Paradyne DataPort Quick start guide

Brand
Paradyne
Model
DataPort
Type
Quick start guide
You have accessed an
older version of a
Paradyne product
document.
Paradyne is no longer a
subsidiary of AT&T. Any
reference to AT&T
Paradyne is amended to
read Paradyne
Corporation.
AREA CODE CHANGE
Please note that the area
code for Paradyne
Corporation in Largo,
Florida has changed from
813 to 727.
For any Paradyne
telephone number that
appears in this manual
with an 813 area code,
dial 727 instead.
B. Get your QuickLink II Fax software ready:
C. Get yourself ready!
1. Insert the QuickLink II Fax
™
disk into your disk drive.
2. From the Microsoft
®
Windows
™
Program Manager, select File Run, and then
type a:install (or b:install, if you are using drive B) at the command line. (Under
DOS, type at the C:\>prompt.) Press Enter.
3. Select the default settings that the install program and COMTEST display on your
screen. Let the Auto Detect feature determine which COM port you are using.
For Windows, let COMTEST test your modem and install the data compression
and error correction software.
You are now all set to explore a world of information and entertainment. Use
QuickLink II Fax to send and receive faxes, or to dial Bulletin Board Systems and
friends. Subscribe to online services like CompuServe
®
, GEnie
™
, and America
Online
®
. Connect with a few of the millions of people with computers and fax
machines.
If you have questions about your DataPort PCX modem, call 1-800-237-0016.
Your modem needs a serial cable to connect it to your
computer. One end must
have a 25-pin plug,
and the other end must
have a socket that
matches the
modem port on
your computer.
This is a 25-pin
or a 9-pin
connector.
Quick Installation for the DataPort External Modem
Plug the serial
cable into
your modem.
Plug the serial cable
into the serial port
of your PC.
Plug your phone
into the modem jack
marked PHONE.
Take one end of the line cord
(included with your modem)
and plug it into the modem
jack marked LINE.
Take the other end of the
line cable and plug it into
your telephone wall outlet.
Plug the
small power
connector
into the
modem
jack marked
POWER.
Plug the
transformer
at the other end
of the power cord
into a 110 Vac
power outlet.
Turn on your
modem and
your PC.
A. Get your DataPort modem ready:
Document No. 3705-A2-GB13-10
  • Page 1 1
  • Page 2 2

Paradyne DataPort Quick start guide

Brand
Paradyne
Model
DataPort
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents