INSTRUCTION MANUAL
Model Number: HE180247
VERSION 1.0
HIGH GAIN
INDOOR ANTENNA
32
After Sales SupportAfter Sales Support
1300 663 9071300 663 907
Model Number HE180247
Model Number HE180247
Warranty Details
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for a period
of 12 months from the date of purchase. Defects that occur within this warranty period, under
normal use and care, will be repaired, replaced or refunded at our discretion. The benets
conferred by this warranty are in addition to all rights and remedies in respect of the product
that the consumer has under the Competition and Consumer Act 2010 and similar state and
territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
AFTER SALES SUPPORT
MODEL: HE180247 PRODUCT CODE: 7350 04/2019
REGISTER YOUR PURCHASE ATwww.aldi.com.au/en/about-aldi/product-registration/TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
1300 663 907
AUS
INDOOR ANTENNA
YEAR WARRANTY
1
54
After Sales SupportAfter Sales Support
1300 663 9071300 663 907
Model Number HE180247
Model Number HE180247
Contents
Warranty Details 3
Welcome 5
Safety Instructions 5
Parts List 6
Technical Specications 7
Features 7
Power 7
1.1 Check your Coverage 7
Setup Instructions 8
2.1 Setting up your Indoor Antenna 8
2.1.1 Angle 8
2.1.2 Location 8
2.1.3 Amplication 8
2.1.4 Connecting 8
2.2 Mounting the Antenna 9
Tips and Troubleshooting 10
Frequently Asked Questions 11
Repair and Refurbished Goods or Parts Notice 12
Congratulations on choosing to buy a Cocoon™ product. By doing so you now have the assurance
and peace of mind that comes with purchasing a product made by one of the leading manufacturers.
All products brought to you by Cocoon™ are manufactured to the highest standards of performance
and safety and, as part of our philosophy of customer service and satisfaction, are backed by our
comprehensive 1 Year Warranty. We hope you will enjoy using your purchase for many years to come.
Read this manual thoroughly before rst use and keep it in a safe place for future reference, along
with the purchase receipt and carton. The safety precautions enclosed herein reduce the risk of re,
electric shock and injury when correctly adhered to. Follow all instructions and take notice of all
warnings to reduce the risk of re or electric shock.
• Do not expose this product to water, rain, moisture or dust. Electronic products of this kind
should never be subjected to moisture or extreme temperatures
• Do not attempt to open the product housing. There are no user-serviceable parts inside
this product
• Do not repair the unit yourself. If your device is not functioning correctly, disconnect the product
from power, and contact after sales support
• Supervise young children to ensure they do not play with the product
• Do not expose to water, dust, moisture, chemicals, oils, or other liquids
• Do not expose to naked ames or other heat sources
• Do not drop or subject the device to undue shock
• Keep device away from magnets at all times
• Keep away from direct sunlight. Indoor use only
• Unplug this device during lightning storms or when unused for long periods of time
• The socket outlet should be installed near the equipment and should be easily accessible
Welcome
Safety Instructions
76
After Sales SupportAfter Sales Support
1300 663 9071300 663 907
Model Number HE180247
Model Number HE180247
Parts List Technical Specications
Features
Power
1. 1 x Slim Line High Gain Antenna
2. 1 x External Amplier
3. 1 x Power Adaptor*
4. 1 x Mounting Accessories*
5. 1 x Instruction Manual*
6. 1 x Warranty Card*
*3, 4, 5 and 6 not pictured
Frequency: VHF (174-230MHz), UHF (470-694MHz)
Gain: VHF (17dB), UHF (23dB)
Impedance: 75 Ω
Input voltage: AC 230-240V
Operating Power: DC 6V 100mA
Connector: IEC-connector Male
Dimensions: 43 x 3 x 5cm
• Receive HD, digital and local VHF/UHF signals
• Slimline design to t seamlessly within your home interior
• Adjustable bracket to t most at panel TVs - Either, over or behind the TV
• Multi-directional reception
• External amplier to enhance reception
• Easy Installation
Operate with or without power depending on strength of signal
1.1 Check your Coverage
Check your reception coverage in your area by
visiting http://myswitch.digitalready.gov.au/
and entering your address. This antenna is
suitable for areas with Good Coverage. If your
address does not have Good Coverage, you
may not be able to pick up all digital channels
with this antenna and a rooftop antenna may
be necessary.
1
2
98
After Sales SupportAfter Sales Support
1300 663 9071300 663 907
Model Number HE180247
Model Number HE180247
Setup Instructions
Setup Instructions
2.1 Setting up your Indoor Antenna
Use the following guide to ensure that the best reception signal can be achieved.
Variables unrelated to product performance can aect reception. These include obstacles and
terrain between the transmitter and your antenna, radiated energy from electronic components
and building materials such as concrete or aluminium panelling. Consider these factors during
installation. For best results, test the antenna in multiple locations until you nd a position that
provides the best reception.
2.1.1 Angle
Position the back of the Antenna to be facing the strongest transmission
tower. (Indicated on http://myswitch.digitalready.gov.au by the green line)
2.1.2 Location
Placing the Antenna near a window will also increase the signal strength
2.1.3 Amplication
Adjust the amplication dial until a strong signal is achieved. Some
areas won’t require amplication, meaning the adaptor is not
required. Try dierent angles, locations and amplication levels until
a strong signal is achieved for all channels.
2.1.4 Connecting
Connecting the antenna to a TV
1. Connect the antenna cable to the amplier
2. Connect the amplier to the antenna input on your TV
3. Connect the power adaptor to the DC6V socket on amplier
4. Plug the power adaptor into a mains power point and switch the power point on
5. Tune channels as per your TV instruction manual
6. Adjust the amplication dial on the amplier until you achieve the clearest signal
Connecting the antenna to a set top box
1. Connect the antenna cable to the amplier
2. Connect the amplier to the antenna input on your set top box
3. Connect the power adaptor to the DC6V socket on amplier
4. Plug the power adaptor into a mains power point and switch the power point on
5. Tune channels as per your set top box instruction manual
6. Adjust the amplication dial on the amplier until you achieve the clearest signal
TIP: Areas with strong signals may not require the amplier. If you are not receiving a signal,
try unplugging the amplier
2.2 Mounting the Antenna
1. Pick a suitable location where your antenna will be installed, then mark out two dots with a
grey lead pencil 50mm apart. Ensure you have left enough space to plug the antenna into
your TV or set top box. Also ensure your cable is long enough to reach your TV or set top box
2. Drill two holes through the wall 50mm apart. Ensure there is no wiring or pipes in or behind
the wall
3. Insert the screw plugs into the drilled holes then using the Phillips-head screw driver,
screw the provided screws into the screw plugs leaving a 5mm gap between the head of the
screw and the wall
4. If you are using the hook and loop adhesive, please note these are for use when adhering the
antenna to a desk or TV. These are not wall safe. If adhering to TV ensure the antenna is placed
at the rear and not on the screen
WARNING: Ensure there are no cables, wiring or pipes in the wall you are screwing into
NOTE: Please check your antennas service before installation of the mounting bracket to ensure best
service results
1110
After Sales SupportAfter Sales Support
1300 663 9071300 663 907
Model Number HE180247
Model Number HE180247
Frequently Asked Questions
Question Solution
Do I have to use the amplier? The power adaptor can improve the signal in
some cases. If you are already receiving a good
signal you do not need to use the amplier.
What can I do to improve my reception? You need to nd the best signal for the
antenna. This can often be achieved by moving
the antenna to face dierent directions or
dierent locations. Also try to adjust the
dipoles and amplier strength.
Follow the guide in section 2.1 Setting up
your Indoor Antenna on page 8 to
maximise the signal received by the antenna.
Why are some channels not appearing on
my TV or set top box?
After connecting the antenna, make sure you
scan for new channels in your TV or set top
box’s channel menu, otherwise they may not
appear when you try to change channels.
Can I use this antenna outdoors? This antenna is designed for indoor use only.
• Move the antenna around to nd the best place for reception in your room
• Never mount the antenna until you have tested the antenna in that location
• Some locations are not suitable for indoor antennas. If you are still having diculty producing
an adequate signal after all steps in this manual have been attempted, a rooftop antenna may
be required
• In regions with very strong reception signals, too much amplication can result in a poor picture.
Plug the antenna directly into your TV/set top box without the amplier to improve the reception
Tips and Troubleshooting
1312
After Sales SupportAfter Sales Support
1300 663 9071300 663 907
Model Number HE180247
Model Number HE180247
Repair and Refurbished Goods
or Parts Notice
Unfortunately, from time to time, faulty products are manufactured which need to be returned
to the Supplier for repair.
Please be aware that if your product is capable of retaining user-generated data (such asles
stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs
stored on a portable media player, games saved on a games console or les stored on a USB
memory stick) during the process of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them with
refurbished goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used where they
meet ALDI’s stringent quality specications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your
complaint. Please telephone us on1300 663 907 or write to us at:
Winplus Australasia
PO Box 537 Bayswater Business Centre, Victoria, Australia
1300 663 907 - Hours: Mon-Fri 8:30am - 6:00pm AEST
[email protected]om.au
AFTER SALES SUPPORT
1300 663 907
AUS
YEAR WARRANTY
1
INDOOR ANTENNA
MODEL: HE180247 PRODUCT CODE: 7350 04/2019
Repair and Refurbished Goods or
Parts Notice
/