Ronbow Essentials 200532-BI Installation guide

Type
Installation guide
REV. 160727ronbow.comINSTALLATION GUIDE
INSTALLATION SHEETMODEL: 200520 200561
200532
200521
UNDERMOUNT RECTANGULAR SINK
MATERIALS NEEDED:
PHILLIPS SCREWDRIVER
ADHESIVE CAULKING
LEVELER
MATERIAL PROVIDED:
(4)UNDERMOUNT CLIPS
(4)SCREWS
(4)WINGNUTS
NOTE: DO NOT USE any adhesives with silicone. Silicone will bond to the decorative finish and cause permanent damage.
Check the Ronbow website for the sink cutout template.
STEP 1:
Apply adhesive caulking around the top side
of rim near the edge. Carefully place, align, and press
firmly.
See Figure 1.
STEP 2:
Locate the 4 metal inserts under the
countertop. Attach 4 undermount clips to secure
vessel.
See Figure 2.
STEP 3:
Secure top, and then backsplash to cabinet
by using adhesive caulking.
Figure 1.
Adhesive Caulking
Countertop
Backsplash
Figure 2.
Undermount
Clip
  • Page 1 1

Ronbow Essentials 200532-BI Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI