Boston CPS 10Wi User manual

CPS 10Wi
Boston
Brand
Boston
Model
CPS 10Wi
Category
Subwoofers
Type
User manual

This manual is also suitable for

OWNER’S MANUAL / SAFETY INSTRUCTIONS / COMPLIANCE INFORMATION
Classic
CPS 12Wi, CPS 10Wi, CPS 8Wi
Wireless-Ready Subwoofers
Español
Subwoofers Boston
Classic Series
Manual del Propietario /
Instrucciones de Seguridad /
Información de Cumplimiento
Français
Caissons de graves Boston
Classic Series / Guide de
l’utilisateur / Instructions
de sécurité / Informations
relatives à la conformité
3
Specifications CPS 12Wi CPS 10Wi CPS 8Wi
Frequency Range:
25Hz – 150Hz 28Hz – 150Hz 31Hz – 150Hz
Amplier Power: 400 watts RMS 300 watts RMS 200 watts RMS
(850 watts Peak) (650 watts Peak) (350 watts Peak)
Bass Driver: 12” (305mm) DCD 10” (254mm) DCD 8” (203mm) DCD
Dimensions: (H x W x D) 15
11
⁄16 x 16
7
⁄16 x 17” 13
7
⁄8 x 14
11
⁄16 x 17” 11
1
⁄2 x 12
3
⁄16 x 15
3
⁄8”
(397 x 416 x 431mm) (352 x 372 x 431mm) (292 x 309 x 389mm)
Weight: 48.5 lbs 40 lbs 26 lbs
(22kg) (16.8kg) (11.7kg)
Introduction
Boston Acoustics Classic Series Wireless-Ready Subwoofers
Thank you for choosing Boston Acoustics. The Classic Series Wireless Ready subwoofers incorporate high-quality components
that produce the legendary Boston Sound. The subwoofers are ideally suited for use in a high-quality 5.1 channel home
theater or stereo music system. They are capable of impressive deep bass and high output from remarkably compact
enclosures. In addition, they feature BassTrac®, a proprietary Boston-designed circuit that tracks the input signal to the
subwoofer and prevents its amplifier from being driven into audible distortion. The benefit: the bass stays clean and strong
at any listening level.
Features
• PlaywirelesslywiththeoptionalWT50WirelessTransmitter
• 12”,10”,and8”woofers
• 200to400wattsRMS
• High-outputfront-ring,front-porteddesign
• DeepChannel®Design(DCD)woofersformorebassfromlessamplierpower
• BassTraccircuitryfortight,distortion-freebassatalloutputlevels
• Adjustablecrossoverfrequencyandvolumecontrol
• Switchablepolarity
• Signal-sensingautomaticaudio-oncircuitry
• Speakerandlinelevelinputs
• Ultra-rigidreinforcedcabinetry
3
Specifications CPS 12Wi CPS 10Wi CPS 8Wi
Frequency Range: 25Hz – 150Hz 28Hz – 150Hz 31Hz – 150Hz
Amplier Power: 400 watts RMS 300 watts RMS 200 watts RMS
(850 watts Peak) (650 watts Peak) (350 watts Peak)
Bass Driver: 12” (305mm) DCD 10” (254mm) DCD 8” (203mm) DCD
Dimensions: (H x W x D) 15
11
⁄16 x 16
7
⁄16 x 17” 13
7
⁄8 x 14
11
⁄16 x 17” 11
1
⁄2 x 12
3
⁄16 x 15
3
⁄8”
(397 x 416 x 431mm) (352 x 372 x 431mm) (292 x 309 x 389mm)
Weight: 48.5 lbs 40 lbs 26 lbs
(22kg) (16.8kg) (11.7kg)
Introduction
Boston Acoustics Classic Series Wireless-Ready Subwoofers
Thank you for choosing Boston Acoustics. The Classic Series Wireless Ready subwoofers incorporate high-quality components
that produce the legendary Boston Sound. The subwoofers are ideally suited for use in a high-quality 5.1 channel home
theater or stereo music system. They are capable of impressive deep bass and high output from remarkably compact
enclosures. In addition, they feature BassTrac®, a proprietary Boston-designed circuit that tracks the input signal to the
subwoofer and prevents its amplifier from being driven into audible distortion. The benefit: the bass stays clean and strong
at any listening level.
Features
• PlaywirelesslywiththeoptionalWT50WirelessTransmitter
• 12”,10”,and8”woofers
• 200to400wattsRMS
• High-outputfront-ring,front-porteddesign
• DeepChannel®Design(DCD)woofersformorebassfromlessamplierpower
• BassTraccircuitryfortight,distortion-freebassatalloutputlevels
• Adjustablecrossoverfrequencyandvolumecontrol
• Switchablepolarity
• Signal-sensingautomaticaudio-oncircuitry
• Speakerandlinelevelinputs
• Ultra-rigidreinforcedcabinetry
5
receiver
CPS 12Wi
use either input
digital receiver
Sub Out
CPS 12Wi
Connections
After your speakers are properly placed, you are ready to wire your system.
NOTE: Power is always supplied to the subwoofer electronics unless it is unplugged or switched to the Mute position using
the Audio On switch located on the rear panel. The auto-on circuitry only activates or deactivates the power amplifier. Make
sure your subwoofer and receiver are unplugged when making the connection (230v models include a main power switch
which turns off all power of the subwoofer).
Power: When plugging your subwoofer in be sure to use a wall outlet, or dedicated electrical outlet. Some receivers will
provide a switched outlet. Do not use this. These on-board electrical outlets do not offer the amount of current or proper
isolation required by a power amplifier, such as the one in your subwoofer.
Line level or LFE: On most systems use the line level input or the LFE input. These inputs accept the line-level signal from
your receiver’s subwoofer output. Your receiver’s manual should indicate which input is most appropriate.
Connecting the Subwoofer to Digital Home Theater Systems Using LFE
Digital 5.1, 6.1 and 7.1 home theater electronics dedicate one channel (the “.1”) to reproduce the special low-frequency effects
(LFE) information (such as explosions and thunder) contained in digitally-encoded soundtracks.
Select ”subwoofer-yes” from your receiver’s set-up menu. Hooked up this way, the receiver’s amplifier is relieved of having
to reproduce the difficult low bass signals that can drive the receiver into audible distortion. In some cases it can also depend
on several other settings within a receiver. We recommend consulting your receiver manual for further assistance in this area.
Use an RCA cable (not included), as shown, to connect your digital receiver’s LFE/subwoofer output to the subwoofer.
Connect the other end to the Line Level/LFE input.
Connecting the Subwoofer to Stereo or Dolby® Pro Logic®
For stereo or Dolby Pro Logic systems use the “sub out” connection from your receiver to the input on the subwoofer marked
“L” or “R”.
6
Note
Certain receivers use speaker grounding circuits that may be incompatible with external powered audio products, such as pow-
ered subwoofers. When speaker wire is used instead of line level cables, this incompatibility can result in an audible hum when
the receiver is turned off or switched to a different speaker channel.
If this should happen with your Boston Acoustics subwoofer, you will need to make a ground cable and connect it to either RCA
line input on the subwoofer and any unused
RCA line input or output on your receiver
(see diagram). The proper ground cable for
this application should consist of two male
RCA plugs that have their negative outside
terminals (or “sleeve”) connected to each
other by any length of single conductor
copper cable. The inside positive (or “pin”)
terminals should not be wired in either plug.
CPS 12Wi
Connecting to Electronics Without a Subwoofer Output
If the receiver in your system does not have a subwoofer or LFE output you can connect the CPS Wi subwoofer to a preamp
output. Use a stereo RCA cable (not included) to connect the preamp outputs to the “L” and “R” Line Level inputs.
Adjusting the Crossover Control
When using the Line Level inputs (not the LFE input) the subwoofer’s built-in crossover is engaged. As a starting point, set the
crossover control on the subwoofer about 10Hz higher than the lower limit of your main speakers’ bass response. Fine-tune
the crossover setting by ear for the smoothest blend with your main speakers. The best setting of the crossover control will
depend on speaker placement and personal preference.
Speaker level
Use these high-level terminals with receivers that do not have subwoofer output. The speaker inputs accept both left and
right channel speaker signals from your receiver. When using a home theater receiver, set the speaker type to “Large.” The large
setting will produce a fuller sound.
or
CPS 12Wi
AUDIO
AUDIO VIDEO
VIDEOS VIDEO
V-AUX
IN
VCR
OUT
D-TV
/CBL
DVD
S VIDEO
VIDEO
MONITOR OUT
MONITOR
OUT
D-TV
/CBL
DVD
CD
FM
ANT
IN
(PLAY)
MD
/CD-R
OUT
(REC)
75Ω UNBAL.
TUNER
COMPONENT VIDEO
DIGITAL
OUTPUT
DIGITAL
INPUT
6 CH INPUT
CD
COAXIAL
R
L
R
L
MAIN
SUB
WOOFER
DVD
MD/CD-R
MD/CD-R
OPTICAL
OPTICAL
D-TV/CBL
Y
P
B
/C
B
PR/CR
SURROUND
CENTER
AM
ANT
GND
single conductor (-) RCA to (-) RCA ground cable
use any available RCA jackback of receiver
use either RCA jack
back of subwoofer
7
Optional WT 50 Wireless Transmitter
Transmitter Power
Plug the transmitter power supply into a power outlet. The transmitter power supply requires very little power so you can
plug it into an auxiliary power outlet on the receiver. Plug the connector on the power supply cable into the transmitter
power input labeled 5V DC.
Wireless ID Switches
Both the CPS Wi Subwoofer and optional WT 50 Wireless
Transmitter have Wireless ID switches (located on the rear
of the subwoofer and transmitter). The various switch
settings change the digital identification code of the
wireless signal the WT 50 sends to the subwoofer. The two
switches must be set to the same position. Typically you’ll
never need to adjust these switches. They are included in
case you have more than one CPS Wi subwoofer in your
house. Use different Wireless ID switch settings so the
subwoofers won’t interfere with each other.
Note: Do not connect the same audio source to the subwoofer and WT 50 wireless transmitter at
the same time.
Operation
Audio On/Auto/Mute
Plug the subwoofer’s AC cord into a wall outlet. Do not use the outlets on the back of the receiver. Set the audio switch
to the desired setting.
AUDIO ON – The subwoofer audio is always on.
AUTO – The subwoofer audio will turn on whenever a signal is detected. If no signal is detected after several minutes, it will
automatically enter the Mute mode.
MUTE – The subwoofer is muted and will not produce any sound. You may want to unplug your subwoofer if you will not be
using it for some time or wish to conserve electricity. (On 230v models only, you may turn off the main power switch, located
next to the power cord)
An LED indicator next to the Polarity switch indicates what mode the subwoofer is in:
OFF – The subwoofer is unplugged (or the main power switch is off on 230v models)
RED – Mute (No signal detected, Amp Off)
GREEN – Audio On (Signal detected, Amp On)
The subwoofer will automatically enter the Mute mode after several minutes when no signal is detected from your system.
The subwoofer audio will then turn ON instantly when a signal is detected.
Polarity Control
(0° or 180°): Selects regular (0°) or inverted (180°) phase for the subwoofer. Set this switch to provide the fullest, most
dynamic bass. The effect of phase will be most audible on low-frequency percussion instruments or music with a continuously
repeating bass line.
Crossover Control
Adjusts the frequency of the low pass filter for the subwoofer. Note: This control is not active when using the LFE input jack.
Volume Control
Turn the subwoofer Volume control to the 11 o’clock position. If no sound emanates from the subwoofer, check the AC-line
cord, Audio On switch, Power switch (on 230v models), and input cables.
Adjust the subwoofer Volume control until you hear a match between the main speaker and subwoofer. Bass response should
not overpower the room but rather be adjusted so there is a natural blend across the entire musical range.
WT 50 Transmitter Receiver
Power supply cord
CPS12Wi Service Parts
Component Item Component Description
110-002215 WOOFER 12"
111-001728 TRIM RING WOOFER CPS12Wi
120-003408 GRILLE ASSEMBLY CPS12Wi
120-003409 AMP ASSY W/O XFMR CPS12Wi 120V
120-003413 AMP ASSY W/O XFMR CPS12Wi 230V
120-003350
DISPLAY CARTON W/LABEL CPS12Wi BLK
120-003351
DISPLAY CARTON W/LABEL CPS12Wi CHERRY
126-000115 XFMR ASSEMBLY CPS12Wi 120V
126-000158 XFMR ASSEMBLY CPS12Wi 230V
132-000160
FUSE 5.0A 250V 20MM TIME LAG (for 120V model)
132-000161
FUSE 2.5A 250V 20MM TIME LAG (for 230V model)
137-001591 FOOT CPS10
137-001634 DETACHABLE POWER CORD 120V
137-001635 DETACHABLE POWER CORD 230V
140-000618 SCREW,HEX CAP,WFR
140-000619 SCREW,PHILIPS,AMP
141-002808 EPS TOP&BOTTOM SET CPS10/12Wi
142-003789
MANUAL CPS 8Wi 10Wi 12Wi
154-000308 TERMINAL CRIMP INSULATED CLOSED-END
PDF 檔案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.fineprint.com
PDF 檔案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.fineprint.com
1
1
2
2
3
3
4
4
DD
CC
BB
AA
Title
NumberRevisionSize
A4
Date:2009/9/16Sheet of
File:D:\My File\..\Main.SchDocDrawn By:
Pre\Main
BN20090031.1
11
Mike
WI_A
WI_RTN
WI_B WO_A
WO_B
U_Buffer_WI
Buffer_WI.SchDoc
P201
JK201A
313G-05
JK201B
313G-05
JK203B
JK203D
JK203A
JK203C
Normal
LFE
Out
U_SUM_total
SUM_total.SchDoc
P202
+15V
-15V
IN2
IN1
Out
U_Auto
Auto.SchDoc
R310
1K5/1206
G
R
D216
BK201
FGFG
C279
CD104
IN
Out
VcD+
VcD-
Limiter_S
U_Output
Output.SchDoc
LLin
LRin
WI_normal
HRin+
HLin+
HLin-
HRin-
Out
Auto_S1
Limiter_S1
U_SUM_RL
SUM_RL.SchDoc
LFEin
WI_LFE Out
Auto_S2
Limiter_S2
U_SUM_LFE
SUM_LFE.SchDoc
PDF 檔案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.fineprint.com
1
1
2
2
3
3
4
4
DD
CC
BB
AA
Title
NumberRevisionSize
A4
Date:2009/9/16Sheet of
File:D:\My File\..\Buffer_WI.SchDocDrawn By:
Pre\Main\Buffer_WI
BN20090031.1
22
Mike
U201B
4558M
R201
10K0
R202
20K0
C201
470p
R203
10K0
C202
470p
R204
20K0
WI_A
R207
10K0
R208
20K0
WI_RTN
U201A
4558M
C204
470p
R205
10K0
WI_B
R206
20K0
C203
470p
C205
10u/50V
C206
10u/50V
U201C
4558M
C207
CD104
C208
100u/16V
C209
CD104
C210
100u/16V
+15V
-15V
WO_A
WO_B
R209
100
R210
100
PDF 檔案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.fineprint.com
1
1
2
2
3
3
4
4
DD
CC
BB
AA
Title
NumberRevisionSize
A4
Date:2009/9/16Sheet of
File:D:\My File\..\SUM_RL.SchDocDrawn By:
Pre\Main\SUM_RL
BN20090031.1
33
Mike
U202D
2060M
R217
10K
C215
470p
D202
NI
D201
NI
R214
20K
R212
20K
C212
10u/50V
C214
10u/50V
R211
150
R213
150
C213
220p
C211
220p
LLin
LRin
R215
20K
WI_normal
U202A
2060M
R227
4K75
C220
220p
D203
NI
D204
NI
D206
NI
+15V
-15V
R226
4K75
C218
220p
D205
NI
R218
90K9
R222
90K9
R219
90K9
C217
10u/50V
C219
10u/50V
R223
90K9
HRin+
HLin+
HLin-
HRin-
R220
1K0/1W
R221
1K0/1W
R224
1K0/1W
R225
1K0/1W
C216
100u/50V
C221
10u/50V
R228
10K
R216
47R
R234
16K9
U202C
2060M
C225
MSC683
C226
MSC333
U202B
2060M
C222
10u/50V
Out
Auto_S1
C227
CD104
C228
100u/16V
C229
CD104
C230
100u/16V
+15V
-15V
R235
100
R236
100
U202E
2060M
R229A
A10K
R230
15K0
C223
470p
R231
18K
C224
47u/16V
R232
1K
R233
16K9
Limiter_S1
V1.0 Changes :
(1) Cancel MD201
PDF 檔案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.fineprint.com
1
1
2
2
3
3
4
4
DD
CC
BB
AA
Title
NumberRevisionSize
A4
Date:2009/9/16Sheet of
File:D:\My File\..\SUM_LFE.SchDocDrawn By:
Pre\Main\SUM_LFE
BN20090031.1
44
Mike
R252
10K
C238
470p
D210
NI
D209
NI
R249
10K
R250
20K
C237
10u/50V
R248
150
C236
220p
C234
10u/50V
R229B
A10K
R253
15K0
C240
470p
R254
18K
C239
47u/16V
R255
1K
LFEin
WI_LFE
U204A
4558M
U204B
4558M
U204C
4558M
C242
CD104
C243
100u/16V
C244
CD104
C245
100u/16V
+15V
-15V
R256
100
R257
100
C241
10u/50V
Out
Auto_S2
R251
47R
Limiter_S2
V1.0 Changes :
(1) Cancel MD202
PDF 檔案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.fineprint.com
1
1
2
2
3
3
4
4
DD
CC
BB
AA
Title
NumberRevisionSize
A4
Date:2009/9/16Sheet of
File:D:\My File\..\SUM_total.SchDocDrawn By:
Pre\Main\SUM_total
BN20090031.1
55
Mike
R269
16K9
R270A
B50K
R270B
B50K
R273
16K9
R271
NI
R272
NI
C251
MSC683
C252
MSC333
U206A
4558M
Normal
R274
10K
LFE
U206B
4558M
R276
10K
C254
470p
C253
10u/50V
R275
10K
U206C
4558M
C255
CD104
C256
CD104
+15V
-15V
Out
PDF 檔案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.fineprint.com
1
1
2
2
3
3
4
4
DD
CC
BB
AA
Title
NumberRevisionSize
A4
Date:2009/9/16Sheet of
File:D:\My File\..\CPS-12WI-Output.SchDocDrawn By:
Pre\Main\Output
BN20090031.1
66
Mike
U207A
2060M
C257
MSC474
C258
MSC474
R277
3K48
R278
54K9
IN
R279
6K65
U207D
2060M
R280
0R0
C259
NI
R281
0R0
R282
NI
C260
MSC154
C261
MSC154
Q201
C1815
R283
33K2
R284
11K
+15V
-15V
R285
10K
C262
22u/16V
U207C
2060M
R288
4K75
R287
4K75
R286
10K
SW201
TOGGLE
C263
NI
R289
4K75
C264
10u/50V
R291
8K66
C265
MSC154
C266
MSC683
U207B
2060M Out
R290
4K64
C267
10u/50V
R292
47K
C268
CD104
C269
CD104
+15V
-15V
U207E
2060M
IN
GND
-V
LSin
Out
+V
VccD-
VccD+
MD203
Limiter_BN
+15V -15V
VcD+
VcD-
R237
0R0
R238
NI
Limiter_S
PDF 檔案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.fineprint.com
1
1
2
2
3
3
4
4
DD
CC
BB
AA
Title
NumberRevisionSize
A4
Date:2009/9/16Sheet of
File:D:\My File\..\Limiter_BN.SchDocDrawn By:
Limiter
BN20090010.1
11
Mike
U03A
4558M
IN_LIM
R83
100K
C32
22u/16V
R72
9K53
R71
499
U02A
2060M
C33
NI
R73
10K
Q7
J111
R75
1K
R74
9K09
D23
1N4148
D24
1N4148
R80
4K99
R79
78K7
R82
4K99
R81
78K7
U02B
2060M
C34
CD103
R76
10K
VccD+
VccD-
Out_LIM
R70
1K
D25
1N4148
R68
100K
C31
100u/35V
R66
3K01
R69
300K
D22
1N4148
U02C
2060M
U02D
2060M
R61
120K
VccD+
R62
11K8
R64
11K8
R63
120K
VccD-
D21
1N4148
R65
NI
LSIN
P11
IN_LIM
Out_LIM
-15V
LSIN
+15V
VccD-
VccD+
U03C
4558M U02E
2060M
C40
CD104
C41
CD104
C38
CD104
C39
CD104
-15V
+15V
-15V
U03B
4558M
C42
10u/25V
PDF 檔案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.fineprint.com
1
1
2
2
3
3
4
4
DD
CC
BB
AA
Title
NumberRevisionSize
A4
Date:2009/9/16Sheet of
File:D:\My File\..\Auto.SchDocDrawn By:
Pre\Main\Auto
BN20090031.1
77
Mike
U208A
4558M
R294
47K
C270
1u/50V
R293
47K
IN2
IN1
C271
47p
R295
47K
R296
150K
C272
220p
D213
ZD3V3
R297
150
C273
10u/50V
D214
1N4148
R298
2K2
R299
22K
Q202
2N3904
R300
4K7
R301
10K
Q203
2N3906
R302
100
C274
100u/16V
R303
1M
SW202
TOGGLE
R304
10K
U208B
4558M
R306
1M
R305
1K
D215
1N4148
R307
12K
Out
U208C
4558M
C275
CD104
C276
100u/16V
C277
CD104
C278
100u/16V
+15V
-15V
R308
47R
R309
47R
PDF 檔案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.fineprint.com
PDF 檔案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.fineprint.com
PDF 檔案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.fineprint.com
PDF 檔案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.fineprint.com
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43

Boston CPS 10Wi User manual

CPS 10Wi
Boston
Brand
Boston
Model
CPS 10Wi
Category
Subwoofers
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents