Campbell Scientific EC150-SH Owner's manual

EC150-SH Packing Information

The EC150 components are placed in a foam cutout that helps protect them from damage during shipment. The

EC150 should look like the pictures below. After unpacking, it is recommended to save the foam cutout as the EC150

components should be placed in the foam cutout whenever the EC150 is transported to another location.

FIGURE 1. Foam Cutout and Components in Upper Level of Packaging

FIGURE 2. Foam Cutout and Components in Lower Level of Packaging

EC150 Sensor

Head

EC150 Sensor Head Cable

#26520 Temperature Probe, 10 ft

#26563 USB Cable

41303-5A 6-Plate

Solar Radiation Shield

EC100 Electronics

With Enclosure

#25995 EC100

Enclosure Mounting

CM250 Leveling

Mount

Certificate of Conformance

Printed 7/1/2014