ATHENA POWER RM-DD1U12A Quick Manual

Type
Quick Manual
5.25” Open Bay
5.25” Open Bay
ON/OFF Switch
Front USB 2.0
40mm Intake Fan
Fan Controller Card
Up to ATX M/B
1U, 1U Redundant or Flex ATX Power Supply
HDD Indicator
Power Indicator
ATHENA POWER
your best computer mate
RM-DD1U12A
Quick Guide
1210 JOHN REED CT., CITY OF INDUSTRY, CA 91745 | p: 626-810-5008 | f: 626-810-5555
WWW.ATHENAPOWER.COM
1U Rackmount Chassis / RM-DD1U12A
Full High Expansion Slot
a
a
a
a
a
a.
b.
c.
d.
d
b
b
b
b
stand offs for cable tie.
Mounting bracket for 5.25”
bay enclosure/ device.
(See figure 2.1)
Mounting bracket for 3.5”
HDD. (See figure 2.2)
Mounting bracket for 1U
power supply. (See figure
2.3)
All gures are located on the back of
this page
*
( Cable ties are included in the screw
package)
Run the wires
through the cable tie.
1.
Secure the cable tie
onto stand o with
screw.
2.
RM-DD1U12A
5.25” Device & 3.5” HDD Installation
1210 JOHN REED CT., CITY OF INDUSTRY, CA 91745 | p: 626-810-5008 | f: 626-810-5555
WWW.ATHENAPOWER.COM
1U Rackmount Chassis / RM-DD1U12A
ATHENA POWER
your best computer mate
1. Remove the brackets from the RM-DD1U12A chassis
2. Install the brackets onto the 5.25” device
3. Locate and secure the bracket back into the chassis with screws.
1.
Remove the brackets from the RM-DD1U12A chassis
2. Mount the 3.5” HDD onto the bracket
3. Locate and secure the bracket into the chassis with screws.
3.5”
5.25”
(gure 2.2)
(gure 2.1)
(gure 2.3)
Flex ATX PSU Bracket1U Redundant PSU Bracket1U PSU Bracket
1U PSU Bracket (220mm)
1U PSU Bracket (200mm)
1U PSU Bracket (190mm)
1U Redundant PSU Bracket
Interior Brackets Rear Panel Brackets
  • Page 1 1
  • Page 2 2

ATHENA POWER RM-DD1U12A Quick Manual

Type
Quick Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI