Rockford Fosgate PUNCH 100 DSM User manual

Brand
Rockford Fosgate
Model
PUNCH 100 DSM
Type
User manual

This manual is also suitable for

Rockford Fosgate PUNCH 100 DSM

The Rockford Fosgate PUNCH 100 DSM is a powerful and versatile two-channel power amplifier that is perfect for powering your car's audio system. With 100 watts RMS of power per channel into 4 ohms, the PUNCH 100 DSM can easily drive even the most demanding speakers.

The PUNCH 100 DSM is also very efficient, thanks to its Class A/B design. This means that it will produce less heat than other amplifiers, which can lead to longer life and better sound quality.

The PUNCH 100 DSM is also very easy to use. It features a simple and intuitive control panel, making it easy to adjust the gain and crossover settings. The amplifier also includes a built-in clipping indicator, which helps you to avoid damaging your speakers.

Rockford Fosgate PUNCH 100 DSM

The Rockford Fosgate PUNCH 100 DSM is a powerful and versatile two-channel power amplifier that is perfect for powering your car's audio system. With 100 watts RMS of power per channel into 4 ohms, the PUNCH 100 DSM can easily drive even the most demanding speakers.

The PUNCH 100 DSM is also very efficient, thanks to its Class A/B design. This means that it will produce less heat than other amplifiers, which can lead to longer life and better sound quality.

The PUNCH 100 DSM is also very easy to use. It features a simple and intuitive control panel, making it easy to adjust the gain and crossover settings. The amplifier also includes a built-in clipping indicator, which helps you to avoid damaging your speakers.

THE
ALL
NEW
PUNCH
AMPLIFIERS!
The new Punch Amplifiers have emerged as the new reference far car
audio amplifiers. Making that claim is pretty bold because it means that we are
confident that the new Punch amplifiers are more powerful, more reliable, better
sounding, and more radical looking than any others. They are, and we’re sure of
it. You expect the best from Rockford Fosgate.
BETTER SOUND! MORE POWER!
Now with highly refined circuitry, the new Punch DSM amplifiers are
better sounding and more powerful than ever before. Discrete Surface Mount
(DSM) technology allows the packaging of complex circuitry in small areas
resulting in a higher quality amplifier with lower noise and distortion. The Punch
DSM amplifiers utilize all N-channel V-FET circuitry for higher power output and
less distortion. To protect your Punch DSM amplifier, computerized Real Time
Protection circuits sense when output reaches an unsafe level and will reduce it.
Rockford
didn’t stop there with performance improvements to the new
Punch amplifiers. The new Punch have upgruded MOSFET, Pulse Width
Modulated power supplies that are more responsive to the music and allow the
headroom power that the Punch is famous for. We’ve also developed
CRV
Circuitry (Controlled Rail Voltage) for tighter bass, and designed custom high
current, gold-plated, heavy-duty terminal block type connectors. As always, the
Punch amplifiers incorporate the patented Punch Equalization for the best
possible sound in your car environment.
RADICAL
NEW
L
OOK!
The brand new look for the Punch amplifiers is like none other. A unique
shape was achieved by the use of a cast aluminum heat sink. Die casting allowed
Rockford to be more creative in the cosmetic design of the amplifiers, offering an
alternative to the common, extruded “all lines run one way look”. Not only does
the cast heat sink give the Punch a radical new appearance, it allows us to offer
stealth wiring and mounting, as well as a 30% increase in thermal time. The
endcaps conceal the amplifier’s wiring and mounting screws. It’s also a deterent
to thieves because the endcaps must come off before the amplifier can be
removed.
We challenge you to find another amplifier that meets your expectations
for high performance, superb sound, revolutionary appearance, and legendary
Rockford Fosgate quality. That’s what we mean by the new reference amplifier.
It means redefining autosound. And Rockford Fosgate has done it again.
Hear the new Punch 40,60, 100, and 200 DSM amplifiers at your
authorized Rotkford Fosgate Dealer.
PUNCH 40 DSM
TWO CHANNEL POWER AMPLIFIER
DYNAMIC POWER RATING: (IHF-202 standard)
Measured at 14.4 Battery Voltage
160 Watts mono into
a
4 Ohm load
75 Watts per thonnel into o 2 Ohm
load
40 Watts per channel into
a 4 Ohm load
RMS POWER RATING: (IASCA standard)
Measured at 11.6 Battery Voltage
20 Watts RMS continuous power per channel both
channels driven into a 4 Ohm load from 20 to
20,000 Hz with less than 0.050 Total Harmonic
Distortion (THD)
40 Watts RMS continuous power per channel both
channels driven into a 2 Ohm load from 20 to
20,000 Hz with less than 0.1% Total Harmonic
Distortion (THD)
80 Watts RMS continuous power mono into a 4
Ohm load from 20 to 20,000 Hz with less than
0.1% Total Harmonic Distortion
(THD)
Signal to Noise Ratio:
>l
1OdB
A weighted
Frequency Response: 20 Hz to
20
kHz
f
1dB
10 Hz to 100 kHz
k3dB
Punch EQ: Bass
k18dB
maximum at 45 Hz
Treble
&12dB
maximum at 20 kHz
r
L
PRACTICE SAFE s
PUNCH 60 DSM
TWO CHANNEL POWER AMPLIFIER
DYNAMIC POWER RATING: (IHF-202 stondord)
Measured at 14.4 Battery Voltage
260 Watts mono into a 4 Ohm load
130 Watts per channel into a 2 Ohm load
80 Watts per channel into a 4 Ohm load
RMS POWER RATING: (lASCA stondord)
Measured at 11.6 Battery Voltage
30 Watts RMS continuous power per channel both
chonnels driven into
o
4 Ohm load from 20 to
20,000 Hz with less thon 0.05% Total Harmonic
Distortion (THD)
60 Watts RMS continuous power per (honnel both
thonnels driven into
o
2 Ohm load from 20 to
20,000 Hz with less than 0.1% Totol Harmonic
Distortion (THD)
120 Wotts RMS continuous power mono into a 4
Ohm load from 20 to 20,000 Hz with less than
0.1% Total Harmonic Distortion (THD)
Signal to Noise Ratio:
>1
1OdB A weighted
Frequency Response: 20 Hz to 20 kHz & 1 dB
10 Hz to 100 kHz k3dB
Punch EQ: Boss * 18dB maximum at 45 Hz
Treble
?
12dB maximum ot 20
kHz
PUNCH 100 DSM
TWO CHANNEL POWER AMPLIFIER
DYNAMIC POWER RATING: (IHF-202 stondord)
Measured ot 14.4 Battery Voltage
420 Watts mono into a 4 Ohm load
200 Watts per chonnel into a 2 Ohm load
110 Watts per channel into a 4 Ohm load
RMS POWER RATING: (IASCA stondord)
Measured ot 11.6 Buttery Voltage
50 Watts RMS continuous power per channel both
channels driven into a 4 Ohm lood from 20 to
20,000 Hz with less thon 0.05% Totol Harmonic
Distortion (THD)
10O
Watts
RMS continuous power per thonnel both
channels driven into
a
2 Ohm lood from 20 to
20,000 Hz with less thon 0.1% Total Harmonic
Distortion (THD)
200 Watts RMS continuous power mono into
a
4
Ohm lood from 20 to 20,000 Hz with less thon
0.1% Totol
Harmonic
Distortion (THD)
Signal to Noise Ratio: >11 0dB A weighted
Frequency Response: 20 Hz to 20 kHz
f
1dB
lOHztolDOkHz*3dB
Punch EQ: Bass
f
18dB maximum ot 45 Hz
Treble + 12dB maximum at 20
kHz
PUNCH 200 DSM
TWO CHANNEL POWER AMPLIFIER
DYNAMIC POWER RATING: (IHF-202 standard)
Measured ot 14.4 Battery Voltage
500 Watts mono into a 4 Ohm load
240 Watts per channel into a 2 Ohm load
150 Watts per channel into a 4 Ohm load
RMS POWER RATING: (IASCA standard)
Measured
at
11.6 Buttery Voltage
100 Watts RMS continuous power per channel both
channels driven into a 4 Ohm load from 20 to
20,000 Hz with less thon 0.05% Totol Harmonic
Distortion (THD)
200 Watts RMS continuous power per channel both
channels driven into
o
2 Ohm lood from 20 to
20,000 Hz with less than 0.1% Totol Harmonic
Distortion (THD)
400 Wotts RMS continuous power mono into a 4
Ohm lood from 20 to 20,000 Hz with less than
0.1% Totol Harmonic Distortion (THD)
Signol to Noise Ratio: >1 1OdB A weighted
Frequency Response: 20 Hz to 20 kHz
f
1 dB
lOHztolOOkHz?3dB
Punch EQ: Boss
f
18dB moximum ot 45 Hz
Treble
?
12dB maximum ot 20
kHz
All Rockford Fosgate electronics are manufactured in Tempe, Arizona
The quality of each piece is ensured with our world class
manufacturing techniques. Our handcrafted attention to detail at each
stage of the manufacturing process, from design to final test, keeps
Rockford Fosgate on the leading edge of high performance autosound
PUNCHZOODSM
NEW PUNCH DSM FEATURES AND BENEFITS
GOLD PLATED POWER/GROUND AND SPEAKER TERMINALS FOR
OWER RESISTANCE
Gold plating on Power/Ground ond Speaker Terminals lowers resistonce.
ATION
FOR FULL RANGE SOUND WITHOUT
tion
is specially designed to compensote for the
n most car environments. It specifically corrects poor
gh frequency roll-off.
N-CHANNEL V-FETS FOR LOWER DISTORTION
of inherent/y we// matched N-Channel
V-FETS
results in lower distortion.
DISCRETE SURFACE MOUNT FOR HIGHLY ACCURATE SOUND
Use of 90% discrete
surface mount components/modules results in lower noise
t
REAL TIME POWER PROTECTION FOR GREATEST POWER
OUTPUT UNDER ALL LOAD CONDITIONS
1
Analog computer on the protection module senses the instantaneous power
i
i
levels. When output reaches on unsafe level it will be reduced, unlike current
i:
limiting which often rouses premature protection or failure to protect at all.
o/l.
DOUBLE SIDED PC BOARDS FOR EXTRA DURABILITY
Double Sided Plated Through Gloss Epoxy PC gourd ond modules hove twice the
r
strength ond rigidity of competitive mode/s
i
I
0
COPPER GROUND PLANE FOR INCREASED EFFICIENCY
I Use of heavy duty, 3 oz. topper ground plane
in
power supply area of
PC
Board
/
lowers resistance for increased efficiency.
r
/
0
UPGRADED POWER SUPPLIES FOR MORE POWER AND QUICKER
RESPONSE TO MUSICAL TRANSIENTS
Upgraded Power Supplies with more capacitance ond increased transformer
throughput allow more power and quicker response to musical tronsients.
New CRV (Controlled Roil Voltage) Circuitry utilized for “tighter” boss.
EDGE PIN CONNECTOR FOR HIGHER RELIABILITY
e Pin Connector allows for factory testing to 100% of rated specifitation.
CAST ALUMINUM HEAT SINK FOR STEALTH MOUNTING
lost heot sink with endcaps allows stealth mounting with no wires showing. It is
also a theft deterrent
s
ince the endcaps must be removed to access the
mounting screws.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Rockford Fosgate PUNCH 100 DSM User manual

Brand
Rockford Fosgate
Model
PUNCH 100 DSM
Type
User manual
This manual is also suitable for

Rockford Fosgate PUNCH 100 DSM

The Rockford Fosgate PUNCH 100 DSM is a powerful and versatile two-channel power amplifier that is perfect for powering your car's audio system. With 100 watts RMS of power per channel into 4 ohms, the PUNCH 100 DSM can easily drive even the most demanding speakers.

The PUNCH 100 DSM is also very efficient, thanks to its Class A/B design. This means that it will produce less heat than other amplifiers, which can lead to longer life and better sound quality.

The PUNCH 100 DSM is also very easy to use. It features a simple and intuitive control panel, making it easy to adjust the gain and crossover settings. The amplifier also includes a built-in clipping indicator, which helps you to avoid damaging your speakers.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents