Page is loading ...
Quick User Guide
Gaming Case
Series
Table of Contents
Thank you for purchasing a Rosewill Computer Case.
Please read the instruction manual before using and
retain for future reference.
• Product Overview
Disassembly Chart ............................................. 01
Accessory Kit ...................................................... 02
• Installation Guide
1. Open the Unit ................................................ 03
2. Install the Power Supply ................................ 03
3. Install the Motherboard ................................. 04
4. Install the Add-On Card ................................. 04
5. Install 3.5”/2.5” HDD/SSD .............................. 05
6. Fan Installation
.............................................. 07
7. Care ................................................................ 08
8. Options .......................................................... 09
• Specications Table ........................................... 10
Front I/O Cable
Pinout ...................................... 11
Front I/O ............................................................ 11
Quick User Guide
1
CULLINAN MX Series
Gaming Case
Product Overview
Disassembly Chart (components vary by country)
Right Side Panel
Left Side Panel
Top Dust Filter
Front Dust Filter
Front Panel
Bracket
Bracket
Dimensions: 8.86" x19.00" x16.91" (W x H x D)
Front View Left Side View
8.86 inches
19 inches
16.91 inches
2
Gaming Case
Quick User Guide
CULLINAN MX Series
Accessory Kit
Image Part Name Qty Function/Component
Screw-A
#6-32 x 6 mm 5 PSU
Screw-B
#6-32 x 6 mm 12 Motherboard
Screw-C
#6-32 x 11 mm 4 3.5” HDD
Screw-D
M3 x 6.7 mm 20 2.5” SSD
Standoff 9+5
Motherboard
(9 pre-installed)
Thumb Screw 2 Tempered Glass Panel
Cable Tie 10 Cable Management
Quick User Guide
3
CULLINAN MX Series
Gaming Case
Installation Guide
1. Open the Unit
1-1. Remove the thumb screws and take off panel R and L (Figure 1).
2. Install the Power Supply
2-1. Seat the power supply unit (PSU) at the bottom-rear of the case and secure with Screw-A
(Figure 2).
2
1
4
Gaming Case
Quick User Guide
CULLINAN MX Series
3. Install the Motherboard
3-1. Secure the motherboard down onto the pre-installed standoff with Screw-B (Figure 3).
3
4. Install Add-On Card
4-1. Loosen the thumb screws to open the cover panel.
4-2. Unscrew to release the slot cover. Install the add-on card and secure with screws.
(Figure 4).
4
Quick User Guide
5
CULLINAN MX Series
Gaming Case
5-1. Take out the 3.5" HDD tray from the cage/unscrew to remove the 2.5" SSD tray from the
chassis.
5-2. Install the 3.5" drive onto the tool-less tray (secure with Screw-C if desired).
Secure the 2.5" drive onto the tray with Screw-D (Figures 5a/5b/5c).
5a
5. Install 3.5"/2.5" HDD/SSD
5b
5c
5-3. Put the 3.5" drive tray back into the HDD cage/screw down the 2.5" drive tray onto
the chassis (Figure 5d).
5d
6
Gaming Case
Quick User Guide
CULLINAN MX Series
Additional fan/drive installation on the side of PSU shroud:
5-4. Additional 3.5"/2.5" drives or 80 mm fans can be installed on the top/side of PSU shroud
(Figure 5e).
Additional fan/drive installation on the top of PSU shroud:
80 mm Fan 2.5" Drive
80 mm Fan
3.5" Drive
2.5" Drive
5e
Quick User Guide
7
CULLINAN MX Series
Gaming Case
6. Fan Installation
The Rosewill CULLINAN MX is equipped with a fan controller on the I/O ports to control
up to 7 fans with the fan hub (Figure 6). Follow the instructions below to correctly connect
the fan and controller to the fan hub.
a. Connect the Fan Hub:
Connect the 4 pin Molex connector to PSU.
b. Connect the Fans:
Connect the 3 pin connector to the Fan Hub.
The CULLINAN MX features fan speed control directly through the Front I/O Port:
"L" = Low: fans spin moderately without LED lights (Eco Mode).
"S" = Stop: fans stop spinning and LED lights turn off.
"H" = High: fans spin at full speed (1200 RPM) with LED lights on.
Fan Control
6
8
Gaming Case
Quick User Guide
CULLINAN MX Series
7. Care
To prevent damage, keep all panels closed and secured.
7-1. Put the side panels back in place and secure with thumb screws (Figure 7).
7-2. Clean the dust lters on top/bottom regularly to ensure adequate airow.
7
Quick User Guide
9
CULLINAN MX Series
Gaming Case
8. Options
8-1. Additional Fan Installation
The CULLINAN MX Series provides ample space for adding additional cooling fans.
Please refer to the Specications Table for options.
8-2. Liquid Cooling Radiator Installation
The CULLINAN MX
Series
supports the option of installing a max. 280 mm radiator on top
or a 360 mm radiator in the front to more effectively cool high-performance systems (Figure 8).
Instructions for installing water cooling radiator in the front:
a. Unscrew to remove the front panel on the left.
b. Unscrew to remove the 120 mm fans.
c. Secure the radiator with screws and put the front panel back.
Instructions for installing water cooling radiator on top:
a. Remove the top dust lter
.
b. Secure the radiator with screws and put the dust lter back.
8
10
Gaming Case
Quick User Guide
CULLINAN MX Series
Specifications Table
Model
Model Name CULLINAN MX Series
Specs
Type ATX Mid Tower
Color Black
Case Material Steel/Tempered Glass
With Power Supply
No
Power Supply Mounted Bottom
Motherboard Compatibility ATX, Micro ATX, Mini ITX
Side Panel Window Yes/Tempered Glass Side Window
Expansion
External 5.25" Drive Bays 0
Internal 3.5" Drive Bays 4/0
Internal 2.5" Drive Bays 5/9
Expansion Slots 8+2 Vertical Slots
I/O Ports
Front Ports
2 x USB 2.0
2 x USB 3.0
Audio In/Out
Fan Speed Control
Cooling System Options
120 mm Fans
3 x Front LED (pre-installed)
2 x Top (optional)
1 x Rear LED (pre-installed)
140 mm Fans
2 x Front (optional)
2 x Top (optional)
1 x Rear (optional)
80 mm Fans 5 x PSU Shroud (optional)
Physical Specs
Dimensions 8.86" x19.00" x16.91" (W x H x D)
Weight 20.28 lb
Quick User Guide
11
CULLINAN MX Series
Gaming Case
Front I/O
Power
Reset
USB 3.0
USB 2.0
Front I/O Cable Pinout
USB 3.0 Connector USB 2.0 Connector HD Audio Connector
Features
NOTICE: Please make sure your motherboard is equipped with on-board USB 3.0 socket before
purchasing.
• Tempered Glass Front & Side Panels
• I/O Ports: 2 x USB 2.0, 2 x USB 3.0, HD Audio, Fan Speed Control
• Pre-Installed 120 mm Fans: 3 x Front, 1 x Rear
• Supports up to 6 Fans
• Supports up to 180 mm Tall CPU Cooler
• Supports up to 420 mm Video Card
• Supports up to 360 mm Long Liquid Cooling Radiator (Top & Front)
• Top & Bottom Dust Filters
12
Gaming Case
Quick User Guide
CULLINAN MX Series
Memo
Technical Support Information
[email protected] 1-800-575-9885
----------------------------------------------------------------------------------
Thank you for purchasing a quality Rosewill product.
Please register your product at www.rosewill.com
for complete warranty information and support for your product.
CULLINAN MX Series_A
/
