FEATURES
Part No. Description Quantity
1 Top 1
2 Left Side 1
3 Right Side 1
4 Back 1
5 Bar 1
#10-24 x 0.375in Bolts 12
#10-24 x 0.625in Bolts 2
ASSEMBLY
1. Stand the Left Side (2) panel vertically on a at surface with
tray anges facing inward. There should be a single thread-
ed insert at the front bottom, and three inserts at the back.
2. Attach the Back (4) panel by installing three #10-24 x 0.375in
bolts¹ into the threaded inserts.
3. Stand up the Right Side (3) panel with the tray anges facing
inward, and single threaded insert at the front bottom. At-
tach to the Back (4) panel, using three #10-24 x 0.375in bolts.
4. Place the Top (1) on the tray rack with the anges facing
down. Secure with six #10-24 x 0.375in bolts.
5. Attach the Bar (5) to the bottom front using two #10-24 x
0.625in bolts.
6. Check for proper installation and alignment of components,
and tighten all fasteners.
¹All bolts are Whiz Lock
®
brand serrated flange fasteners.
TSA-156
TSA-156 Parts Diagram
1
2 34
5
Screen Tray Rack
TSA-156
OPERATING MANUAL
Rev: 02/2019
PHONE: 800-444-1508 P.O. Box 200, Lewis Center, Ohio 43035-0200
740-548-7298 E-mail: customerservice@gilsonco.com Product Web Page: www.globalgilson.com
FAX: 800-255-5314
740-548-5314
/