KTM 690 Duke 2019 Owner's manual

OWNER'S MANUAL 2019

690 Duke

Art. no. 3213923en

DEAR KTM CUSTOMER

*3213923en*

3213923en

08/2018

DEAR KTM CUSTOMER

Congratulations on your decision to purchase a KTM motorcycle. You are now the owner of a state-of-the-art

sports motorcycle that will give you enormous pleasure if you service and maintain it properly.

We hope you enjoy riding this motorcycle!

Enter the serial numbers of your vehicle below.

Vehicle identification number ( p. 24) Dealer's stamp

Engine number ( p. 25)

Key number ( p. 25)

The Owner's Manual contained the latest information for this model series at the time of going to print. However,

minor differences due to further developments in design cannot be ruled out completely.

All specifications are non-binding. KTM Sportmotorcycle GmbH specifically reserves the right to modify or delete

technical specifications, prices, colors, forms, materials, services, designs, equipment, etc., without prior notice

and without specifying reasons, to adapt these to local conditions, as well as to stop production of a particular

model without prior notice. KTM accepts no liability for delivery options, deviations from figures and descriptions,

misprints, and other errors. The models portrayed partly contain special equipment that does not belong to the

regular scope of supply.

DEAR KTM CUSTOMER

2

Reproduction, even in part, as well as copying of all kinds, is permitted only with the express written permission

of the copyright owner.

ISO 9001(12 100 6061)

KTM applies quality assurance processes that lead to the highest possible product quality as

defined in the ISO 9001 international quality management standard.

Issued by: TÜV Management Service

KTM Sportmotorcycle GmbH

Stallhofnerstraße 3

5230 Mattighofen, Austria

This document is valid for the following models:

690 Duke EU (F9703S4)

TABLE OF CONTENTS

3

TABLE OF CONTENTS

1 MEANS OF REPRESENTATION ...................... 8

1.1 Symbols used .................................... 8

1.2 Formats used..................................... 9

2 SAFETY ADVICE.......................................... 10

2.1 Use definition – intended use............ 10

2.2 Misuse............................................ 10

2.3 Safety advice................................... 10

2.4 Degrees of risk and symbols.............. 11

2.5 Tampering warning........................... 12

2.6 Safe operation ................................. 12

2.7 Protective clothing ........................... 13

2.8 Work rules....................................... 14

2.9 Environment.................................... 14

2.10 Owner's Manual ............................... 15

3 IMPORTANT NOTES.................................... 16

3.1 Manufacturer and implied warranty.... 16

3.2 Fuel, auxiliary substances ................. 16

3.3 Spare parts, accessories ................... 16

3.4 Service ........................................... 17

3.5 Figures ........................................... 17

3.6 Customer service.............................. 17

4 VIEW OF VEHICLE ...................................... 20

4.1 View of vehicle, front left (example) ... 20

4.2 View of vehicle, rear right

(example)........................................ 22

5 SERIAL NUMBERS ..................................... 24

5.1 Vehicle identification number............ 24

5.2 Type label ....................................... 24

5.3 Key number..................................... 25

5.4 Engine number ................................ 25

5.5 Fork part number ............................. 26

5.6 Shock absorber article number .......... 26

6 CONTROLS................................................. 27

6.1 Clutch lever..................................... 27

6.2 Hand brake lever.............................. 27

6.3 Throttle grip .................................... 28

6.4 Switches on the left side of the

handlebar........................................ 28

6.4.1 Combination switch...................... 28

6.4.2 Light switch ................................ 29

6.4.3 Menu switch................................ 30

6.4.4 Turn signal switch........................ 30

6.4.5 Horn button ................................ 31

TABLE OF CONTENTS

4

6.5 Switches on the right side of the

handlebar........................................ 32

6.5.1 Emergency OFF switch ................. 32

6.5.2 Electric starter button .................. 32

6.5.3 Ignition and steering lock ............. 33

6.6 Opening fuel tank filler cap............... 34

6.7 Closing the fuel tank filler cap........... 36

6.8 Seat lock......................................... 37

6.9 Tool set........................................... 37

6.10 Grab handles ................................... 38

6.11 Passenger foot pegs ......................... 38

6.12 Shift lever ....................................... 39

6.13 Foot brake lever ............................... 40

6.14 Side stand....................................... 40

7 COMBINATION INSTRUMENT ..................... 42

7.1 Combination instrument ................... 42

7.2 Indicator lamps................................ 43

7.3 Speed............................................. 45

7.4 Time............................................... 45

7.5 Temperature.................................... 46

7.6 Gear display .................................... 46

7.7 Fuel tank capacity............................ 47

7.8 Coolant temperature indicator ........... 47

7.9 "Favorites"....................................... 48

7.10 "Trip 1" ........................................... 48

7.11 "Trip 2" ........................................... 49

7.12 "General info" .................................. 50

7.13 "Set Favorites" ................................. 50

7.14 "Settings" ........................................ 51

7.15 "Warning" ........................................ 51

7.16 "TC/ABS"......................................... 52

7.17 "Shift Light" .................................... 53

7.18 Setting the time and date ................. 54

7.19 "Fuel Cons"...................................... 55

7.20 "Language" ...................................... 56

7.21 "Distance" ....................................... 56

7.22 "Temp"............................................ 57

7.23 "Extra functions" .............................. 57

7.24 Drive Mode (optional) ....................... 58

8 PREPARING FOR USE................................. 59

8.1 Advice on preparing for first use ........ 59

8.2 Running in the engine ...................... 61

8.3 Loading the vehicle.......................... 61

9 RIDING INSTRUCTIONS.............................. 64

9.1 Checks and maintenance measures

when preparing for use ..................... 64

9.2 Starting the vehicle.......................... 65

9.3 Starting off...................................... 66

9.4 Shifting, riding ................................ 67

TABLE OF CONTENTS

5

9.5 Engine traction torque

control (MSR)................................... 72

9.6 Applying the brakes.......................... 72

9.7 Stopping, parking............................. 75

9.8 Transporting.................................... 77

9.9 Refueling ........................................ 78

10 SERVICE SCHEDULE .................................. 81

10.1 Additional information...................... 81

10.2 Required work ................................. 81

10.3 Recommended work ......................... 84

11 TUNING THE CHASSIS ............................... 85

11.1 Adjusting the spring preload of the

shock absorber ............................. 85

11.2 Adjusting the footrests...................... 86

12 SERVICE WORK ON THE CHASSIS............... 89

12.1 Raising the motorcycle with the rear

lifting gear ...................................... 89

12.2 Removing the rear of the motorcycle

from the lifting gear ......................... 89

12.3 Lifting the motorcycle with the front

lifting gear ...................................... 90

12.4 Taking the motorcycle off the front

lifting gear ...................................... 91

12.5 Cleaning the dust boots of the fork

legs ............................................. 92

12.6 Removing the passenger seat ............ 94

12.7 Mounting the passenger seat............. 94

12.8 Checking the chain for dirt................ 95

12.9 Cleaning the chain ........................... 95

12.10 Checking the chain tension ............... 97

12.11 Adjusting the chain tension............... 99

12.12 Checking the chain, rear sprocket,

and engine sprocket ....................... 101

12.13 Adjusting the basic position of the

clutch lever ................................... 103

12.14 Checking/correcting the fluid level

of the hydraulic clutch.................... 104

13 BRAKE SYSTEM ....................................... 107

13.1 Anti-lock braking system (ABS) ....... 107

13.2 Adjusting the basic position of the

hand brake lever ............................ 110

13.3 Checking the brake discs ................ 110

13.4 Checking the front brake fluid

level ............................................. 112

13.5 Adding front brake fluid .............. 113

13.6 Checking the front brake linings ...... 116

13.7 Checking the free travel of foot

brake lever .................................... 117

TABLE OF CONTENTS

6

13.8 Adjusting the basic position of the

foot brake lever .......................... 118

13.9 Checking the rear brake fluid

level ............................................. 120

13.10 Adding rear brake fluid ............... 121

13.11 Checking the rear brake linings ....... 123

14 WHEELS, TIRES ....................................... 125

14.1 Removing the front wheel ............ 125

14.2 Installing the front wheel ............ 127

14.3 Removing the rear wheel ............. 130

14.4 Installing the rear wheel .............. 133

14.5 Checking the rear hub damping

rubber pieces ............................. 136

14.6 Checking the tire condition ............. 139

14.7 Checking tire pressure .................... 141

14.8 Using tire repair spray .................... 143

15 ELECTRICAL SYSTEM ............................... 144

15.1 Removing the 12-V battery .......... 144

15.2 Installing the 12-V battery ........... 147

15.3 Charging the 12-V battery ........... 149

15.4 Changing the main fuse.................. 152

15.5 Changing the ABS fuses ................. 154

15.6 Changing the fuses of individual

power consumers ........................... 156

15.7 Removing the headlight mask with

the headlight ................................. 160

15.8 Installing the headlight mask with

the headlight ................................. 161

15.9 Changing the headlight bulb ........... 162

15.10 Changing the position light lamp ..... 164

15.11 Changing the turn signal bulb ......... 165

15.12 Checking the headlight setting ........ 167

15.13 Adjusting the headlight range.......... 168

15.14 Diagnostics connector .................... 169

16 COOLING SYSTEM .................................... 170

16.1 Cooling system .............................. 170

16.2 Checking the antifreeze and

coolant level.................................. 171

16.3 Checking the coolant level in the

compensating tank......................... 173

16.4 Draining the coolant ................... 175

16.5 Filling/bleeding the cooling

system ...................................... 177

16.6 Changing the coolant...................... 179

17 TUNING THE ENGINE............................... 183

17.1 Checking the basic position of the

shift lever...................................... 183

TABLE OF CONTENTS

7

17.2 Adjusting the basic position of the

shift lever .................................. 184

17.3 Drive Mode (optional) ..................... 185

17.4 Traction control (optional) (TC)........ 186

18 SERVICE WORK ON THE ENGINE .............. 187

18.1 Checking the engine oil level........... 187

18.2 Changing the engine oil and oil

filter, cleaning the oil screens ...... 188

18.3 Adding engine oil........................... 194

19 CLEANING, CARE ..................................... 197

19.1 Cleaning the motorcycle ................. 197

19.2 Checks and maintenance steps for

winter operation............................. 200

20 STORAGE................................................. 202

20.1 Storage ......................................... 202

20.2 Preparing for use after storage......... 204

21 TROUBLESHOOTING ................................ 205

22 TECHNICAL DATA..................................... 209

22.1 Engine.......................................... 209

22.2 Engine tightening torques ............... 211

22.3 Capacities ..................................... 217

22.3.1 Engine oil ................................. 217

22.3.2 Coolant..................................... 217

22.3.3 Fuel ......................................... 217

22.4 Chassis ......................................... 218

22.5 Electrical system............................ 219

22.6 Tires............................................. 220

22.7 Fork.............................................. 221

22.8 Shock absorber.............................. 221

22.9 Chassis tightening torques .............. 222

23 SUBSTANCES .......................................... 228

24 AUXILIARY SUBSTANCES ......................... 231

25 STANDARDS ............................................ 233

26 INDEX OF SPECIAL TERMS ....................... 234

27 LIST OF ABBREVIATIONS.......................... 235

28 LIST OF SYMBOLS.................................... 236

28.1 Red symbols.................................. 236

28.2 Yellow and orange symbols.............. 236

28.3 Green and blue symbols.................. 237

INDEX ............................................................. 238

1 MEANS OF REPRESENTATION

8

1.1 Symbols used

The meaning of specific symbols is described below.

Indicates an expected reaction (e.g. of a work step or a function).

Indicates an unexpected reaction (e.g. of a work step or a function).

All work marked with this symbol requires specialist knowledge and technical understanding.

In the interest of your own safety, have these jobs performed by an authorized KTM workshop!

Your motorcycle will be optimally cared for there by specially trained experts using the auxiliary

tools required.

Indicates a page reference (more information is provided on the specified page).

Indicates information with more details or tips.

Indicates the result of a testing step.

MEANS OF REPRESENTATION 1

9

Indicates a voltage measurement.

Indicates a current measurement.

Indicates the end of an activity, including potential rework.

1.2 Formats used

The typographical formats used in this document are explained below.

Proprietary name Indicates a proprietary name.

Name

®

Indicates a protected name.

Brand™ Indicates a brand available on the open market.

Underlined terms Refer to technical details of the vehicle or indicate technical terms, which

are explained in the glossary.

2 SAFETY ADVICE

10

2.1 Use definition – intended use

This vehicle has been designed and built to withstand the normal stresses and strains of road use.

This vehicle is not suitable for use on race tracks or offroad.

Info

This vehicle is only authorized for operation on public roads in its homologated version.

2.2 Misuse

The vehicle must only be used as intended.

Dangers can arise for people, property and the environment through use not as intended.

Any use of the vehicle beyond the intended and defined use constitutes misuse.

Misuse also includes the use of operating and auxiliary fluids which do not meet the required specification for the

respective use.

2.3 Safety advice

A number of safety instructions need to be followed to operate the product described safely. Therefore read this

instruction and all further instructions included carefully. The safety instructions are highlighted in the text and

are referred to at the relevant passages.

SAFETY ADVICE 2

11

Info

Various information and warning labels are attached in prominent locations on the product described. Do

not remove any information or warning labels. If they are missing, you or others may not recognize dangers

and may therefore be injured.

2.4 Degrees of risk and symbols

Danger

Identifies a danger that will immediately and invariably lead to fatal or serious permanent injury if the

appropriate measures are not taken.

Warning

Identifies a danger that is likely to lead to fatal or serious injury if the appropriate measures are not

taken.

Note

Identifies a danger that will lead to considerable machine and material damage if the appropriate measures are

not taken.

Note

Indicates a danger that will lead to environmental damage if the appropriate measures are not taken.

2 SAFETY ADVICE

12

2.5 Tampering warning

Tampering with the noise control system is prohibited. Federal law prohibits the following acts or the causing

thereof:

1 The removal or rendering inoperative by any person other than for purposes of servicing, repair, or replace-

ment, of any device or element of design incorporated into any new vehicle for the purpose of noise control

prior to its sale or delivery to the ultimate purchaser or while it is in use, or

2 the use of the vehicle after such device or element of design has been removed or rendered inoperative by any

person.

Among those acts presumed to constitute tampering are the acts listed below:

1 Removal or puncturing of the main silencers, baffles, header pipes or any other components which conduct

exhaust gases.

2 Removal or puncturing of parts of the intake system.

3 Lack of proper maintenance.

4 Replacing moving parts of the vehicle, or parts of the exhaust system or intake system, with parts other than

those specified by the manufacturer.

2.6 Safe operation

Danger

Danger of accidents A rider who is not fit to ride poses a danger to him or herself and others.

– Do not operate the vehicle if you are not fit to ride due to alcohol, drugs or medication.

– Do not operate the vehicle if you are physically or mentally impaired.

SAFETY ADVICE 2

13

Danger

Danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and death.

– Always make sure there is sufficient ventilation when running the engine.

– Use effective exhaust extraction when starting or running the engine in an enclosed space.

Warning

Danger of burns Some vehicle components become very hot when the vehicle is operated.

– Do not touch any parts such as the exhaust system, radiator, engine, shock absorber, or brake system

before the vehicle parts have cooled down.

– Let the vehicle parts cool down before you perform any work on the vehicle.

Only operate the vehicle when it is in perfect technical condition, in accordance with its intended use, and in a

safe and environmentally compatible manner.

An appropriate driver's license is needed to ride the vehicle on public roads.

Have malfunctions that impair safety promptly eliminated by an authorized KTM workshop.

Adhere to the information and warning labels on the vehicle.

2.7 Protective clothing

Warning

Risk of injury Missing or poor protective clothing presents an increased safety risk.

– Wear appropriate protective clothing such as helmet, boots, gloves as well as trousers and a jacket

with protectors on all rides.

– Always wear protective clothing that is in good condition and meets the legal regulations.

2 SAFETY ADVICE

14

In the interest of your own safety, KTM recommends that you only operate the vehicle while wearing protective

clothing.

2.8 Work rules

Special tools are necessary for certain tasks. The tools are not a component of the vehicle, but can be ordered

using the number in parentheses. Example: bearing puller (15112017000)

During assembly, use new parts to replace parts which cannot be reused (e.g. self-locking screws and nuts, seals,

sealing rings, O-rings, pins, and lock washers).

In the case of certain screws, a screw adhesive (e.g. Loctite

®

) is required. Observe the manufacturer's instruc-

tions.

After disassembly, clean the parts that are to be reused and check them for damage and wear. Change damaged

or worn parts.

After completing a repair or service work, check the operating safety of the vehicle.

2.9 Environment

If you use your motorcycle responsibly, you can ensure that problems and conflicts do not occur. To protect the

future of the motorcycle sport, make sure that you use your motorcycle legally, display environmental conscious-

ness, and respect the rights of others.

When disposing of used oil, other operating and auxiliary fluids, and used components, comply with the laws and

regulations of the respective country.

Because motorcycles are not subject to the EU regulations governing the disposal of used vehicles, there are no

legal regulations that pertain to the disposal of an end-of-life motorcycle. Your authorized KTM dealer will be glad

to advise you.

SAFETY ADVICE 2

15

2.10 Owner's Manual

It is important that you read this Owner's Manual carefully and completely before making your first trip. The Own-

er's Manual contains useful information and many tips on how to operate, handle, and service your motorcycle.

Only then will you find out how to customize the vehicle ideally for your own use and how you can protect yourself

from injury.

Keep the Owner's Manual in an accessible place to enable you to refer to it as needed.

If you would like to know more about the vehicle or have questions on the material you read, please contact an

authorized KTM dealer.

The Owner's Manual is an important component of the vehicle and must be handed over to the new owner if the

vehicle is sold.

The Owner's Manual is also available for download from your authorized KTM dealer and on the KTM website.

International KTM Website: http://www.ktm.com

3 IMPORTANT NOTES

16

3.1 Manufacturer and implied warranty

The work specified in the service schedule may only be performed in an authorized KTM workshop and must be

recorded in both the Service & Warranty Booklet and in the KTM Dealer.net, otherwise any warranty coverage will

become void. Damage or secondary damage caused by tampering with and/or conversions on the vehicle is not

covered by the manufacturer warranty.

Additional information on the manufacturer or manufacturer warranty and the procedures involved can be found

in the Service & Warranty Booklet.

3.2 Fuel, auxiliary substances

Note

Environmental hazard Improper handling of fuel is a danger to the environment.

– Do not allow fuel to enter the groundwater, the soil, or the sewage system.

Use fuels and auxiliary substances in accordance with the Owner's Manual and specification.

3.3 Spare parts, accessories

For your own safety, only use spare parts and accessory products that are approved and/or recommended by KTM

and have them installed by an authorized KTM workshop. KTM accepts no liability for other products and any

resulting damage or loss.

Certain spare parts and accessory products are specified in parentheses in the descriptions. Your authorized KTM

dealer will be glad to advise you.

IMPORTANT NOTES 3

17

The current KTM PowerParts for your vehicle can be found on the KTM website.

International KTM Website: http://www.ktm.com

3.4 Service

A prerequisite for perfect operation and prevention of premature wear is that the service, care, and tuning work

on the engine and chassis is properly carried out as described in the Owner's Manual. Incorrect adjustment and

tuning of the engine and chassis can lead to damage and breakage of components.

Use of the vehicle under difficult conditions, such in rain, high heat or with a heavy load, can lead to consider-

ably more rapid wear of components such as the drive train, brake system, or suspension components. For this

reason, it may be necessary to inspect or replace parts before the next scheduled service.

It is imperative that you adhere to the stipulated run-in times and service intervals. If you observe these exactly,

you will ensure a much longer service life for your motorcycle.

3.5 Figures

The figures contained in the manual may depict special equipment.

In the interest of clarity, some components may be shown disassembled or may not be shown at all. It is not

always necessary to disassemble the component to perform the activity in question. Please follow the instructions

in the text.

3.6 Customer service

Your authorized KTM dealer will be happy to answer any questions you may have on your vehicle and KTM.

3 IMPORTANT NOTES

18

A list of authorized KTM dealers can be found on the KTM website.

International KTM Website: http://www.ktm.com

Page is loading ...

KTM 690 Duke 2019 Owner's manual

This manual is also suitable for

KTM 690 Duke 2019 Owner's manual

Related papers

Other documents