meitav-tec ETN-41-P Owner's manual

  • Hello! I've reviewed the Operating Manual for the Meitav-tec ETN-41-P thermostat. This manual describes how to turn the device on and off, set the temperature, and use the timer feature. I am ready to answer your questions based on this operating manual.
  • How to turn on the thermostat?
    How to set the temperature?
    How to use the timer?
    What happens to the timer after power loss?
File: ETN-41-P
Rev. 1 Date: 12/1/2009
Meitav-tec Ltd (Contel group)
Tel: +972 (3) 962 6462 Fax: +972 (3) 962 6620
www.meitavtec.com - [email protected]
ETN-41-P
Operating Manual
ON
Press the ON button to activate the thermostat.
The word "ON" will appear on display.
OFF
Press the OFF button to deactivate the thermostat.
The word “OFF" will appear on display.
Set Temperature
Press the “+” or “-” buttons – the set temperature will appear.
Adjust the set temperature using the “+” or “-” buttons.
On/Off Timer
The timer is used to set in how many hours the thermostat will turn ON or OFF.
If the thermostat is currently ON, adjust in how many hours until it will turn OFF.
If the thermostat is currently OFF, adjust in how many hours until it will turn ON.
Press the TIMER button – AUX and the number of hours will flash on display.
Adjust the number of hours using the “+” or “-” buttons.
Change the number of hours to “0” to disable the timer function.
*Press the TIMER button again to cancel the timer.
*After an electrical power interruption the word “AUX” will flash and the timer will be canceled.
/