1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Serving Lines Hot Food Well w/Refrigerator or Freezer Base
model RAN HTD-4FX
Standard Features:
• Individual thermostatic control for precise food temperatures
• Die-stamped raised sanitary rim pan openings
• Interchangeable body panels
• Concealed locking mechanism with easy to use
spring-activated catch
• 1" drain, manifold, and ball valve
• Swivel casters - (2) locking
Standard Features for FX Insert:
• Convertible Refrigeration System (Refrigerator to Freezer)
• Point-of-use Size and Design
• Precise Temperature Control
• Patented In-drawer Cooling System
• Removable Insulated Drawer Compartment
• Ambient Drawer Track System
• Full-Extension Drawer System
• 100% Front Breathing
• Horizontal Gasket is Out of Harms Way
Options & Accessories:
Canopy
Overshelves
Trayslides
Corian Top
Granite Top
Laminates
Graphics
Sneeze Guards
Electrical Distribution System
Pan Racks for FX Unit
Drawer Divider for FX Unit
Description:
Portable, stainless steel heated serving station. Individually and
thermostatically controlled (4) 12" x 20" die-stamped hot food
wells with drains and gate valve. Interchangeable stainless steel,
or laminate body panels, snap together locking device designed
to work with all other RanServe equipment. Verify width if using
existing equipment. Provided with (4) swivel casters-(2) locking.
Only available in single phase.
Specifications:
UNIT TOP: Top to be one piece of die-formed 16 gauge stainless steel
with 1 1/2”, 90˚ nosing on all sides. (4) 12” x 20” top openings with
raised die-stamped perimeters.
FOOD WELLS: Unit fitted with complement of 12” x 12” x 6 1/2” electrically
heated food wells, individually and thermostatically controlled. 1” drains,
drain manifold and common ball valve installed as standard - drain lines
run to accessible area.
UNIT BODY: Body frame to be all welded construction of steel with
exposed corners to be 1 1/4” stainless steel. All corners welded and
polished. Body ends and panels to be plastic laminate with galvanized
steel backing (specify laminate color). Body ends and panels to be
removable to allow the changing of colors. Unit to be equipped with
4 swivel casters, (2) locking, that are recessed inside of toe area. Unit
shipped with 8’- cord & plug installed.
CONTROLS: Controls mounted on front of recessed stainless steel panel.
Connections to heating elements to be located outside of heated zone
to avoid wiring deterioration. Individual food wells wired to a common
junction box(es). 120, 208, or 240V operation.
Specifications for Refrigerator or Freezer Base:
REFRIGERATION SYSTEM: The FX Series uses a patented in-drawer
cooling system that directs 100% of the cooling inside the insulated and
removable drawer Insert. The evaporator coil is mounted horizontally
above the drawer Insert with an integral gasket that seals against the
insulated drawer compartment when closed. The refrigeration system
operates only when the drawer is closed, efficiently managing the air-
flow while reducing energy and humidity build-up. Press-fit removable
gasket with magnet-to-magnet seal is standard.
TEMPERATURE STATEMENT: The unit is provided with a electronic
temperature controller that can be easily adjusted by the operator to
any temperature setting between -5°F (freezer) operation up to 40°F
(refrigerator).
Randell Serving Lines, Page 1
PP SPECIAL01 Rev. A
Created 11/09
60"
9'CORD NEMA #5-50P
OF UNIT
TO 1" BELOW BOTTOM
DRAIN LINE EXTENDS
1/2" DIA COPPER
9'CORD NEMA #14-30P
22.3AMPS/4.4KW
240V/60Hz/1PH
9'CORD NEMA #14-30P
25.1AMPS/4.4KW
208V/60Hz/1PH
2.5"
DRAIN
2.5"
9' CORD & PLUG
40.7AMPS/4.4KW
120V/60Hz/1PH
LEGEND FOR
34"
PANEL
35"
J
HP
D
ABOVE FIXED FLOOR
J-BOX = 6" AFF
AFF =
CHECK ONE:
RAN HTD-4S
BUILT INTO BASE
115V/60Hz/1Ph/3.9A total
LEGEND FOR MODEL # FX-1A
2.5 Cu Ft STORAGE (PER DRAWER)
(1) 6.1cc COMPRESSOR
27.7"
25.7"
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of
Dover Corporation.
Models RAN HTD-4FX
Model L D H
# of
Wells
# of
Elements
120V 120/208V 120/240V
Ship Wt.
KW Amps NEMA KW Amps NEMA KW Amps NEMA
RAN HTD-4FX 60” 34” 35” 4 4 4.4 40.7 5-50P 4.4 25.1 14-30P 4.4 22.3 14-30P 460 lbs
If units have lights/heatlamps or any modifications reqiring additional power, KW, AMPS & NEMA configeration electrical.
60"
9'CORD NEMA #5-50P
OF UNIT
TO 1" BELOW BOTTOM
DRAIN LINE EXTENDS
1/2" DIA COPPER
9'CORD NEMA #14-30P
22.3AMPS/4.4KW
240V/60Hz/1PH
9'CORD NEMA #14-30P
25.1AMPS/4.4KW
208V/60Hz/1PH
2.5"
DRAIN
2.5"
9' CORD & PLUG
40.7AMPS/4.4KW
120V/60Hz/1PH
LEGEND FOR
34"
PANEL
35"
J
HP
D
ABOVE FIXED FLOOR
J-BOX = 6" AFF
AFF =
CHECK ONE:
RAN HTD-4S
BUILT INTO BASE
115V/60Hz/1Ph/3.9A total
LEGEND FOR MODEL # FX-1A
2.5 Cu Ft STORAGE (PER DRAWER)
(1) 6.1cc COMPRESSOR
27.7"
25.7"
-
1
-
2
