Page is loading ...
User Manual
Table of Contents
1. Overview ................................................................................................................... 1
2. Specification .............................................................................................................. 1
3. Dimensions ............................................................................................................... 3
4. LED Indicators ........................................................................................................... 5
5. Lithium Battery ......................................................................................................... 5
6. Entering BIOS ............................................................................................................ 5
7. Installing Windows OS .............................................................................................. 5
8. Turning ON/OFF the HMI .......................................................................................... 6
9. Driver ........................................................................................................................ 7
10. Touchscreen Calibration ........................................................................................... 7
Warning
This is Class A Product. In domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Other company names, product names, or trademarks in this document are the
trademarks or registered trademarks of their respective companies.
This document is subject to change without prior notice.
Copyright© 2019 Weintek Lab., Inc. All rights reserved.
cMT-iPC15 / cMT-iPC10 User Manual
1
1. Overview
cMT-iPC15 / cMT-iPC10, based on Windows® OS, can connect cMT HMI using cMT
Viewer and serves as HMI, and it runs third party applications. By using cMT
Launcher dedicatedly designed by Weintek R & D group, it’s easy to customize
cMT-iPC15 / cMT-iPC10’s desktop into smartphone-like UI and manage access control
of apps. The shortcut name and icon of the application can be customized and placed
in different categories and different pages.
2. Specification
cMT-iPC15
Display
Display
15” TFT
Resolution
1024 x 768
Brightness (cd/m
2
)
400
Contrast Ratio
700:1
Backlight Type
LED
Backlight Life Time
>50,000 hrs.
Colors
16.2M
LCD Viewing Angle (T/B/L/R)
70/70/80/80
Touch Panel
Type
4-wire Resistive Type
Accuracy
Active Area Length(X)±2%, Width(Y)±2%
Memory
SSD
64 GB
RAM
4 GB
Processor
Intel Atom
®
E3827 processor
I/O Port
SD Card Slot
SD/SDHC/SDXC
USB Host
USB 2.0 x 2 / USB 3.0 x 1
Ethernet
10/100/1000 Base-T x 2
Audio Output
Built-in Mono Speaker
Audio Line Out – 3.5 mm jack x 1
RTC
Built-in
Power
Input Power
24±20%VDC
Power Isolation
Built-in
Power Consumption
2A@24VDC
Voltage Resistance
500VAC (1 min.)
Isolation Resistance
Exceed 50M @ 500VDC
Vibration Endurance
10 to 25Hz(X,Y,Z direction 2G 30 minutes)
Specification
PCB Coating
Yes
Enclosure
Aluminum
Dimensions WxHxD
366 x 293 x 54.2 mm
Panel Cutout
352 x 279 mm
Weight
Approx. 2.76 kg
Mount
Panel mount, VESA mount 75 x 75 mm
Environment
Protection Structure
UL Type 4X (indoor use only) / NEMA4 / IP65
Compliant Front Panel
Storage Temperature
-20° ~ 70°C (-4° ~ 158°F)
Operating Temperature
0° ~ 50°C (32° ~ 122°F)
Relative Humidity
10% ~ 90% (non-condensing)
Certificate
CE
CE marked
UL
cULus Listed
OS Support
* Windows
®
7 / Windows
®
8.1 / Windows
®
10 IoT
Enterprise
(EasyLauncher + cMT Viewer)
cMT-iPC15 / cMT-iPC10 User Manual
2
*License of Windows OS is excluded.
*Windows is a trademark or a registered trademark of Microsoft Corporation in the United
States and/or other countries.
*Intel Atom is a trademark of Intel Corporation or its subsidiaries in the U.S. and/or other
countries.
cMT-iPC10
Display
Display
9.7” TFT
Resolution
1024 x 768
Brightness (cd/m
2
)
350
Contrast Ratio
500:1
Backlight Type
LED
Backlight Life Time
>30,000 hrs.
Colors
262K
LCD Viewing Angle (T/B/L/R)
60/70/70/70
Touch Panel
Type
4-wire Resistive Type
Accuracy
Active Area Length(X)±2%, Width(Y)±2%
Memory
SSD
64 GB
RAM
4 GB
Processor
Intel Atom
®
E3827 processor
I/O Port
SD Card Slot
SD/SDHC/SDXC
USB Host
USB 2.0 x 2 / USB 3.0 x 1
Ethernet
10/100/1000 Base-T x 2
Audio Output
Built-in Mono Speaker
Audio Line Out – 3.5 mm jack x 1
RTC
Built-in
Power
Input Power
24±20%VDC
Power Isolation
Built-in
Power Consumption
1.5A@24VDC
Voltage Resistance
500VAC (1 min.)
Isolation Resistance
Exceed 50M @ 500VDC
Vibration Endurance
10 to 25Hz (X, Y, Z direction 2G 30 minutes)
Specification
PCB Coating
Yes
Enclosure
Plastic
Dimensions WxHxD
260.6 x 203.1 x 44.5 mm
Panel Cutout
250 x 192 mm
Weight
Approx. 1.1 kg
Mount
Panel mount, VESA mount 75 x 75 mm
Environment
Protection Structure
UL Type 4X (indoor use only) / NEMA4 / IP65
Compliant Front Panel
Storage Temperature
-20° ~ 60°C (-4° ~ 140°F)
Operating Temperature
0° ~ 50°C (32° ~ 122°F)
Relative Humidity
10% ~ 90% (non-condensing)
Certificate
CE
CE marked
UL
cULus Listed
OS Support
* Windows
®
7 / Windows
®
8.1 / Windows
®
10 IoT
Enterprise
(EasyLauncher + cMT Viewer)
*License of Windows OS is excluded.
*Windows is a trademark or a registered trademark of Microsoft Corporation in the United
States and/or other countries.
*Intel Atom is a trademark of Intel Corporation or its subsidiaries in the U.S. and/or other
countries.
cMT-iPC15 / cMT-iPC10 User Manual
3
3. Dimensions
cMT-iPC15
Cutout Dimensions:
352mm [13.86"] W x 279mm [10.98"] H
352mm
[13,86"]
279mm
[10,98"]
Front View
350mm
[13,78"]
277mm
[10,91"]
cc
d
a
b
c c
Rear View
Bottom View
g
h i
j
f
e
Panel-mounting clamp slots, 10 places
Top View
24,2mm
[0,95"]
54,2mm
[2,13"]
5,7mm
[0,22"]
Side View
293mm
[11,54"]
366mm
[14,41"]
a
Fuse
f
USB Host port 3.0
b
Power Connector
g
USB Host port 2.0
c
VESA 75mm Screw
Holes
h
LAN 2
d
Reset Button
i
LAN 1
e
SD CARD SLOT
j
Line Out
cMT-iPC15 / cMT-iPC10 User Manual
4
cMT-iPC10
260.6mm [10.26"]
203.1mm [8.00"]
250mm [9.84"] W x 192mm [7.56"] H
250mm [9.84"]
192mm [7.56"]
R4mm [R0.16"]
250mm [9.84"] W x 192mm [7.56"] H
250mm [9.84"]
192mm [7.56"]
R4mm [R0.16"]
英文版
7.9mm [0.31"]
36.95mm [1.45"]
190.2mm [7.49"]
247.7mm [9.75"]
a a
a a
f
e
d
c
g
h
b
44.5mm [1.75"]
260.6mm [10.26"]
203.1mm [8.00"]
250mm [9.84"] W x 192mm [7.56"] H
250mm [9.84"]
192mm [7.56"]
R4mm [R0.16"]
250mm [9.84"] W x 192mm [7.56"] H
250mm [9.84"]
192mm [7.56"]
R4mm [R0.16"]
簡中版
7.9mm [0.31"]
36.95mm [1.45"]
190.2mm [7.49"]
247.7mm [9.75"]
a a
a a
f
e
d
c
g
h
b
44.5mm [1.75"]
260.6mm [10.26"]
203.1mm [8.00"]
250mm [9.84"] W x 192mm [7.56"] H
250mm [9.84"]
192mm [7.56"]
R4mm [R0.16"]
250mm [9.84"] W x 192mm [7.56"] H
250mm [9.84"]
192mm [7.56"]
R4mm [R0.16"]
日文版
7.9mm [0.31"]
36.95mm [1.45"]
190.2mm [7.49"]
247.7mm [9.75"]
a a
a a
f
e
d
c
g
h
b
44.5mm [1.75"]
上面図
側面図
パネルカット寸法図
正面図
背面図
下面図
パネルカット寸法図
a
VESA 75mm Screw
Holes
e
USB Host port 2.0
b
Power Connector
f
LAN 2
c
SD CARD SLOT
g
LAN 1
d
USB Host port 3.0
h
Line Out
cMT-iPC15 / cMT-iPC10 User Manual
5
4. LED Indicators
cMT-iPC15
The LED indicators indicate:
Orange LED: Power status
Green LED: SSD writing status
Blue LED: Ethernet communication status
cMT-iPC10
The LED indicator indicates:
Orange LED: Power status
5. Lithium Battery
The cMT-iPC15 / cMT-iPC10 require a CR-2032 lithium battery to keep the RTC
running.
After replacing the battery, please enter BIOS to manually set RTC.
Note: Please use CR-2032 as the replacement battery when battery runs out. Using
other types of battery can cause incorrect display of time.
6. Entering BIOS
You can enter BIOS settings by the following two ways:
• Connect a USB keyboard and press F2 key at startup.
• Press and hold on one of the four corners of the screen at startup.
7. Installing Windows OS
1. Read the Windows installation disc by connecting a USB CD-ROM drive.
(Or, burn the Windows ISO image to a USB drive, and then insert the USB drive
into HMI.)
2. Press and hold on the center of the screen and then select the device.
cMT-iPC15 / cMT-iPC10 User Manual
6
(Or, connect a USB keyboard, and press F5 key at
startup.)
Note:
1. Since cMT-iPC15 / cMT-iPC10 does not offer Windows
recovery disc, it is highly recommended to back up the
system after installing Windows.
8. Turning ON/OFF the HMI
ON:
To turn on the HMI, go to BIOS and set whether to automatically turn on, or press the
power button to turn on, when the HMI is connected to power supply.
Go to BIOS \ Advanced \ South Cluster Configuration \ Miscellaneous Configuration \
State After G3:
S0 State: Automatically turn on when connected to power supply.
S5 State: Press the power button to turn on when connected to power supply.
OFF:
To turn off the HMI, you can either turn off in Windows, or set the function of the
power button in Windows Control Panel \ System and Security \ Power Options \
Change what the power buttons do, and press the power button when HMI is ON.
Unplugging power cord directly can cause stop error and lead to data loss.
cMT-iPC15 / cMT-iPC10 User Manual
7
9. Driver
After installing Windows OS, install the required software / hardware drivers, in the
same order as listed in the following link.
Download Link:
cMT-iPC15:
http://www.weintek.com/Download/cMT/cMT_iPC15/driver/cMT_iPC15_driver.htm
cMT-iPC10:
http://www.weintek.com/Download/cMT/cMT_iPC10/driver/cMT_iPC10_driver.htm
10. Touchscreen Calibration
To do touchscreen calibration, run HIDeGalaxTouch Tool.
To do an advanced calibration, go to [Advanced] \ [Linearization], and choose from 9
Points or 25 Points Calibration.
/