2. Intermec
  3. 700 Series 700

Intermec 700 Series 700, 700 Series 700CNI, 700 Series 730B, 700 Series 761B, 741A, 751B, IP3 Intellitag Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Intermec 700 Series 700 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installation
IR Reflector
for 700 Color
Mobile Computer
Instructions
using an IP3
Reader Handle
Installing the IR Reflector onto your 700
Color Mobile Computer
1 Clean the surface on your mobile computer where the reflec-
tor is to be installed.
2 Peel the reflector tape from its white carrier sheet.
3 Align the tape along the upward slope above the I rDA lens as
shown.
4 Firmly press the reflector tape in place.
5 Carefully peel the tan protective paper from the reflector tape
to reveal the gold reflector layer.
Gold IR reflector tape
Align to upward slope
above the IrDA lens
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203
tel 425.348.2600
fax 425.355.9551
www.intermec.com
*962000048A*
PN: 962000048A
IRReflectorfor700ColorandIP3ReaderInstructions
E 2004 by Intermec Technologies
Corporation. All rights reserved.
U.S.A.
IrDA lens
Reflector tape
White carrier sheet
Peel tan protective to expose
gold reflector tape
/