Page is loading ...
Start-up
To avoid distortion or mismatching which could damage the headphones
or the connected device, the product may only be connected to suitable
headphone outputs. Please refer to the connection data contained in the
“Technical data” section.
If your audio device does not have a suitable jack for connection of the
headphone, please use a suitable adapter.
• T
urn down the volume of the headset output completely at the device to be connected.
• Insert the phono jack of the phone cable included that is closer to the microphone
housing into the corresponding socket at the left ear cup of the headphones.
The ear cups are labelled with R and L on the inside.
• Insert the other phone jack of the phone cable into the headphones socket on your
device.
• Adjust the sound level, using the corresponding control on the audio device.
• Using the button on the microphone housing, you can:
- start/pause music playback
- answer calls (press briefly) or end calls (press long)
- activate voice control (if supported by the connected device)
Maintenance and cleaning
Use a clean, dry soft cloth to clean the headphones. If the device is very dirty, use a
cloth slightly moistened with lukewarm tap water.
Disposal
Electronic devices are recyclable and must not be disposed of in the house-
hold waste!
Please dispose of the product, when it is no longer of use, according to the
current statutory requirements.
Technical data
Connector ................................................. 3.5 mm phono jack
Frequency range ..................................... 20 - 20000 Hz
Sensitivity of headphones ..................... 105 ±3 dB/mW/1 kHz
Sensitivity of microphone ...................... 42 dB
Impedance ............................................... 32 Ω
Cable length ............................................. 1.2 m
Weight .......................................................310 g
Operating and storage conditions........ -20 °C to +60 °C; 20% to 95% relative humidity
(not condensing)
G
Operating instructions
HP-P266 Headphones
Item no.
Intended use
The product is used as a headset (a combination of headphone and microphone) and
is suitable for connection to smartphones, mobile phones, tablet computers or other
audio devices with a headphone jack.
Any use other than that described above will lead to damage to the product and will
expose you to additional risks, such as short-circuiting, fire, etc.
No part of the product may be modified or converted.
The safety instructions must be observed at all times.
This product complies with the applicable national and European requirements. All
names of companies and products are the trademarks of the respective owners. All
rights reserved.
Package contents
• Headphones
• 3.5 mm jack cable
• Operating instructions
Up-to-date operating instructions:
1. Open www.conrad.com/downloads in a browser or scan the
displayed QR code.
2. Select document type and language and enter the item num-
ber into the search field. After submitting the query you can
download displayed records.
Explanation of symbols
This symbol indicates specific risks associated with handling, operation or
use.
Safety instructions
First, read the complete operating instructions carefully, as they contain
important information about the proper operation.
Damages due to failure to follow these operating instructions will void the
warranty! We do not assume liability for resulting damage!
We do not assume any liability for personal injuries and material damages
caused by the improper use or non-compliance with the safety instruc-
tions! In such cases, the warranty will be null and void!
• For safety reasons, any unauthorised conversion and/or modification of
the product is not permitted.
• Extra care should be taken when using the device for the first time. There-
fore, please follow the operating instructions carefully.
• Do not expose the product to high temperatures, humidity, dripping or
spraying water, strong vibrations or heavy mechanical loads.
• If you have doubts about how the product should be operated, or about
safety or the connection of the product, consult an expert.
• Do not leave packaging materials unattended. It may become a dangerous
plaything for children.
• Also observe the safety and operating instructions of any other devices
that are connected to this product.
• Do not listen to excessively loud music for long periods of time. This may
damage your hearing.
1407919
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.
Page is loading ...
Page is loading ...
/