Min. 2" (51 mm)
Clearance to Back Splash
Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
DSP-K-9993T-DST Rev. A
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for finish options and product availability.
8"
(203 mm)
Centers
6 13/16"
(173 mm)
6 13/16"
(173 mm)
2 1/8"
(55 mm)
Dia.
4 5/8"
(117 mm)
3 7/16"
(86 mm)
3 7/8"
(98 mm)
3 7/8"
(98 mm)
10 3/4"
(273 mm)
2 1/2"
(64 mm)
Max. Deck
Thickness
3/8" Compression Fitting
2 1/2"
(64 mm)
Max. Deck
Thickness
p Designate Proper Finish Suffix
Min. 2" (51 mm)
Clearance to Back Splash
3x 1 5/16" - 1 1/2"
(33-38 mm)
Hole Size
1 5/16" - 1 1/2"
(33-38 mm)
Hole Size
Optional 8"
Escutcheon
RP92233
4 5/8"
(117 mm)
3 7/16"
(86 mm)
9993T-p-DST
BAR/PREP FAUCETS
■ Pivotal
™
Collection
■ Single Handle Highrise Pull-Down
STANDARD SPECIFICATIONS:
•
Max flow rate: 1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa.
•
One or three hole mount (8" escutcheon optional,
not included).
•
Diamond coated ceramic cartridge.
•
3/8" O.D. straight, staggered PEX supply tubes.
•
Spout rotates 360°.
•
Red/Blue indicator markings.
•
Two-function wand; aerated stream or spray.
•
Dual integral check valves in sprayer.
•
LED indicator light signals on-off, water
temperature and when batteries run low.
55 E. 111th Street, Indianapolis, Indiana 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2017 Masco Corporation of Indiana
WARRANTY
•
Lifetime limited warranty on parts (other than
electronic parts and batteries) and finishes:
or, for commercial users, for 5 years from
date of purchase.
•
5 year limited warranty on electronic parts
(other than batteries); or, for commercial
users, for 1 year from the date of purchase.
No warranty is provided on batteries.
FEATURES:
• Touch
2
O
®
Technology
• DIAMOND Seal
®
Technology
• MagnaTite
®
Magnetic Docking
COMPLIES WITH:
•
ASME A112.18.1 / CSA B125.1
Indicates compliance to
ICC/ANSI A117.1
•
Verified compliant with .25% weighted
average Pb content regulations.
36 5/16"
(922 mm)
36 5/16"
(922 mm)
37 3/4"
(959 mm)
37 3/4"
(959 mm)
10 1/2"
(267 mm)
10 1/2"
(267 mm)
9 5/16"
(237 mm)
9 5/16"
(237 mm)
14 3/4"
(375 mm)
14 3/4"
(375 mm)
3/8" Compression Fitting
/