Rust-Oleum 258283 User manual

Type
User manual

This manual is also suitable for

TECHNICAL DATA COU-01
COUNTERTOP
TRANSFORMATIONS
Form: GDH-64
Rev.: 051815
1
.DESCRIPTION AND USES .
Countertop Transformations
is the simple process to re-
surface your worn or damaged laminate countertops with
an easy five step coating system. Countertop
Transformations is suitable for kitchen and bathroom, or
any other countertop in your home.
Countertop Transformations uses a system of a strong
adhesive base coat, decorative colored vinyl chips and a
two component clear top coat to create a highly durable
finish.
The Countertop Transformations kit includes both an
instructional DVD and printed instructions to aid with the
process and coating application. The kit also includes:
• Adhesive Base Coat
Wetting Agent
• Decorative Color Chips
• 2-Part Protective Top Coat (Part A & B)
• Diamond-Embedded Sanding Tool
• Sanding Block
• Decorative Chip Dispenser
• Decorative Chip Scraper
• Stir Sticks
Items not supplied with the kit which need to be purchased
separately:
• (1) 6" x 3/8" Nap Microfiber Roller and Frame
• (1) 6" High-Density Foam Roller and Frame
• 2 Paint Trays
• (2) 2" Synthetic Paint Brushes
• Smooth Painter’s Tape (2" size)
• Drop Cloth
• Plastic Sheeting
• Disposable Gloves
• Lint-Free Rags
• Dust Mask
• Protective Eyewear
Suggested Items Needed:
• 100% Silicone Kitchen and Bath Caulk (for repair)
Hand Brush and Dust Pan or Shop Vacuum with Brush
Attachment
• Putty Knife
PACKAGING .
Two kit sizes are available. The small kit covers 30 square
feet or 12 linear feet. The large kit covers 50 square feet
or 20 linear feet.
PRODUCTS .
COUNTERTOP TRANSFORMATIONS
Large Kit Description
258283 Java Stone
258284 Onyx
258285 Charcoal
258286 Desert Sand
Small Kit Description
258512 Charcoal
258514 Desert Sand
PRODUCT APPLICATION .
Watch the entire instructional DVD and use the printed
instructions for the complete, step by step, procedure on
application of the materials.
SURFACE PREPARATION
The surface of the countertop must be completely cleaned
and de-glossed in accordance to the instructions to ensure
proper performance of the Countertop Transformations.
APPLICATION OF BASE COAT
IMPORTANT: Once the Adhesive Base Coat is applied,
you have a 20-minute window to apply the Decorative
Color Chips before the Adhesive Base Coat dries. Follow
the printed instructions.
APPLICATION OF WETTING AGENT
The Wetting Agent keeps the Adhesive Base Coat wet
longer and improves the adhesion of the Decorative Color
Chips.
IMPORTANT: Only use Wetting Agent on Adhesive Base
Coat. Do not use with Protective Top Coat. Avoid getting
Wetting Agent on painted surfaces, appliances, cabinets
or countertops that have not been coated with Adhesive
Base Coat.
TECHNICAL DATA
COUNTERTOP TRANSFORMATIONS
Form: GDH-64
Rev.: 051815
2
PRODUCT APPLICATION (cont.) .
APPLICATION OF DECORATIVE CHIPS
Decorative Chips need to be dispersed quickly over the
entire surface of the countertop before the Adhesive Base
Coat dries. By the time you have finished, the entire
countertop, backsplash, and front edge should be
completely covered with Decorative Chips. Once the
Decorative Chips have been applied, DO NOT TOUCH
the countertop until the coated surface has dried overnight
(a minimum of 12 hours). After the countertop has dried
for a minimum of 12 hours, sand the surface smooth prior
to application of the topcoat.
APPLICATION OF THE TOPCOAT
The topcoat is a special two component clear modified
silicone epoxy finish. This protective finish is low odor and
does not require any special ventilation. Following
application, allow the Protective Top Coat to dry
undisturbed, taking steps to make sure the countertop is
not touched or brushed up against. Keep windows closed,
pets away, and ceiling fans off.
IMPORTANT: Contents of Protective Top Coat are
combustible until applied to the surface. Extinguish all
flames and pilot lights, and turn off stoves, heaters,
electric motors and other sources of ignition during use
until project is complete. Keep away from heat, sparks and
flame. Do not smoke.
Pour the contents of Part A Activator into the Part B Base
and thoroughly mix with astir stick for at least 2 minutes. It
is important to stir thoroughly for proper activation. Pour a
portion of the blended protective Top Coat into a clean
paint tray. Once mixed and activated, the working time is 4
hours.
Use a 2” synthetic paint brush to apply a heavy, even layer
of Protective Top coat to the backsplash. Be sure to cover
1-2” of the flat countertop surface that connects to the
backsplash. This will prevent the roller from accidently
bumping into the backsplash when rolling.
Use a 6” wide high density foam roller to apply the
Protective Top Coat over the flat countertop area and front
edge. Roll a heavy, even coat, from back to front, over the
entire countertop surface. Once complete, re-wet the roller
and re-roll a final pass of Protective Top Coat on the wet
surface of the countertop. Visually inspect the surface and
touch up light areas where needed.
Allow the Protective Top Coat to dry undisturbed, taking
steps to ensure the countertop is not touched or brushed
up against. Keep windows closed, pets away, and ceiling
fans off. The Protective Top Coat will be tack free in 4-6
hours.
The countertop is ready for light use in 48 hours and full
use after 7 days.
.
TECHNICAL DATA
COUNTERTOP TRANSFORMATIONS
Rust-Oleum Corporation Form: GDH-64
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 051815
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
BASE COAT
WETTING AGENT
TOP COAT
Resin Type
Acrylic
Surfactant
Modified silicone epoxy
Pigment Type
Various
NA
Clear
Solvents
Water
Water
n/a
Weight
Per Gallon
8.6-9.1 lbs.
8.4 lbs.
9.0 lbs.*
Per Liter
1.0-1.1 kg
1.0 kg
1.0 kg*
Solids
By Weight
33.5-36.0%
1.5%
98%*
By Volume
30.0-33.0%
1.0%
97%*
Volatile Organic Compounds
<250 g/l (2.08 lbs./gal.)
<250 g/l (2.08 lbs./gal.)
<250 g/l (2.08 lbs./gal.)*
Recommended Dry Film
(DFT) Per Coat
2.0-2.5 mils
(50-62.5µ)
NA
4.0-8.0 mils
(100-200µ)
Wet Film to Achieve DFT (unthinned
material)
6.0-7.5 mils
(150-187.5µ)
NA
4.0-8.0 mils
(100-200µ)
Practical Coverage at Recommended DFT
(assumes 15% material loss)
Small Kit 30 sq.ft.
Large Kit 50 sq.ft.
NA
Small Kit 30 sq.ft.
Large Kit 50 sq.ft.
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
NA
NA
NA
Recoat
NA
NA
4-8 hours
Full Hardness
NA
NA
7-10 days
Dry Heat Resistance
200°F (93°C)
NA
200°F (93°C)
Shelf Life
2 years
NA
2 years
Flash Point
>210°F (99°C)
NA
>160°F (67°C)
Safety Information
COMBUSTIBLE LIQUID AND VAPOR. HARMFUL IF INHALED. MAY AFFECT
BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR
NAUSEA. CAUSES RESPIRATORY TRACT, EYE AND SKIN IRRITATION. FOR
INDUSTRIAL OR COMMERCIAL USE ONLY. KEEP OUT OF REACH OF
CHILDREN.SEE THE PRODUCT MATERIAL SAFETY DATA SHEET (MSDS)
AND LABEL WARNINGS FOR ADDITIONAL SAFETY INFORMATION.
Safety Information
For additional information, see MSDS
* Activated material
  • Page 1 1
  • Page 2 2
  • Page 3 3

Rust-Oleum 258283 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI