H3C H3C S7503 S7506 AND S7506R SWITCH Installation guide

H3C S7502 Ethernet Switch

Installation Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Manual Version: T2-08046H-20071205-C-1.02

Product Version: Release 3000/3100

No part of this manual may be reproduced or transmitted in any form or by any means

without prior written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H

3

Care,

, TOP G, , IRF, NetPilot,

Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,

Storware, NQA, VVG, V

2

G, V

n

G, PSPT, XGbus, N-Bus, TiGem, InnoVision and

HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their

respective owners.

Notice

The information in this document is subject to change without notice. Every effort has

been made in the preparation of this document to ensure accuracy of the contents, but

all statements, information, and recommendations in this document do not constitute

the warranty of any kind, express or implied.

To obtain the latest information, please access:

http://www. h3c.com

Technical Support

customer_service@h3c.com

http://www. h3c.com

About This Manual

Related Documentation

In addition to this manual, each H3C S7502 Ethernet Switch documentation set

includes the following:

Manual Description

H3C S7500 Series Ethernet Switches

Operation Manual

Guides the user to configure the

features supported by the S7500 series.

H3C S7500 Series Ethernet Switches

Command Manual

Elaborates on the commands for

configuring the S7500 series.

Organization

H3C S7502 Ethernet Switch Installation Manual is organized as follows:

Chapter Contents

1 Product Overview

Introduces the characteristics of the

H3C S7502 Ethernet switch.

2 Line Processing Units

Introduces LPUs of the H3C S7502

Ethernet switch.

3 Installation Preparations

Introduces the preparations and

precautions for the H3C S7502 Ethernet

switch installation.

4 Hardware Installation

Introduces the integrated equipment

installation and cable connection

(including connection of grounding

cables, power cables, and interface

cables, recommended cabling, and

cable binding) of the H3C S7502

Ethernet switch.

5 System Commissioning

Introduces the initial power-on startup

process of the H3C S7502 Ethernet

switch.

6 Hardware Maintenance

Introduces the removal and installation

of power modules, LPUs, fan tray, and

delivered cable management brackets

of the H3C S7502 Ethernet switch.

7. Software Maintenance

Introduces how to load and upgrade

software of the H3C S7502 Ethernet

switch.

Chapter Contents

8. Troubleshooting

Introduces how to troubleshoot the

configuration system, power system,

fans, and LPUs of the H3C S7502

Ethernet Switch.

Appendix A Lightning Protection

Introduces lightning protection of the

H3C S7502 Ethernet switch.

Appendix B AC Power Cables Used in

Different Countries

Introduces the AC power cables used in

different countries, including 10A AC

power cables and 16A AC power cables.

Conventions

The manual uses the following conventions:

I. GUI conventions

Convention Description

< >

Button names are inside angle brackets. For example, click

<OK>.

[ ]

Window names, menu items, data table and field names

are inside square brackets. For example, pop up the [New

User] window.

/

Multi-level menus are separated by forward slashes. For

example, [File/Create/Folder].

II. Symbols

Convention Description

Warning

Means reader be extremely careful. Improper operation

may cause bodily injury.

Caution

Means reader be careful. Improper operation may cause

data loss or damage to equipment.

 Note Means a complementary description.

Environmental Protection

This product has been designed to comply with the requirements on environmental

protection. For the proper storage, use and disposal of this product, national laws and

regulations must be observed.

Installation Manual

H3C S7502 Ethernet Switch Table of Contents

i

Table of contents

Chapter 1 Product Overview ........................................................................................................1-1

1.1 General Information ........................................................................................................... 1-1

1.1.1 Preface .................................................................................................................... 1-1

1.1.2 Switching Engine..................................................................................................... 1-2

1.1.3 SRPU Specifications ............................................................................................... 1-2

1.2 LS81P12TE........................................................................................................................ 1-3

1.2.1 Specifications .......................................................................................................... 1-3

1.2.2 Panel and LEDs ...................................................................................................... 1-4

1.2.3 Port Cable ............................................................................................................... 1-5

1.3 LS81T12PE........................................................................................................................ 1-6

1.3.1 Specifications .......................................................................................................... 1-7

1.3.2 Panel and LEDs ...................................................................................................... 1-7

1.3.3 Port Cable ............................................................................................................... 1-8

1.4 LS81T16P .......................................................................................................................... 1-9

1.4.1 Specifications .......................................................................................................... 1-9

1.4.2 Panel and LEDs .................................................................................................... 1-10

1.4.3 Port Cable ............................................................................................................. 1-11

1.5 LS81T32P ........................................................................................................................ 1-11

1.5.1 Specifications ........................................................................................................ 1-11

1.5.2 Panel and LEDs .................................................................................................... 1-12

1.5.3 Port Cable ............................................................................................................. 1-13

1.6 LS81GT48B ..................................................................................................................... 1-13

1.6.1 Specifications ........................................................................................................ 1-13

1.6.2 Panel and LEDs .................................................................................................... 1-14

1.6.3 Port Cable ............................................................................................................. 1-15

1.7 LS81GP48 ....................................................................................................................... 1-15

1.7.1 Specifications ........................................................................................................ 1-15

1.7.2 Panel and LEDs .................................................................................................... 1-16

1.7.3 Port Cable ............................................................................................................. 1-17

1.8 LS81TGX2 ....................................................................................................................... 1-17

1.8.1 Specifications ........................................................................................................ 1-17

1.8.2 Panel and LEDs .................................................................................................... 1-18

1.8.3 Port Cable ............................................................................................................. 1-19

1.9 LS81TGX4 ....................................................................................................................... 1-19

1.9.1 Specifications ........................................................................................................ 1-19

1.9.2 Panel and LEDs .................................................................................................... 1-20

1.9.3 Port Cable ............................................................................................................. 1-21

1.10 LPUs Supported by SRPUs........................................................................................... 1-21

Installation Manual

H3C S7502 Ethernet Switch Table of Contents

ii

1.11 Physical Description of the S7502................................................................................. 1-23

1.11.1 Chassis and Slots ............................................................................................... 1-23

1.11.2 Color Description on the Fan Tray and Cards .................................................... 1-27

1.11.3 Backplane............................................................................................................ 1-28

1.11.4 Power Supply System ......................................................................................... 1-28

1.11.5 PoE Power Supply .............................................................................................. 1-29

1.11.6 Fan Tray .............................................................................................................. 1-30

1.12 Technical Specifications ................................................................................................ 1-31

Installation Manual

H3C S7502 Ethernet Switch Chapter 1 Product Overview

1-1

Chapter 1 Product Overview

1.1 General Information

1.1.1 Preface

H3C S7500 Series Ethernet Switches are modular, large-capacity Layer 2/3 Ethernet

switches that support wire-speed forwarding. The S7500 series include S7502, S7503,

S7506, and S7506R.

z The S7503, S7506, and S7506R are designed to operate at the convergence layer

of IP metropolitan area networks (MANs) and at the core layer of small to

medium-sized enterprise networks and campus area networks.

z The S7502 is designed to operate at the core layer of small to medium-sized

enterprise networks and at the convergence layer and access layer of IP MANs.

The S7502 is a high-capacity, cost-effective Layer 3 Ethernet switch. It provides

high-density GE/FE ports, as well as modularized components that enable you to

configure flexibly according to your specific needs.

Figure 1-1 S7502 in a MAN

The S7502 supports 1+1 AC power redundancy backup, and provides one switching

and routing processing unit (SRPU) slot and one line processing unit (LPU) slot. Both

the SRPU and the LPU can provide high-density service ports.

Installation Manual

H3C S7502 Ethernet Switch Chapter 1 Product Overview

1-2

1.1.2 Switching Engine

Switching engine (also known as SRPU) is the core of the S7502. Currently, switching

engines include the following models:

z LS81P12TE: provides four 10/100/1000Base-T ports and twelve 1000Base-X

(SFP) ports.

z LS81T12PE: provides twelve 10/100/1000Base-T ports and four 1000Base-X

(SFP) ports.

z LS81T16P: provides sixteen 10/100/1000Base-T ports and eight 1000Base-X

(SFP) ports, and supports XG high-speed bus.

z LS81T32P: provides thirty-two 10/100/1000Base-T ports and sixteen 1000Base-X

(SFP) ports, and supports XG high-speed bus.

z LS81GT48B: provides forty-eight 10/100/1000Base-T ports, and supports XG

high-speed bus.

z LS81GP48: provides forty-eight 1000Base-X (SFP) ports, and supports XG

high-speed bus.

z LS81TGX2: provides two 10GBase-XFP ports, and supports XG high-speed bus.

z LS81TGX4: provides four 10GBase-XFP ports and supports XG high-speed bus.

 Note:

You can insert an SRPU into the second slot (slot 1) of the S7502 to serve as an LPU.

Generally an SRPU can provide these functions:

z L2/L3 data forwarding between LPUs

z Route calculation

z LPU monitoring

z Processing of the monitoring signals on the power system and fans

1.1.3 SRPU Specifications

The following table lists the SRPU specifications.

Table 1-1 SRPU specifications

Item

Switching

capacity

Packet

forwarding

rate

Number

of VLANs

MAC

address

table

Routing

table

LS81T12PE 48 Gbps 36 Mpps 4 K 16 K 64 K

LS81P12TE 48 Gbps 36 Mpps 4 K 16 K 64 K

LS81T16P 144 Gbps 108 Mpps 4 K 16 K 64 K

Installation Manual

H3C S7502 Ethernet Switch Chapter 1 Product Overview

1-3

Item

Switching

capacity

Packet

forwarding

rate

Number

of VLANs

MAC

address

table

Routing

table

LS81T32P 192 Gbps 144 Mpps 4 K 16 K 64 K

LS81GT48B 192 Gbps 144 Mpps 4 K 16 K 64 K

LS81GP48 192 Gbps 144 Mpps 4 K 16 K 64 K

LS81TGX2 144 Gbps 108 Mpps 4 K 16 K 64 K

LS81TGX4 192 Gbps 144 Mpps 4 K 16 K 64 K

1.2 LS81P12TE

Figure 1-2 Appearance of an LS81P12TE

1.2.1 Specifications

Table 1-2 LS81P12TE specifications

Item LS81P12TE

CPU MPC8245 300 MHz

Boot ROM 512 KB

Flash memory 32 MB

SDRAM 256 MB

Dimensions (H × W x D)

40.1 × 376.7 × 354.5 mm (1.6 × 14.8 × 14 in.)

Port

z 4 × 10/100/1000Base-T Ethernet ports

z 12 × 1000Base-X (SFP) Ethernet ports

Max power consumption 40 W

Port rate

z 1000 Mbps full duplex (optical port)

z 10 Mbps half/full duplex (electrical port)

z 100 Mbps half/full duplex (electrical port)

z 1000 Mbps full duplex (electrical port)

SFP module Refer to Table 1-4

Installation Manual

H3C S7502 Ethernet Switch Chapter 1 Product Overview

1-4

Item LS81P12TE

Ethernet port cable and max

transmission distance

100 m (328 ft) over category-5 twisted pair cable

Supported standard

z IEEE 802.3

z IEEE 802.3u

z IEEE 802.3z

z IEEE 802.3ab

z IEEE 802.1p

z IEEE 802.1Q

z IEEE 802.1D

z IEEE802.1X

z IEEE802.1s

z IEEE802.1w

z IEEE 802.3x

z IEEE 802.3ad

 Note:

In this manual, card dimensions refer to those of a card with ejector levers.

1.2.2 Panel and LEDs

LS81P12TE has four 10/100/1000Base-T ports and twelve 1000Base-X (SFP) ports;

each has a status LED with it.

Figure 1-3 illustrates the panel of an LS81P12TE.

Figure 1-3 LS81P12TE panel

(1)

(2)

(5)(6)

(3)

(4)

(7)(8)

(1) Interface number (2) Silkscreen

(3) Nut (4) LPU edge (Green)

(5) Ejector lever (6) Interface status indicator

(7) SPF port (Gigabit) (8) Ethernet port (Gigabit)

Figure 1-4 LS81P12TE panel

Installation Manual

H3C S7502 Ethernet Switch Chapter 1 Product Overview

1-5

The status LEDs on an LS81P12TE are described in the following table.

Table 1-3 Description of LEDs on the panel of an LS81P12TE

LED Status

OFF The link is down or no link is presented.

ON The link is active.

LINK/ACT

Blinking Data is being transmitted or received on the port.

1.2.3 Port Cable

I. Optical port cables for 12-port 1000Base-X (SFP)

Table 1-4 Description of 1000Base-X (SFP) port cables

SFP module

Central

wavelength

Connector

Matching

cable

Maximum

transmission

distance

50 µm/125 µm

multimode

optical fiber

cable

550 m (1804

ft)

SFP-GE-SX-MM

850-A

850 nm LC

62.5 µm/125

µm multimode

optical fiber

cable

275 m (902 ft)

SFP-GE-LX-SM

1310-A

10 km (6 mi)

SFP-GE-LH40-S

M1310

1310 nm LC

9 µm/125 µm

single mode

optical fiber

cable

40 km (about

25 mi)

SFP-GE-LH40-S

M1550

40 km (about

25 mi)

SFP-GE-LH70-S

M1550

70 km (43 mi)

SFP-GE-LH100-

SM1550

1550 nm LC

9 µm/125 µm

single mode

optical fiber

cable

100 km (62 mi)

SFP-GE-LH70-S

M1470-CW

1470 nm LC

9 µm/125 µm

single mode

optical fiber

cable

70 km (43 mi)

SFP-GE-LH70-S

M1490-CW

1490 nm LC

9 µm/125 µm

single mode

optical fiber

cable

70 km (43 mi)

Installation Manual

H3C S7502 Ethernet Switch Chapter 1 Product Overview

1-6

SFP module

Central

wavelength

Connector

Matching

cable

Maximum

transmission

distance

SFP-GE-LH70-S

M1510-CW

1510 nm LC

9 µm/125 µm

single mode

optical fiber

cable

70 km (43 mi)

SFP-GE-LH70-S

M1530-CW

1530 nm LC

9 µm/125 µm

single mode

optical fiber

cable

70 km (43 mi)

SFP-GE-LH70-S

M1550-CW

1550 nm LC

9 µm/125 µm

single mode

optical fiber

cable

70 km (43 mi)

SFP-GE-LH70-S

M1570-CW

1570 nm LC

9 µm/125 µm

single mode

optical fiber

cable

70 km (43 mi)

SFP-GE-LH70-S

M1590-CW

1590 nm LC

9 µm/125 µm

single mode

optical fiber

cable

70 km (43 mi)

SFP-GE-LH70-S

M1610-CW

1610 nm LC

9 µm/125 µm

single mode

optical fiber

cable

70 km (43 mi)

SFP-GE-T — RJ45 — 100 m (328 ft)

II. Ethernet port cable for 4-port 10/100/1000Base-T

The Ethernet port cable is category-5 twisted pair cable, ended with RJ45 connectors,

whose maximum transmission distance is 100 m.

1.3 LS81T12PE

Figure 1-5 Appearance of LS81T12PE

Installation Manual

H3C S7502 Ethernet Switch Chapter 1 Product Overview

1-7

1.3.1 Specifications

Table 1-5 LS81T12PE specifications

Item LS81P12TE

CPU MPC8245 300 MHz

Boot ROM 512 KB

Flash memory 32 MB

SDRAM 256 MB

Dimensions (H × W x D)

40.1 × 376.7 × 354.5 mm (1.6 × 14.8 × 14 in.)

Port

z 12 × 10/100/1000Base-T Ethernet ports

z Four 1000Base-X (SFP) Ethernet ports

Max power consumption 45 W

Connector RJ-45, LC

Number of ports 16

Port rate

z 1000 Mbps full duplex (optical port)

z 10 Mbps half/full duplex (electric port)

z 100 Mbps half/full duplex (electric port)

z 1000 Mbps full duplex (electric port)

SFP module Refer to Table 1-4

Port cable and max transmission

distance

100 m (328 ft) over category-5 twisted pair

cable

Supported standard

z IEEE 802.3

z IEEE 802.3u

z IEEE 802.3z

z IEEE 802.3ab

z IEEE 802.1p

z IEEE 802.1Q

z IEEE 802.1D

z IEEE802.1X

z IEEE802.1s

z IEEE802.1w

z IEEE 802.3x

z IEEE 802.3ad

1.3.2 Panel and LEDs

LS81T12PE has 12 × 10/100/1000Base-T ports and four 1000Base-X (SFP) ports;

each has a status LED with it.

Figure 1-6 illustrates the panel of an LS81T12PE.

Installation Manual

H3C S7502 Ethernet Switch Chapter 1 Product Overview

1-8

Figure 1-6 LS81T12PE panel

(1) (2)

(5)(6)(7)

(3)

(4)

(8)

(1) Interface number (2) Silkscreen

(3) Nut (4) LPU edge (Green)

(5) Ejector lever (6) SPF port (Gigabit)

(7) Interface status LED (8) Ethernet port (Gigabit)

Figure 1-7 LS81T12PE panel

The status LEDs on an LS81T12PE are described in

Table 1-6.

Table 1-6 Description of LEDs on the panel of an LS81T12PE

LED Status

OFF The link is down or no link is presented.

ON The link is active.

LINK/ACT

Blinking Data is being transmitted or received on the port.

1.3.3 Port Cable

Refer to section 1.2.3 "Port Cable” on page 1-5 for information about the port cable

required by an LS81T12PE.

Installation Manual

H3C S7502 Ethernet Switch Chapter 1 Product Overview

1-9

1.4 LS81T16P

Figure 1-8 Appearance of LS81T16P

1.4.1 Specifications

LS81T16P provides the XG high-speed bus and 16 × 10/100/1000Base-T ports and 8 ×

1000Base-X (SFP) ports.

Table 1-7 LS81T16P specifications

Item LS81T16P

CPU MPC8245 300 MHz

BootROM 512 KB

Flash memory 32 MB

SDRAM 256 MB

Dimensions (H × W x D) 40.1 × 376.7 × 354.5 mm (1.6 × 14.8 × 14 in.)

Port

z 16 × 10/100/1000Base-T auto-sensing

Ethernet electric ports

z 8 × 1000Base-X (SFP) Ethernet ports

Max power consumption 55 W

Connector RJ45, LC

Number of ports 24

Port rate

z 10 Mbps half/full duplex

z 100 Mbps half/full duplex

z 1000 Mbps full duplex

z MDI/MDI-X auto-sensing

SFP module Refer to Table 1-4

Port cable and max transmission

distance

100 m (328 ft) over category-5 twisted pair

cable

Installation Manual

H3C S7502 Ethernet Switch Chapter 1 Product Overview

1-10

Item LS81T16P

Supported standard

z IEEE 802.3

z IEEE 802.3u

z IEEE 802.3z

z IEEE 802.3ab

z IEEE 802.1p

z IEEE 802.1Q

z IEEE 802.1D

z IEEE 802.1X

z IEEE 802.1s

z IEEE 802.1w

z IEEE 802.3x

z IEEE 802.3ad

1.4.2 Panel and LEDs

The following figure illustrates the panel of an LS81T16P.

Figure 1-9 LS81T16P panel

(1) (2)

(5)(6)(7)

(3)(4)

(1) Silkscreen (2) Nut

(3) LPU edge (Green) (4) Ejector lever

(5) SPF port (Gigabit) (6) Port status LED

(7) Ethernet port (Gigabit)

Figure 1-10 LS81T16P panel

The status LEDs on an LS81T16P are described in following table

Installation Manual

H3C S7502 Ethernet Switch Chapter 1 Product Overview

1-11

Table 1-8 Description of LEDs on the panel of an LS81T16P

LED Status

OFF The link is down or no link is presented.

ON The link is active.

LINK/ACT

Blinking Data is being transmitted or received on the port.

1.4.3 Port Cable

Refer to section 1.2.3 "Port Cable” on page 1-5 for information about the port cable

required by an LS81T16P.

1.5 LS81T32P

Figure 1-11 Appearance of LS81T32P

1.5.1 Specifications

LS81T32P provides the XG high-speed bus, 32 × 10/100/1000Base-T auto-sensing

Ethernet electric ports and 16 ×1000Base-X (SFP) Ethernet ports.

Table 1-9 LS81T32P specifications

Item LS81T32P

CPU MPC8245 300 MHz

BootROM 512 KB

Flash memory 32 MB

SDRAM 256 MB

Dimensions (H × W x D) 40.1 × 376.7 × 354.5 mm (1.6 × 14.8 × 14 in.)

Port

z 32 × 10/100/1000Base-T auto-sensing

Ethernet electric ports

z 16 × 1000Base-X (SFP) Ethernet ports

Max power consumption 95 W

Connector RJ45, LC

Number of ports 48

Installation Manual

H3C S7502 Ethernet Switch Chapter 1 Product Overview

1-12

Item LS81T32P

Port rate

z 10 Mbps half/full duplex

z 100 Mbps half/full duplex

z 1000 Mbps full duplex

z MDI/MDI-X auto-sensing

SFP module Refer to Table 1-4

Port cable and max transmission

distance

100 m (328 ft) over category-5 twisted pair

cable

Supported standard

z IEEE 802.3

z IEEE 802.3u

z IEEE 802.3z

z IEEE 802.3ab

z IEEE 802.1p

z IEEE 802.1Q

z IEEE 802.1D

z IEEE 802.1X

z IEEE 802.1s

z IEEE 802.1w

z IEEE 802.3x

z IEEE 802.3ad

1.5.2 Panel and LEDs

The following figure illustrates the panel of an LS81T32P.

Figure 1-12 LS81T32P panel

(1) (2)

(5)(6)(7)

(3)

(4)

(1) Silkscreen (2) Nut

(3) LPU edge (Green) (4) Ejector lever

(5) Port status LED (6) SPF port (Gigabit)

(7) Ethernet port (Gigabit)

Figure 1-13 LS81T32P panel

Installation Manual

H3C S7502 Ethernet Switch Chapter 1 Product Overview

1-13

The status LEDs on an LS81T32P are described in following table.

Table 1-10 Description of LEDs on the panel of an LS81T32P

LED Status

OFF The link is down or no link is presented.

ON The link is active.

LINK/ACT

Blinking Data is being transmitted or received on the port.

1.5.3 Port Cable

Refer to section 1.2.3 "Port Cable” on page 1-5 for information about the port cable

required by an LS81T32P.

1.6 LS81GT48B

Figure 1-14 Appearance of LS81GT48B

1.6.1 Specifications

LS81GT48B provides the XG high-speed bus, and 48 ×10/100/1000Base-T Ethernet

ports.

Table 1-11 LS81GT48B specifications

Item LS81GT48B

CPU MPC8245 300 MHz

BootROM 512 KB

Flash memory 32 MB

SDRAM 256 MB

Dimensions (H × W x D)

40.1 × 376.7 × 354.5 mm (1.6 × 14.8 ×

14 in.)

Max power consumption 85 W

Connector RJ45

Number of ports 48

Installation Manual

H3C S7502 Ethernet Switch Chapter 1 Product Overview

1-14

Item LS81GT48B

Port rate

z 10 Mbps half/full duplex

z 100 Mbps half/full duplex

z 1000 Mbps half/full duplex

z MDI/MDI-X auto-sensing

Port cable and max transmission

distance

100 m (328 ft) over category-5 twisted

pair cable

Supported standard

z IEEE 802.3

z IEEE 802.3ab

z IEEE 802.3x

z IEEE 802.1p

z IEEE 802.1D

z IEEE 802.1Q

z IEEE 802.1X

z IEEE 802.1s

z IEEE 802.1w

1.6.2 Panel and LEDs

The following figure illustrates the panel of an LS81GT48B.

Figure 1-15 LS81GT48B panel

(1) (2)

(5)(6)

(3)

(4)

(1) Silkscreen (2) Nut

(3) LPU edge (Green) (4) Ejector lever

(5) Ethernet port LED (6) Ethernet port

Figure 1-16 LS81GT48B panel

Each port is with a green LED.

Page is loading ...

H3C H3C S7503 S7506 AND S7506R SWITCH Installation guide

This manual is also suitable for

H3C H3C S7503 S7506 AND S7506R SWITCH Installation guide

Related papers

Other documents