Page is loading ...
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark
Office. All other product or service names are the property of their respective
owners. The Bluetooth wordmark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Motorola, Inc. is under license. Other trademarks
and trade names are those of their respective owners.
© 2006 Motorola, Inc. All rights reserved. Printed in the U.S.A.
hellomoto.com
CFJN3080A – 06/2006
a
rk
i
ve
n
c.
r
ks
motorola
S805
Bluetooth
®
DJ Headphones
S805
CFJN3080A – 06/2006
1
Bluetooth-Enabled
Cell Phone
Phone
S805
Bluetooth-Enabled
Audio Device
1
2
3
4
5
6
7
8
Figure 1
Figure 2
3
English
General and safety information
European Union Directives Conformance Statement
Hereby, Motorola declares that this product (“S805”) is in compliance with:
• The essential requirements of European Union Directive
1999/5/EC
• All other relevant EU Directives
You can view your product's Declaration of Conformity (DoC) to Directive
1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte.
Caring for the Environment by Recycling
When you see this symbol on a Motorola product, do not dispose the
product with household waste.
Recycling Mobile Phones and Accessories
Do not dispose of mobile phones or electrical accessories, such as
chargers or headsets, with your household waste. In some countries or
regions, collection systems are set up to handle electrical and electronic
waste items. Contact your regional authorities for more details. If collection
systems aren’t available, return unwanted mobile phones or electrical
accessories to any Motorola Approved Service Centre in your region.
FCC Notice to Users
Users are not permitted to make changes or modify the device in any way.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
See-47-CFR-Sec.-15.21.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. See-47-CFR-Sec.-15.19(3).
4
English
Welcome
Welcome to the world of Motorola digital wireless communication! We
are pleased that you have chosen the Motorola S805 Bluetooth
®
DJ
headphones.
You can use your S805 DJ Headphones simultaneously with your Bluetooth
audio device and your Bluetooth phone.
See figure 1 on page 1.
Listen to music, hear a ring, and transfer to take the call on the headphones.
Hang up the call with a push of a button and your music automatically
continues playing.
Your S805 supports both Hands-free (HFP) and Headset Bluetooth profiles
for calls, and Advanced Audio Distribution (A2DP) and Audio Video Remote
Control (AVRCP) profiles for wireless, streaming music.
Before your begin
Take a moment to familiarize yourself with your S805 DJ headphones.
See figure 2 on page 1.
Music Controls – Right Pod
1 Track Control Wheel. Allows you to skip forward to the next music track,
or skip to the previous music track.
2 Play/Pause/Stop Button and Indicator Light 왘❙❙■ . Allows you to play,
pause, or stop music when listening to music over a Bluetooth
connection using A2DP and AVRCP profiles. For audio played back
through a wired (non-Bluetooth) connection, this button allows mute/un-
mute of incoming audio. In a call via Bluetooth (Hands-free profile), this
button allows mute/un-mute of the microphone.
3 Microphone. Used when playing or receiving calls.
5
English
Call Controls – Left Pod
4 Call Button and Indicator Light
Y
. Used to answer and end calls. Also
used to turn S805 on and off.
5 Volume Control Wheel. Allows you to increase or decrease for music or
calls.
6 Grommet. Flexible rubber flap used to cover headphones jack and
charging port.
7 Charging Port. When charging, one end of the charger should be
inserted into this port.
8 Headphones Jack. Allows you to connect to a non-Bluetooth music
source. When using such a device as a music source, plug in one end
of the included cable into the music source, and the other end into this
receptacle.
Initial Set up
Before you can use your headphones, you must:
1 Charge your headphones’ internal battery
2 Pair your headphones with your phone and/or audio source
Charging your headphones
See figure 3 on page 2.
Plug the Motorola charger into the end of the headphones. Both
Y
and 왘❙❙■
indicator lights turn on when the battery is charging. It may take up to 1
minute for the indicator lights to turn on.
When the headphones' battery is fully charged (about 3 hours), the
indicator lights turn off.
Note: Headphones are not functional while charging.
6
English
Pairing your headphones and phone
Your phone’s Bluetooth feature is off by default. Make sure the Bluetooth
feature is permanently turned on in your phone. Please check your phone’s
user’s guide.
Before you can use your headphones, you must pair (link) them with your
phone first.
1 With the headphones’ power off, press and hold the Call button for
6-10 seconds until the indicator light turns on and remain steadily lit.
If the indicator light is flashing or does not remain steadily lit, turn off the
headphones and repeat this step.
2 Perform a device discovery (or scan) from the phone. For details about
device discovery, consult your phone’s user’s guide. The phone lists
Bluetooth devices it finds.
3 Select Motorola S805 in the list of discovered devices and confirm by
following the on-screen prompts.
4 When prompted by the phone, enter the passkey 0000 and confirm.
When your headphones successfully pair with your phone, the
Y
indicator
light changes from steadily lit to rapidly flashing.
Pairing your headphones and audio device
To use your headphones for streaming audio, you must pair them with
your audio device.
1 Place your headset in pairing mode.
2 Place your Bluetooth audio device in pairing mode. See your Bluetooth
audio device’s user guide for details.
3 Place headphones and audio device close together while in pairing
mode.
When your headphones pair successfully with your audio device, the
Y
indicator light changes from steadily lit to rapidly flashing.
7
English
Test and use
Verify your headphones and audio device work together:
1 Place the headphones on your head.
2 Start playing music on the audio device.
If your headphones and audio device are successfully paired, you will
hear music on your headphones.
Verify your headphones and phone work together:
1 Place the headphones on your head.
2 Make a call from your phone.
If your headphones and phone are successfully paired, you will hear
ringing on your headphones.
Paired link to additional devices
Your headphones can store pairing information for up to 8 different devices
in chronological order. When an attempt to pair to more than 8 devices is
made, the oldest paired device is removed from the list.
The headphone will automatically initiate a connection with the last device
it was connected to either by powering up the headset or by pressing
the Call button. If you want to connect the headset to another device in
the paired device list, you must initiate the connection from that device.
Whichever of the 8 devices initiates a connection to the headset afterwards,
that device then becomes the “last connected” device.
8
English
Using your headphones
Turning your headphones on & off
To turn your S805 headphones on, press and hold
Y
button until the
indicator light flashes twice. Then, release the button.
To turn your S805 headphones off, press and hold
Y
button until the
indicator light flashes three times and then turns off.
When the Bluetooth connection is between the S805 and a phone using
Hands-free Profile (HFP) for call management, only the
Y
indicator light
is lit.
When the Bluetooth connection involves Advanced Audio Distribution
(A2DP) for streaming audio, both
Y
and 왘❙❙■ indicator lights are lit.
To disable the indicator lights, long press
Y
and 왘❙❙■ buttons at the same
time. To re-enable the indicator lights, also long press
Y
and 왘❙❙■ buttons
at the same time, turn the S805 off and on, or plug charger into the S805.
Playing music
Bluetooth (wireless) music source
Function Action
Play or Pause music Short press 왘❙❙■
Stop music
Long press 왘❙❙■
Adjust music volume control Turn Volume Control (on left pod) forward to
increase volume, or backward to decrease
volume
Skip back to previous song Turn Track Control wheel (on right pod) all the
way backward and release
Skip forward to next song Turn Track Control wheel (on right pod)all the
way forward and release
English
9
Non-Bluetooth (wired) music source
Function Action
Mute/un-mute music Short press
왘❙❙■
Making calls
Function Action
Receive a call Short press Y
End a call Short press Y
Reject a call Long press Y
Make a voice dial call Short press Y and speak the name
after the tone
Redial last call Long press Y
(Voice Dialing on)
Redial last call Short press Y to recall last number,
(Voice Dialing on) Short press Y again to dial last number
Answer a second incoming call Long press Y (places first call on hold)
Put active call on hold
Toggle between two active calls Long press Y (places active call on hold,
activates holding call)
Join a 3 way call Long press Y and
왘❙❙■ at the same time
(note: feature is phone/network
dependent)
Mute or un-mute a call Short press Y
Note: When placing or receiving calls, music playing from a Bluetooth-
enabled device is automatically paused. When the call is finished, the
music playing is resumed. Music playing from a non-Bluetooth music
source is muted when placing or receiving calls, and un-muted when the
call is finished.
Note: You can control the volume while in a call by rotating the Volume
Control Wheel on the left pod.
Indicator lights
The indicator light provides information about your headphones status.
With the charger plugged in:
Indicator Status
On (steady) Charge
Off Charging complete
With no charger plugged in:
Indicator Status
Off Power off
On (steady) Pairing mode
10 rapid flashes Pairing successful
Quick flash Standby (not on a call)
Slow pulse Connected (on a call)
Audio tones
The audio tones provide information about your headphones status.
Audio tone Status
Single high tone when turning volume Volume at minimum or maximum
control wheel
5 rapid high tones repeated Low battery
every 60 seconds
Note: while streaming music wirelessly, the low battery tone is played only once.
No audio indications: deteriorating quality Out of range
Ring tone Incoming call
Single high tone Pairing confirmation / End call
Single low tone Voice activation
2 tones Mute on/off
Series of ascending tones Power On
Series of descending tones Power Off
English
10
Troubleshooting
My phone does not find my headphones: make sure the indicator light on
your headphones is steadily lit when you phone is searching for devices.
My headphones worked before but now it is not working: Make sure the
Bluetooth feature is turned on in your phone. If the Bluetooth feature has
been turned off or was turned on temporarily, you may need to restart the
Bluetooth feature and pair your phone and headphones again.
If you have any additional questions, please call your hotline number (0870
9010 555) or visit us at www.hellomoto.com.
English
11
/