Luminox XL.8832.MI.F Owner's manual

GGM.L042 Ed. 10/19

7 6 1 1 3 8 2 4 7 7 1 0 1

ENG

|

2

“RECON” is the abbreviation for “RECONNAISSANCE” (meaning “recogni-

tion” in French) and a common term used by the military for an exploratory survey

through direct observation to determine the strength and types of enemy forces,

their disposition and intention, along with the lay of the land and weather condi-

tions. Examples of reconnaissance include patrolling by Special Forces or specia-

lized units, ships, submarines, manned/unmanned aircraft and satellites.

The Luminox RECON Series was designed in collaboration with Andrea

Micheli, a former Swiss Army Military Security NCO, an internationally recognized

law enforcement/military specialized journalist and shooting instructor in order to

meet the requests from professional military personnel for an analog watch that

can be also used as a simple but efficient ground navigation tool. All watches in

the RECON Series feature a second color countdown zone on the dial, a dive

timing unidirectional ratcheting bezel, highly scratch resistant sapphire crystal with

antireflective coatings, a walking speed scale (essentially a walking tachymeter!)

Luminox “RECON” Series

available with scales in either km/h or mph and of course the ALWAYS VISIBLE

self-powered illumination found in all Luminox watches. All watches are packaged

in a tactical MOLLE/PALS (a standard carry system used in the military that

means (“MOdular Lightweight Load-carrying Equipment”/“Pouch Attachment

Ladder System”) compatible sunglass case.

Point Man – “Leading the Challenge!” (Series 8820)

The Point Man is the “tip of the spear.” Their job is to safely conduct the patrol

to the designated target through hostile territory. They define the marching speed

of the team. Being on point requires great concentration, nerves of steel, and

the ability to make instantaneous decisions but at exactly the right time, because

acting too soon or too late can be the difference between life or death for the

entire recon team.

ENG

|

4

Navigation Specialist (NAV SPC) – “Target Oriented!”

(Series 8830)

The Navigation Specialist is the person responsible for keeping the patrol

on the designated route until the target is reached, keeping on track with the use

of a map, a compass, and GPS. They are a master in navigation – always ori-

ented to the target. If necessary they are able to change the route and still bring

the patrol safely to their destination on time, always bearing in mind that an error

in the route calculation could have disastrous consequences for the entire mission.

Team Leader - “Attitude to Command!“ (Series 8840)

The Team Leader coordinates, conducts and makes important decisions whenever

required. He is in charge of successfully accomplishing the mission. Leadership

qualities, such as determination, flexibility, a sense of calm, and the ability to

quickly analyze a situation and make the right decision at the right moment are

critical to being a RECON leader, and the key figure of a RECON team.

Watch Strap (Series 8830 & 8840)

All maps have a scale which indicates the relationship between a certain distance

on the map and the distance on the ground. The map scale is usually located in

the legend box of a map.In order to facilitate navigation with a map, watch strap

of the RECON Series 8830 and 8840 feature features three common map scales

which can be used to measure distances on maps without the need of calculations.

The map scales in bold on the straps are the following:

1:100.000 – 1 cm = 100.000 cm (1 Km) on the map

1:50.000 – 1 cm = 50.000 cm (500 m) on the map

1:25.000 – 1 cm = 25.000 cm (250 m) on the map

Military maps are usually in scale: 1:50.000 and 1:25.000

The watch strap also features an inch/cm measurement and comparison chart.

The NAV SPC Series 8830 comes with a small compass on to the strap.

Page is loading ...

ENG

|

8

“Whatever your target or mission may be: a Luminox RECON

Series watch is a great instrument to aid in exploring your

world.” Andrea Micheli

Luminox – Essential Gear.

Luminox RECON Series – Instructions

The Watch as a Sun Compass

In a survival situation it is possible to check your direction using an analog watch,

whenever you can see the sun. In the Northern Hemisphere: point the hour hand

of your watch dial at the sun. Bisect the angle between the hour hand and the 12

o‘clock mark to get the north-south line (substitute 1 o‘clock mark during Daylight

Saving Time). North will be the direction further from the sun. In the Southern

Hemisphere: point the 12 o’clock mark on your watch dial at the sun. Bisect the

angle between the hour hand and the 12 o‘clock mark to get the north-south line

(substitute 1 o‘clock mark during Daylight Saving Time). North will be the direction

further from the sun.

Walking Speed Scale

Using a RECON series watch, you can calculate the approximate average

walking/hiking speed in an hour. This calculation is based on a distance of 50

m /164 ft. As the average step length of a person varies as a function of their

height, it is recommended that you measure how many steps you personally

need to walk 50 m/164 ft, prior to beginning your calculation.

General Comment: One step is approximately 75 cm or 2 1/2 feet

Knowing how many steps you need to cover 50 m / 164 ft, start counting

your steps when the second hand is on 12 o’clock.

When you have covered the distance of 50 m / 164 ft, observe the Walking

Speed scale noting the position of the second hand to arrive at your walking

speed in one hour.

ENG

|

10

GMT Function

(NAV SPC Series 8830 only)

Setting the 2nd time zone-24-hour time display

(in stead of a.m./p.m. time display):

Pull out the crown (C) one stop to position1.

Rotate the crown counter-clockwise until the Indicator (i) shows the desired

time in the 2nd time zone on the 24 hour scale on the outer bezel.

Push in the crown (C) to its normal position.

24

For example: If you need 30 seconds to cover 50 m / 164 ft, your average

approximately walking speed is 6 km/h or 3.7 mph.

If you are walking/hiking in a group, the calculation should always be based on

the slowest walking person.

Disclaimer:

The walking speed scale is an approximate system to measure walking/hiking

speed. Conditions such as personal fitness, terrain, weather conditions and other

factors can drastically affect the walking/hiking speed of a person. The compass

is a basic orientation device and the presence of alternate magnetic fields could

affect accuracy. Luminox cannot be held responsible in any way for the use or

misuse of the walking scale and the compass device, or any and all liabilities

resulting from such use.

NOTE:

The GMT hand displays the second time zone in the 24 hour scale (military time) e.g. At 2:00 am the GMT

hand points to 2 and at 2:00 pm it points to 14 on the outer bezel.

Page is loading ...

ENG

|

14

World Time City Zones Bezel

(Team Leader Series 8840 only)

The city names of the world’s major cities are displayed on this bezel.

The combination of the city name on the bezel and the 24-hour marker tells

you the approximate time in each city.

Example: You are staying in Hong Kong and wish to know the time in Paris.

Suppose that the time in Hong Kong is currently 2:00pm.

1. Convert the current hour in Hong Kong to the 24-hour

format, 2:00 pm to 14:00.

2. Turn the bezel until the city name Hong Kong points to the

“14” on the 24-hour marker.

3. Determine the hour in Paris by reading the hour marker

corresponding to the city name Paris on the bezel.

NOTE:

Daylight Saving Time

is a system adopted by

some countries to make the

best use of daylight during

a certain period of summer.

Under this system the time

is advanced one hour. For

countries that use Daylight

Saving Time, the time may

be an hour different than

stated on the bezel (B).

B

Page is loading ...

Luminox XL.8832.MI.F Owner's manual

Luminox XL.8832.MI.F Owner's manual

in other languages

Related papers

Other documents