Cobra Electronics Tag - BT225UNI Owner's manual

WARRANTY

COBRA ELECTRONICS CORPORATION warrants that its Cobra

Tag, and the compo-

nent parts thereof, will be free of defects in workmanship and materials for a term of

one year from the date of rst consumer purchase. This warranty may be enforced

by the rst consumer purchaser, provided that the product is used solely within

the U.S.A. and Canada. Cobra will, without charge, repair or replace, at its option,

defective Cobra Tag products or component parts upon delivery to the Cobra Factory

Service Department, if accompanied by proof of the date of rst consumer purchase,

such as a duplicated copy of a sales receipt. The consumer must pay any initial ship-

ping charges required to ship the product for warranty service. Return shipping will

be at Cobra’s expense if the product is repaired or replaced under warranty.

This warranty gives the consumer specic rights, and he or she may also have other

rights which vary from state to state.

EXCLUSIONS – THIS LIMITED WARRANTY DOES NOT APPLY:

1. To any product damaged by accident;

2. In the event of misuse or abuse of the product or as a result of unauthorized

alterations or repairs;

3. If the serial number has been altered, defaced or removed;

4. If the owner of the product resides outside the U.S.A. and Canada.

All implied warranties, including warranties of merchantability and tness for a

particular purpose are limited in duration to the term of this warranty. COBRA SHALL

NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES; IN-

CLUDING, WITHOUT LIMITATION, DAMAGES RESULTING FROM LOSS OF USE OR COST

OF INSTALLATION. Some states do not allow limitations on the duration of an implied

warranty and/or do not allow the exclusion or limitation of incidental or consequential

damages. Part or all of the above limitations may not apply to some consumers.

It is the user’s responsibility to use this product prudently and responsibly. This prod-

uct is intended to be used only as a travel aid and must not be used for any purpose

requiring precise measurement of direction, distance, location and/or topography.

PRODUCT SERVICE

For any questions about operating or installing this new Cobra product, or if parts

are missing… PLEASE CALL COBRA FIRST…do not return this product to the store.

If this product should require factory service, please call Cobra rst before sending

the product. This will ensure the fastest turnaround time on any repair. If Cobra asks

that the product be sent to its factory, the following must be furnished to have the

product serviced and returned:

1. For Warranty Repair include some form of proof-of-purchase, such as a mechanical

reproduction or carbon of a sales receipt. Make sure the date of purchase and product

model number are clearly readable. If the originals are sent, they cannot be returned;

2. Send the entire product;

3. Enclose a description of what is happening with the product. Include a typed or clearly

printed name and address of where the product is to be returned, with phone number

(required for shipment).

4. Pack the product securely to prevent damage in transit. If possible, use the

original packing material;

5. Ship prepaid and insured by way of a traceable carrier such as United Parcel

Service (UPS) or Priority Mail to avoid loss in transit to:

Cobra Factory Service

Cobra Electronics Corporation

6500 West Cortland Street

Chicago, Illinois 60707 U.S.A.;

If the product is in warranty, upon receipt of the product, it will either be repaired or

exchanged depending on the model. Please allow approximately 3 – 4 weeks before

contacting Cobra for status. If the product is out of warranty, a letter will automati-

cally be sent with information as to the repair charge or replacement charge.

For any questions, please call 773-889-3087 for assistance.

DECLARATION OF CONFORMITY

Trade Name: Cobra

Model No.: BT225 UNI

Responsible Party: Cobra Electronics Corporation

Address: 6500 West Cortland St., Chicago, IL 60707

USA, www.cobra.com

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation

is subject to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation of this device.

You are cautioned that any changes or modications not expressly approved in this

manual could void your authority to operate this equipment.

This equipment must not be co-located or operated in conjunction with any other

antenna or transmitter.

This equipment complies with FCC/IC radiation exposure limits set forth for uncon-

trolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in

Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.

This equipment has very low levels of RF energy that it is deemed to comply without

testing of specic absorption ratio (SAR).

Note

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reaso-

nable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Consult the dealer or an experienced radio/TV technician for help.

TRADEMARK ACKNOWLEDGEMENT

Cobra

, Nothing Comes Close to a Cobra

and the snake design are registered

trademarks of Cobra Electronics Corporation, USA.

Cobra Electronics Corporation

™

is a trademark of Cobra Electronics Corporation, USA.

iPhone

and iPod Touch

and iPad

are trademarks of Apple, Inc, registered with the

U.S. and other countries.

The Trademark BlackBerry

is owned by Research In Motion Limited and is

registered in the United States and may be pending or registered in other countries.

The Bluetooth

word mark and logos are owned by the Bluetooth SIG, Inc. and any

use of such marks by Cobra is under license.

Android is a trademark of Google Inc. Use of

this trademark is subject to Google Permissions.

BT 225 UNI

Operating Instructions

Mode d’emploi

Instrucciones para el uso

Stop Searching. Tag Your Essentials.

Setup Your Cobra

Tag

Charging the Cobra Tag

1. Plug the included USB cable into a USB port on your

computer or any standard wall adapter with a USB port.

2. Plug the Micro-USB connector into the bottom of the

Cobra Tag for charging. The light will stay on and be

colored RED while the Cobra Tag is charging.

3. The light will turn to BLUE when the Cobra Tag is fully

charged. Please charge fully before rst use for best

operation.

• IfthebatteryisLOW(andthedeviceisON)-thelight

will blink RED once every minute.

• TheCobraTagwillholdachargewhileinusefora

maximum of 7 days.

• SeesectiononCobraTagStatusIndicatorsand

Button Controls for more information on controlling

the Cobra tag.

Installing the App & Pairing to your iPhone

Android

™

or Blackberry

Device

1. Go to the Apple

App Store, Google Play or

Blackberry

App World or the on your mobile phone

and search for the «Cobra Tag» App.

2. Download and install the App and follow the onscreen

setup instructions. This will install the App on your

phone to make it possible for Cobra Tag and your

phone to communicate.

3. Turn on the Cobra Tag device by pressing in the button

for 1 second. It will beep and the BLUE light will blink

three times.

4. Launch the Cobra Tag App from the application menu

on the mobile phone.

5. Select "Add New Device" from the menu in the App

and select the Cobra Tag. If prompted for a password

then enter 0000.

6. The basic Cobra Tag setup is now complete. You can

start to use it!

• TheAppalsoincludessomeverysophisticated

options such as; e-mail and SMS notications,

naming your tag, changing device icons, etc. See

www.cobratag.com for more details.

• TheCobraTagcannotbeusedwithoutinstallingthe

App on your mobile phone.

• Uptoseven(7)CobraTagscanbeusedwithmost

Blackberry and Android phones. You can Add

additional Cobra Tags from the device list in the App.

Using the Cobra

Tag

1. Activating the System

a. Attach the Cobra Tag to your key ring or any other

valuable you would like to protect.

b. Make sure the Cobra Tag device is turned ON.

Start the Cobra Tag App on your mobile phone.

Make sure the Cobra Tag devices you want enabled

are turned ON in the device list. This enables the

wireless link between the Cobra Tag and your

mobile phone. It can run in the background to keep

your valuable protected.

2. Protect Your Valuables- Two-Way

Separation Alarm

a. The Cobra Tag and your phone will start to ring

when they become separated by more than about

30 feet. Please note, this distance may vary based

on variations in the paired phone and the

obstructions between the phone and the tag.

b. The App includes advanced settings such as; ring

tones, auto phone lock, and silence

override. Please see the in-App instructions for

more details on advance features.

3. Find Your Valuables

a. Press the button on your Cobra Tag to make the

phone ring and/or vibrate. You can use this if you

have the Cobra Tag and can’t nd your phone.

b. Press the Ring Device Button in the App to make

Cobra Tag ring. You can use this if you have your

phone and can’t nd your valuable attached to

the Cobra Tag.

c. The Cobra Tag will remain on and attempt to pair

with the mobile phone when they are out of range.

You can see the connection status in the App. If they

are paired then you are close!

4. Locate Your Valuables

If you do not hear the alert during separation, the

Cobra Tag records the GPS coordinates and time

of separation. This information can be sent out via

email or sms. The information can even OPTIO-

NALLY be posted to facebook or twitter so your

friends and family can help recover your lost items.

b. Make sure to enable this function and setup your

list of contacts in the App if you want to receive

these notications.

Note: • TheCobraTagandthemobilephoneneed

to be within Bluetooth range (about 30 feet),

charged and paired for any of the alarms and

notications to work properly.

 • Pleasetestallofthedesiredfunctionality

on your specic mobile phone during the

setup procedure to ensure your expected

functionality.

• TopowertheCobraTagON.IfthedeviceisOFF,

press the button once to turn on. Blue LED blinks 3

times to indicate ON status.

• TopowertheCobraTagOFF.IftheTagisON,press

and held for more than 10 seconds to turn OFF. The

Tag will beep to conrm power off. Red LED blinks 3

times to indicate off status

• IftheCobraTagisONandconnected

to

mobilephone.

The LED light will remain Off and does NOT blink.

• IftheCobraTagisONbutdisconnectedfromthe

mobile phone (trying to connect) the Blue LED blinks

once every 1 minute

• IftheCobraTagbatteryislowtheRedLEDblinks

once every 1 minute.

Customer Assistance

HINTS

Cobra Tag Status Indicators &

Button Controls

HINTS

Should there be any problems with this product, or

further information is needed on its features, please refer

to this manual. For further assistance after reading this

manual, Cobra Electronics offers the following customer

assistance services:

FOR ASSISTANCE IN THE U.S.A.

• Automated Help Desk (English only) 24 hours a day,

7 days a week at 773-889-3087 (phone).

• Customer Assistance Operators (English and

Spanish) 8:00 a.m. to 5:30 p.m. Central Time, Mon.

through Fri. (except holidays) at 773-889-3087

(phone).

• Questions (English and Spanish) Faxes can be

received at 773-622-2269.

• Technical Assistance (English only) www.cobra.com

(on-line: Frequently Asked Questions).

• Technical Assistance (English and Spanish) produc-

[email protected] (e-mail)

BT225UNI_MANL.indd 1 3/27/12 4:33 PM

Page is loading ...

Cobra Electronics Tag - BT225UNI, BT225 UNI Owner's manual

Related papers

Other documents