their respective
owners. Other patents pending.
Contents are subject to change without notice. 07/2008.
99-00896-20 REV B0
Waste Electrical and Electronic Equipment Regulations
This section contains information about the Waste Electrical and Electronic Equipment Regulations (WEEE) that apply to all electrical and electronic equipment within the
European Union.
When you dispose of any electrical or electronic equipment, including SMART products, we strongly encourage you to contact your local WEEE recycling agency for
recycling and disposal advice.
Your SMART product required the extraction and use of natural resources for its production. It may contain hazardous substances.
By disposing of electrical and electronic equipment appropriately, you lower the impact of these substances upon health and the environment and reduce the pressure on
natural resources. Recycling agencies can reuse or recycle most of the materials from your product.
Please think about how you intend to dispose of any product that has a WEEE symbol or accompanying WEEE guidelines.
If you need more information on the collection, reuse and recycling of electrical and electronic equipment, please contact your local WEEE recycling agency. Alternatively, contact your local reseller
or SMART Technologies for information on the environmental performance of our products.
5
6
4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

SMART Technologies Hub PE260 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI