Custom Audio Electronics MC402 User manual

Type
User manual

Custom Audio Electronics MC402 is a dynamic overdrive/distortion pedal that provides up to +20dB of uncolored clean boost. It features a versatile overdrive section with adjustable gain, tone, and output controls, allowing you to dial in a wide range of distorted sounds. The boost section can be used independently or stacked with the overdrive for even more tonal possibilities. With its sensitive and responsive design, the MC402 faithfully translates your picking dynamics and touch, making it an expressive tool for any guitarist.

Custom Audio Electronics MC402 is a dynamic overdrive/distortion pedal that provides up to +20dB of uncolored clean boost. It features a versatile overdrive section with adjustable gain, tone, and output controls, allowing you to dial in a wide range of distorted sounds. The boost section can be used independently or stacked with the overdrive for even more tonal possibilities. With its sensitive and responsive design, the MC402 faithfully translates your picking dynamics and touch, making it an expressive tool for any guitarist.

92503004778 REVB
MC402 BOOST/ OVERDRIVE
MC402 BOOST/ OVERDRIVE
DIRECTIONS
• Run a cable from your guitar to
the Boost/Overdrive’s Input jack
and run another cable from the
Boost/Overdrive’s Output jack
to your amplier.
BOOST SECTION:
• Start with the BOOST knob
at 0dB and turn the Boost
section on by depressing
the BOOST footswitch.
• Rotate the BOOST knob
clockwise to achieve
desired level of boost.
OVERDRIVE SECTION:
• Start with OUTPUT, TONE and
GAIN controls at 12 o’clock.
• Turn the OVERDRIVE section
on by depressing the BOOST
footswitch.
Rotate the OUTPUT knob
clockwise to increase the
overall volume of the eect or
counterclockwise to decrease it.
Rotate the TONE knob clockwise
for a brighter sound and
counterclockwise for a
darker sound.
Rotate the GAIN knob clockwise
to increase the amount of
distortion and counterclockwise
to decrease it.
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
CONTROLS
BOOST knob controls amount
of clean boost
OUTPUT knob controls overall
volume of distortion eect
TONE knob shapes color of
distorted signal
GAIN knob controls amount
of distortion
BOOST footswitch toggles
boost eect on/bypass
(indicated by blue LED)
OVERDRIVE footswitch toggles
overdrive eect on/bypass
(indicated by red LED)
SAMPLE SETTINGS
BOOST OVERDRIVE
N/A
BOOST OVERDRIVE
N/A
BOOST OVERDRIVE
N/A
DESCRIPTION
• Dynamic overdrive/distortion
• Sensitive and responsive to
touch and picking dynamics
Up to +20dB of uncolored
clean boost
SPECIFICATIONS
Input Impedance 1 kΩ
Output Impedance
Boost ON <150 Ω
Overdrive ON/ Boost OFF <15 kΩ
Boost Gain 20 dB
Signal to Noise Ratio* >87 dB
Bypass True Hardwire
Current Draw <5.5 mA
Power Supply 9 Volts DC
* A-weighted, all controls at mid position
POWER
The MXR/CAE Boost/Overdrive can
be powered by one 9-volt battery
(accessed through the bottom of the
pedal), a Dunlop ECB003 (ECB003E
in Europe) AC adapter or a DC
Brick
series power supply.
  • Page 1 1
  • Page 2 2

Custom Audio Electronics MC402 User manual

Type
User manual

Custom Audio Electronics MC402 is a dynamic overdrive/distortion pedal that provides up to +20dB of uncolored clean boost. It features a versatile overdrive section with adjustable gain, tone, and output controls, allowing you to dial in a wide range of distorted sounds. The boost section can be used independently or stacked with the overdrive for even more tonal possibilities. With its sensitive and responsive design, the MC402 faithfully translates your picking dynamics and touch, making it an expressive tool for any guitarist.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI