2. Siemens
  3. FHA2041-R1 Enclosure Cover

Siemens FHA2041-R1 Enclosure Cover User manual

  • Hello! I've reviewed the installation instructions for the Siemens FHA2041-R1 enclosure cover and FHB2005-R1 backbox. This document details how to properly install the cover, which is designed for indoor use to protect ventilation holes in the backbox. I'm familiar with the compatibility, installation process and specifications outlined within and am ready to help answer your specific questions about these devices.
  • What is the FHA2041-R1 enclosure cover used for?
    Is the FHA2041-R1 enclosure cover suitable for outdoor use?
    What color is the FHA2041-R1 enclosure cover?
    Which backbox is the FHA2041-R1 enclosure cover compatible with?
Siemens Industry, Inc.
Building Technologies Division
Florham Park, NJ
A6V10370383 _en--a
INSTALLATION INSTRUCTIONS
Model FHA2041-R1
Enclosure Cover for Model FHB2005-R1 Backboxes
The Model FHA2041-R1 enclosure cover from Siemens Industry, Inc., is used in the Desigo FV2025/2050
and Cerberus PRO FV922/924 systems as a protective cover over the ventilation holes in the top of the
FHB2005-R1 backbox to meet code requirements restricting openings at the top of the enclosure.
NOTES
1. The FHA2041-R1 enclosure cover is designed for indoor use only in dry, protected environments.
2. The “R1” extension to the Desigo and Cerberus PRO part numbers identifies the paint color and
sales channel through which the part is marketed.
The “R” in the part number extension designates parts painted red to meet local code
requirements. The numeral following the color designation identifies the sales channels for the
part, as follows:
a. 1: All channels
b. 2: Desigo
c. 3: Cerberus PRO
S
Figure 1
Typical Enclosure Cover Installation
FHA2041-R1 ENCLOSURE COVER
FHB2005-R1
BACKBOX
SCREW HOLE (ON
BOTH SIDES OF
BACKBOX)
MOUNTING SLOT
(ON BOTH SIDES OF
COVER)
#6-32 x ⅜" SCREW
#6-32 x ⅜"
SCREW
firealarmresources.com
2
INSTALLATION
1. Refer to Figure 1, insert the two #6-32 x ⅜" screws (provided) into the backbox as shown. Do not
tighten.
2. Align the enclosure cover mounting slots over the screws inserted in step 1 and lower the
enclosure cover into position. Tighten the screws.
COMPATIBILITY
The FHA2041- R1 enclosure cover can only be used with the FHB2005-R1 backbox.
SUPPLIED WITH PART
(Qty 2) #6-32 x ⅜" round-head screws
SPECIFICATIONS
Physical dimensions 213/16” L x 21/4” D x 19/16” H
Weight 1/2 lbs
Material 16 GA. (.063) aluminum
Finish Undercoating: Phosphate treatment
Paint: Polyester powder coating
Color: RAL3020 Red
firealarmresources.com
/