AireRyder LK38354BBZ Installation guide

Category
Household fans
Type
Installation guide

AireRyder LK38354BBZ

The AireRyder LK38354BBZ is a versatile lighting fixture that can be installed as either a chandelier or a light kit. It features two pull chains, one for controlling the lights and one for controlling the fan (not included). The fixture comes with a switch box cover, nipple, lamp shade, socket tube, lamp holder, and wire nuts. The maximum allowed wattage for the bulbs is specified on the relamping label located at the socket area or on the packaging.

As a chandelier:

  • The LK38354BBZ can be mounted to an outlet box using the included mounting strap and screws.
  • The fixture wire and fixture grounding wire should be threaded through the chain links and connected to the outlet wires and house grounding wire using wire nuts.

AireRyder LK38354BBZ

The AireRyder LK38354BBZ is a versatile lighting fixture that can be installed as either a chandelier or a light kit. It features two pull chains, one for controlling the lights and one for controlling the fan (not included). The fixture comes with a switch box cover, nipple, lamp shade, socket tube, lamp holder, and wire nuts. The maximum allowed wattage for the bulbs is specified on the relamping label located at the socket area or on the packaging.

As a chandelier:

  • The LK38354BBZ can be mounted to an outlet box using the included mounting strap and screws.
  • The fixture wire and fixture grounding wire should be threaded through the chain links and connected to the outlet wires and house grounding wire using wire nuts.
Fig.1
Motor
Switch Box
White Wire
Ridged Wire
Hex Nut
Screw
Switch Box Cover
Nipple
Light Kit
Wire Nut
Smooth Wire
Washer
Center Plug
Black(Blue Wire)
Fig.2
Motor
lamp Holder
Lamp Shade
Socket Tube
Pull Chain
For Light Kit:
LK38354 --- Page 1
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. The combined weight of your ceiling fan and light kit cannot exceed 35 pounds unless
additional support is provided for the fan.
LK38354
070423
TM
1. Remove the switch box cover from the switch box of the fan by loosing the three screws.
2. Unscrew the center plug from the switch box cover and discard it.
3. Thread the wires through the switch box cover, washer and hex nut, then attach the nipple
of the light kit to the hole of the switch box cover and secure it with the washer and hex nut.
4. Pull out the wires from the switch box. Make wire connections using the wire nuts:
---The smooth (marked) wire from the light kit to the black or blue wire from the fan.
---The ridged (unmarked) wire from the light kit to the white wire from the fan.
---Carefully tuck the wires back into the switch box cover.
5. Restore the switch box cover back to the switch box using the three screws.
6. Put the lamp shade on the socket tube. (See Fig.2)
7. Install bulbs (not included). See relamping label at socket area or packaging for maximum
allowed wattage.
8. Turn on the power at the main fuse or circuit breaker box.
(You can control the lights with the pull chain.)
For Chandelier:
Loop
Fixture Wire
Chain
Nipple(-a)
Fixture Grounding Wire
Collar
Top Loop
Canopy
Mounting Screw
Mounting Strap
Green Grounding Screw
Hex Nut
Wire Nut
Washer
Outlet Box
Loop Lock
Loop Lock
House Grounding Wire
Light Kit
Lamp Holder
Lamp Shade
Pull Chain
1. Attach nipple(-a) to the mounting strap, then secure it with a
washer and hex nut.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
3. Take out the cap from the hardware package for the chandelier.
4. Thread the fixture wire through the cap, washer, grounding pad
and loop. Then attach the cap onto the light kit by inserting
nipple(-b) and secure it with the washer, grounding pad and
loop. (See Fig.3 & Fig.4)
5. Choose the length of the chain you need, then weave the fixture
wire and the fixture grounding wire through the chain links.
Connect one end of the chain with the loop using a loop lock.
6. Secure the top loop to nipple(-a).
7. Thread the fixture wire and fixture grounding wire through the
collar, canopy, top loop, nipple(-a) and mounting strap.
8. Connect the other end of the chain with the top loop using
the other loop lock.
9. Pull out the outlet wires and the house grounding wire
from the outlet box. Make wire connections using the
wire nuts:
---The smooth wire (marked) from fixture to black
wire from power source.
---The ridged wire (unmarked) from fixture to
white wire from power source.
---Attach the fixture grounding wire to the mounting
strap with the green grounding screw. Then connect
it to the house grounding wire with a wire nut.
Carefully tuck the wires back into the outlet box.
10. Attach the canopy to the mounting strap by inserting the top loop and secure it with the collar.
11.
Put the lamp shade on the socket tube.
12. Install bulbs (not included). See relamping label at socket area or packaging for maximum
allowed wattage.
13. Turn on the power at the main fuse or circuit breaker box.
(You can control the lights with the pull chain.)
Loop
Grounding Pad
Washer
Nipple(-b)
Light Kit
Fig.3
Light Kit
Loop
Fig.4
LK38354--- Page 2
070423
TM
Socket Tube
  • Page 1 1
  • Page 2 2

AireRyder LK38354BBZ Installation guide

Category
Household fans
Type
Installation guide

AireRyder LK38354BBZ

The AireRyder LK38354BBZ is a versatile lighting fixture that can be installed as either a chandelier or a light kit. It features two pull chains, one for controlling the lights and one for controlling the fan (not included). The fixture comes with a switch box cover, nipple, lamp shade, socket tube, lamp holder, and wire nuts. The maximum allowed wattage for the bulbs is specified on the relamping label located at the socket area or on the packaging.

As a chandelier:

  • The LK38354BBZ can be mounted to an outlet box using the included mounting strap and screws.
  • The fixture wire and fixture grounding wire should be threaded through the chain links and connected to the outlet wires and house grounding wire using wire nuts.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI