VTech LS6117 User manual

User’s manual

w w w . v t e c h p h o n e s . c o m

Models:

LS6117/

LS6117-15/

LS6117-19

i

Congratulations

on purchasing your new VTech product.

Before using this telephone, please read the

Important safety instructions

on page 34 of this manual.

This manual has all the feature operations and troubleshooting necessary

to install and operate your new VTech telephone. Please review this manual

thoroughly to ensure proper installation and operation of this innovative and

feature rich VTech product. For support, shopping, and everything new at

VTech, visit our website at www.vtechphones.com.

In Canada, please visit www.vtechcanada.com.

The ENERGY STAR

®

program (www.energystar.gov) recognizes and encourages

the use of products that save energy and help protect our environment. We are

proud to mark this product with the ENERGY STAR

®

label indicating it meets the

latest energy efficiency guidelines.

www.vtechphones.com

Table of contents

ii

Getting started . . . . . . . . . . . . . . . . . 1

Parts checklist . . . . . . . . . . . . . . . . . . 1

Telephone base installation . . . . . . . . . . . 2

Battery installation and charging . . . . . . . . . 3

Install an image . . . . . . . . . . . . . . . . . . 5

Handset layout . . . . . . . . . . . . . . . . . . 6

Telephone base layout . . . . . . . . . . . . . . 7

Telephone settings . . . . . . . . . . . . . . . 8

Ringer volume . . . . . . . . . . . . . . . . . . 8

Ringer tone . . . . . . . . . . . . . . . . . . . . 9

Key tone . . . . . . . . . . . . . . . . . . . . . 10

Language . . . . . . . . . . . . . . . . . . . . . 10

Clear voicemail . . . . . . . . . . . . . . . . . . 11

Telephone operation . . . . . . . . . . . . . . 12

Make a call . . . . . . . . . . . . . . . . . . . . 12

Answer a call . . . . . . . . . . . . . . . . . . . 12

End a call . . . . . . . . . . . . . . . . . . . . . 12

Mute . . . . . . . . . . . . . . . . . . . . . . . 12

Ringer mute. . . . . . . . . . . . . . . . . . . . 13

Call waiting . . . . . . . . . . . . . . . . . . . . 13

Volume . . . . . . . . . . . . . . . . . . . . . . 13

Find handset . . . . . . . . . . . . . . . . . . . 13

Chain dialing . . . . . . . . . . . . . . . . . . . 14

Directory . . . . . . . . . . . . . . . . . . . . . 15

Store a directory entry . . . . . . . . . . . . . . 16

Character chart . . . . . . . . . . . . . . . . . . 17

Search the directory . . . . . . . . . . . . . . . 18

Dial a directory entry . . . . . . . . . . . . . . . 18

Edit a directory entry . . . . . . . . . . . . . . . 19

Delete from the directory . . . . . . . . . . . . . 20

About caller ID . . . . . . . . . . . . . . . . . . 21

Call log . . . . . . . . . . . . . . . . . . . . . . 22

Review the call log . . . . . . . . . . . . . . . . 23

Make a call log entry ready to dial . . . . . . . . 24

Dial a call log entry . . . . . . . . . . . . . . . . 24

Save an entry to the directory . . . . . . . . . . 25

Delete from the call log . . . . . . . . . . . . . . 26

Call log display screen messages . . . . . . . . 27

Redial list . . . . . . . . . . . . . . . . . . . . . 28

Dial a redial entry . . . . . . . . . . . . . . . . . 28

Delete from redial. . . . . . . . . . . . . . . . . 28

www.vtechphones.com

iii

Table of contents

Appendix. . . . . . . . . . . . . . . . . . . . . 29

Handset display screen messages . . . . . . . . 29

Handset and telephone base indicators . . . . . 31

Battery . . . . . . . . . . . . . . . . . . . . . . 33

Important safety instructions . . . . . . . . . . . 34

Troubleshooting. . . . . . . . . . . . . . . . . . 35

Operating range . . . . . . . . . . . . . . . . . 44

Maintenance . . . . . . . . . . . . . . . . . . . 44

About cordless telephones . . . . . . . . . . . . 45

The RBRC

®

seal . . . . . . . . . . . . . . . . . 45

Warranty . . . . . . . . . . . . . . . . . . . . . 46

FCC, ACTA and IC regulations . . . . . . . . . . 48

Technical specications . . . . . . . . . . . . . 50

Index . . . . . . . . . . . . . . . . . . . . . . . 51

www.vtechphones.com

1

Getting started

Basic operation

To purchase

a replacement

battery or power

adapter, visit our

website at www.

vtechphones.

com or call

1 (800) 595-9511.

In Canada, go to

www.vtechcanada.

com or call 1 (800)

267-7377.

•

8. User’s manual

1. Handset

Telephone base 7.

6. Telephone base

power adapter

5. Telephone line

cord

4. Battery

3. Battery compartment

cover

Parts checklist

Your telephone contains the following items. Save your sales receipt and original

packaging in the event warranty service is necessary.

Getting started

2. Transparent image

cover

9. Images

www.vtechphones.com

2

Getting started

Use only the

power adapter

supplied with this

product. To order

a replacement,

visit our website at

www.vtechphones.

com or call

1 (800) 595-9511.

In Canada, go to

www.vtechcanada.

com or call 1 (800)

267-7377.

The power adapter

is intended to be

correctly oriented

in a vertical

or oor mount

position. The

prongs are not

designed to hold

the plug in place

if it is plugged into

a ceiling or an

under-the-table/

cabinet outlet.

•

Telephone base

Telephone line cord

Electrical outlet

not controlled by

a wall switch

Telephone base

power adapter

Telephone

wall jack

DSL lter (not included)

required if you have DSL

high-speed Internet service

Telephone base installation

Install the telephone base as shown below. The telephone base is designed for

desk or tabletop use only. Make sure that the electrical outlet is not controlled

by a wall switch. If you subscribe to Digital Subscriber Line (DSL) high-speed

Internet service through your telephone line, you must have a DSL lter between

the telephone base and the telephone wall jack. The lter prevents noise and

caller ID problems caused by DSL interference. Please contact your DSL service

provider for more information about DSL lters.

Cord slot

www.vtechphones.com

3

Getting started

Basic operation

Getting started

If the handset

will not be used

for a long time,

disconnect and

remove the battery

to prevent possible

leakage.

To purchase a

replacement

battery, visit our

website at www.

vtechphones.

com or call

1 (800) 595-9511.

In Canada, go to

www.vtechcanada.

com or call

1 (800) 267-7377.

•

Battery installation and charging

Perform steps 2 through 5 if the transparent image cover

is attached. If the transparent image cover is off, go to

step 6.

Remove the transparent image cover by holding the

handset in your right hand with the back facing up and the

CHARGE light to the left as shown in Figure 1.

Push the top center of the transparent image cover to the

right with your left thumb until it unlocks.

Lift the transparent image cover away from the handset.

Remove the battery compartment cover by sliding it to the

right as shown in Figure 2.

Match the color of the battery wires to the color-coded label

located inside the handset compartment on the back of the

handset, as shown in Figure 3.

Insert the battery plug securely onto the connector.

Place the battery in the compartment with the label

THIS SIDE UP facing up and the wires inside the battery

compartment as shown in Figure 4.

Replace the battery compartment cover by aligning the

battery cover tabs with the slots in the battery compartment

and sliding the cover towards the CHARGE light until it

clicks into place.

1.

2.

3.

4.

5.

6.

7.

8.

9.

Figure 1:

Remove image cover

Figure 2:

Remove battery

compartment cover

Figure 3:

Insert battery plug

Figure 4:

Insert battery

CHARGE light

www.vtechphones.com

4

Getting started

If you wish to add an image to the transparent image

cover, go to Install an image on page 5.

Replace the transparent image cover by placing it

at against the handset and sliding it towards the

CHARGE light until it clicks into place as shown in

Figure 5.

Charge the handset by placing it in the telephone

base. The handset charge light will be on when

correctly placed in the telephone base.

Caution:

If the charge light does not come on, remove the handset

from the telephone base and make sure that the transparent

image cover is on correctly. The cover must click into place

to be seated properly.

The battery may have enough charge for short calls. For

best performance, charge the handset for at least 16 hours.

When the battery power is low, the handset will beep;

LOW BATTERY will be displayed and will ash on the

handset screen. Place the handset in the telephone base

to charge the battery when not in use. When fully charged,

the handset battery provides approximately eight hours of

talk time or four and a half days of standby time.

10.

11.

12.

Figure 5:

Replace transparent

image cover

The handset

battery will charge

if you place the

handset in the

telephone base

with either the

front or back

facing out to show

off the insert as

shown in Figure 6.

•

OR

Figure 6:

Handset charging

positions

CHARGE light

www.vtechphones.com

5

Getting started

Basic operation

Getting started

Install an image

Perform steps 2 through 9 of the Battery installation and

charging procedure on page 3.

Use the enclosed template to cut the desired image so

that it ts into the transparent image cover.

Place the selected image inside the transparent image cover.

Place the image face down inside the transparent image cover

with the top of the image at the end with the large tab.

Replace the transparent image cover by placing it at

against the handset and sliding it towards the CHARGE

light until it clicks into place as shown in the gure.

Charge the handset by placing it in the telephone base.

The handset CHARGE light will be on when correctly

placed in the telephone base.

1.

2.

3.

4.

5.

6.

You can also go

www.vtechphones.

com and use

the online tool to

create your own

custom graphic

inserts.

•

www.vtechphones.com

6

Handset layout

Getting started

CID (Caller ID)

• Press to review the call log when the phone is

not in use.

While in the menu, press to scroll down.

Press to lower the listening volume during

a call.

•

/FLASH

• Press to make or answer a call.

• During a call, press to answer a second call

when you hear a call waiting alert.

(Directory)

• Press to display the directory when the phone

is not in use.

While in the menu, press to scroll up.

Press to raise the listening volume during a call.

•

MENU/SELECT

• Press to display the menu.

• When in the menu, press to select an item, or

save an entry or setting.

OFF/CLEAR

• During a call, press to hang up.

• While the handset is ringing, press to silence

the ringer.

•

Press and hold when the phone is not in use to

erase the MISSED CALLS display.

• During programming, press to return to the

previous menu without making changes.

REDIAL/PAUSE

• Press

to review the redial list.

• While dialing or entering numbers into the

directory, press and hold to insert a dialing

pause.

CHARGE light

• On when the handset is charging in the telephone

base.

#

• Press repeatedly to display other dialing options

when reviewing the call log.

REMOVE

• While reviewing the call log, press to delete an

individual entry, or press and hold to delete the

entire call log.

•

Press to delete digits when predialing (entering the

phone number before pressing /FLASH).

MUTE

•

While on a call, press to mute the microphone.

Handset layout

www.vtechphones.com

7

Getting started

Basic operation

Getting started

Telephone base layout

FIND HANDSET

Press to page the handset.•

IN USE light

Flashes when there is an incoming

call or another telephone on the same

line is in use.

On when the handset is in use.

•

VOICEMAIL light

Flashes when there is new voicemail

from your local telephone company.

•

www.vtechphones.com

8

Telephone settings

Ringer volume

You can change the handset ringer volume to a comfortable

level. The ringer can also be turned off so the telephone does

not ring when there are incoming calls.

To adjust the ringer volume:

Press MENU/SELECT to display the menu when the

handset is not in use.

Press or to select

>

RINGER VOLUME, then press

MENU/SELECT.

Press or to adjust the volume. A sample of each volume

level will be played as you adjust it.

Press MENU/SELECT to save your selection. You will

hear a conrmation tone.

1.

2.

3.

4.

RINGER VOLUME

>RINGER VOLUME

RINGER TONE

The ringer

volume will be off

if the volume is

set to the lowest

level, and a ringer

off icon will be

displayed.

•

www.vtechphones.com

9

Basic operation

Telephone settings

If the ringer

volume is turned

off while scrolling

through the

options in the

RINGER TONE

menu, the sample

of the ringer will

not be heard.

•

RINGER TONE

1

>RINGER TONE

KEY TONE

Ringer tone

This menu allows you to choose from different ringer

tones.

To choose a ringer tone:

Press MENU/SELECT to display the menu when the

handset is not in use.

Press or to select

>

RINGER TONE, then press

MENU/SELECT.

Press or to select the desired ringer tone. A sample

of each ringer tone will be played when scrolling through

the choices.

Press MENU/SELECT to save your selection. You will

hear a conrmation tone.

1.

2.

3.

4.

www.vtechphones.com

10

Telephone settings

>KEY TONE

LANGUAGE

Key tone

The handset beeps as you press keys. You may turn the key

tone feature on or off. To change the setting:

Press MENU/SELECT to display the menu when the

handset is not in use.

Press or to select

>

KEY TONE, then press

MENU/SELECT.

Press or to choose ON or OFF.

Press MENU/SELECT to save your selection. You will

hear a conrmation tone.

Language

You can select ENGLISH, FRANÇAIS or ESPAÑOL to be

used for the handset display. To change the setting:

Press MENU/SELECT to display the menu when the

handset is not in use.

Press or to select

>

LANGUAGE, then press

MENU/SELECT.

Press or to select the desired language.

Press MENU/SELECT to save your selection. You will

hear a conrmation tone.

1.

2.

3.

4.

1.

2.

3.

4.

KEY TONE

ON

LANGUAGE

ENGLISH

>LANGUAGE

CLR VOICE MAIL

www.vtechphones.com

11

Basic operation

Telephone settings

>CLR VOICE MAIL

DIRECTORY

TURN INDICATOR

OFF?

Clear voice mail

If you subscribe to voicemail service provided by your local telephone company,

NEW VOICE MAIL and will appear on the handset, and the VOICEMAIL light

on the telephone base will ash when you have new voicemail messages. Please

contact your local telephone company for more information about voicemail

service.

After you have listened to all new voicemail messages, the indicators on both the

handset and telephone base will be turned off automatically.

To manually turn off these indicators:

Press MENU/SELECT to display the menu when the

handset is not in use.

Press or to select

>

CLR VOICE MAIL, then press

MENU/SELECT.

The screen displays TURN INDICATOR OFF?

Press MENU/SELECT to conrm your selection. You will

hear a conrmation tone.

Clearing the VMWI (visual message waiting indication) only turns off the indicators;

it does not delete voicemail message(s). Use this feature if the telephone indicates

there is voicemail when you have none, or if you have accessed your voicemail

from a different telephone line (while away from home). If there actually are new

voicemail messages, your local telephone company will continue to send the

signals which will turn the indicators back on.

1.

2.

3.

4.

Your telephone

service provider

may alert you to

new messages

with a stutter

(broken) dial tone.

Contact your

service provider

for details.

•

www.vtechphones.com

12

Telephone operation

Make a call

Press /FLASH.

Dial the number.

-OR-

Dial the number.

Press /FLASH.

Answer a call

Press /FLASH or any of the dialing keys (0-9, #,

*

).

End a call

Press OFF/CLEAR, or put the handset in the telephone base.

Mute

The mute feature allows you to hear the other party while the

other party cannot hear you.

During a call, press MUTE on the handset. MUTED will

be temporarily displayed on the screen, along with the

smaller MUTE icon.

Press MUTE again to resume the conversation.

MICROPHONE ON will be temporarily displayed on the

screen.

1.

2.

1.

2.

•

1.

2.

The screen

displays the

elapsed time as

you talk (in hours,

minutes and

seconds).

When predialing

(entering the

phone number

before pressing

/FLASH),

press REMOVE

or OFF/CLEAR

to backspace and

delete;

press and hold

REDIAL/PAUSE

to insert a dialing

pause.

•

PHONE 0:00:00

MUTE

PHONE 0:00:00

MUTED

MUTE

www.vtechphones.com

13

Basic operation

Telephone operation

RINGER MUTE

Ringer mute

You can mute the ringer temporarily when the telephone is

ringing.

Press OFF/CLEAR or MUTE to temporarily silence the

ringer. The next call will ring normally.

Call waiting

If you subscribe to call waiting service from your telephone

company, you will hear an alert tone if there is an incoming

call while you’re on another call. Press /FLASH to answer

the new incoming call. Press /FLASH again to return to

the original call.

Volume

During a call, press or CID to adjust the listening volume

to a comfortable level.

Find handset

This feature allows the telephone base to page the handset.

Press FIND HANDSET on the telephone base. The

handset will ring and its screen displays

**

PAGING

**

.

Press FIND HANDSET again on the telephone base to

stop paging, or press /FLASH or any dialing keys (0-9,

#,

*

) on the handset.

•

1.

2.

** PAGING **

www.vtechphones.com

14

Telephone operation

Chain dialing

This feature allows you to dial numbers stored in the directory, call log or redial

list while you are on a call.

To dial a number in the directory:

Press MENU/SELECT twice to enter the directory menu.

Scroll by pressing or to nd the desired entry.

Press MENU/SELECT to dial the desired number when it is displayed.

To dial a number in the call log:

Press MENU/SELECT and then press to select

>

CALL LOG.

Press MENU/SELECT to conrm.

Scroll by pressing or to nd the desired entry.

Press MENU/SELECT to dial the desired number when it is displayed.

To dial the last number in the redial list:

Press REDIAL/PAUSE to dial.

Press REDIAL/PAUSE again within two seconds to cancel the chain dialing.

1.

2.

3.

1.

2.

3.

4.

•

Chain dialing

can be useful

if you wish to

store numbers

other than phone

numbers (such

as bank account

information or

access codes) in

the directory.

•

www.vtechphones.com

15

Basic operation

Telephone operation

VTech LS6117 User manual

VTech LS6117 User manual

Related papers

Other documents