2:1(560$18$/
'(/8;(26&,//$7,1*3('(67$/)$1:,7+5(027(
,7(012 MG-MTSH011
a9+]:
CARE AND MAINTENANCE
CLEANING: CAUTION-Before cleaning the fan be
sure
to disconnect power cord from the plug.
Clean the grill surface with a clean damp cloth. Do
not use harsh chemical or abrasive cleaners. DO
NOT IMMERSE THE FAN OR ANY WIRES IN
WATER. ReWXUQ front grill before fan use. Allow fan
to dry completely before use. Periodic grill
cleaning with a vacuum FOHDQHUwill prevent dust
build up. The motor is sealed and does not
require any interior maintenance, cleaning or
lubrication.
MAINTENANCE: The Internal motor bearings are
permanently lubricated at the factory and do not
require any additional lubrication.
REPAIR: DO NOT OPERATE THE FAN WITHOUT
THE GRILL IN PLACE. DO NOT USE THE FAN IF
IT HAS MALFUNCTIONED OR BECOME
DAMAGED IN ANY WAY.
STORAGE: Keep original carton for storage of the
fan. Coil and tie the power cord to avoid damage
during storage.
FUSE REPLACEMENT:
Fig. #3Fig. #2Fig. #1
Slide Cover to Open
1. Grasp plug and remove from the receptacle or
other outlet device. Do not unplug by pulling on cord.
2. Open fuse cover. Slide open fuse access cover on
top of attachment plug towards blades. (see fig.1)
3. Remove fuse carefully. Remove the fuse by prying
it out carefully. (see fig.2)
4. Risk of fire. Replace fuse only with identical 2.5 or
5 Amp, 125 Volt fuse (3.6mm x 10mm).
5. Close fuse cover. Slide closed the fuse access
cover on top of attachment plug. (see fig.3).
6. Risk of fire. Do not replace attachment plug.
Contains a safety device (fuse) that should not be
removed. Discard product if the attachment plug is
damaged.
&86720(5$66,67$1&(
)25,00(',$7(&86720(56(59,&(&$//
$&86720(56(59,&(5(35(6(17$7,9(:,//$66,67<28:,7+$1<
48(67,2165(*$5',1*<285FANZZZPDJQDYR[FRP
0$*1$92;DQG60$579(5<60$57DUHUHJLVWHUHG
WUDGHPDUNVRI.RQLQNOLMNH3KLOLSV19DQGDUHXVHGXQGHU
OLFHQVHIURP.RQLQNOLMNH3KLOLSV19
0DGHLQ&KLQD
'LVWULEXWHGE\
2%2%DOWLPRUH0'