COP-USA CL-DVR Owner's manual

COP-USA
Brand
COP-USA
Model
CL-DVR
Type
Owner's manual
HR
HR
MIN
MIN
SET
SET
LIGHT
LIGHT
PM
Alarm Clock DVR Instructions: ( CL-DVR )
To Change the Time and Date:
Connect the Alarm Clock DVR into the computer using a USB cable.
Turn the DVR ON using your remote control.
Run the Applicaon "Time_adjust_CLDVR.exe".
This window will show your device by the drive.
When you see a leer in the “Devices:” box,
Click
on “UPDATE” and the DVR will automacally sync the
Time and Date with your Computer.
Your DVR Time and Date is updated.
To Stop the Talking on Alarm Clock:
Video Playback:
Setup the DVR to Record:
Press the “SET” button 3 times, until these icons flashes:
Use the USB port or use a Mini SD Card Reader to access its contents.
Turn the DVR “ON” using the Remote Control. The Blue Light will turn ON and stay ON.
If using the USB port, make sure the DVR is “ON” .
Then press “HR” until these icons and disappears:
After 8 sec, will hear a bip sound confirming the setting.
HR
H
R
MIN
MI
N
SET
SET
LIGH
T
LI
GHT
PM
HR
HR
MIN
MIN
SET
S
ET
LIGHT
LIGHT
PM
HR
H
R
MIN
M
IN
SET
SET
LIGH
T
LI
GHT
ON
OFF
USB
TF
HR
HR
M
IN
M
IN
SET
SET
LIGHT
LIG
HT
PM
Blue Light ON
Snapshot
Manual Recording (Blue Light will Flash 3x and turn off).
Motion Recording (The Blue Light will Flash 3x and turn off).
DVR ON/OFF
Audio Recording
(Blue Light will Flash
once and will turn off)
(Blue Light will Flash
once and will turn off)
Note: When the unit is not recording, the blue light will be always ON.
  • Page 1 1

COP-USA CL-DVR Owner's manual

COP-USA
Brand
COP-USA
Model
CL-DVR
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents