The Metal Man FC125 is a 115-volt input, 125-amp AC output
flux-core-only wire feed welder. Economical and easy to use, it
requires no shielding gas and welds 8 gauge to 3/16" mild steel ma-
terials with .030" or .035" flux core wires on 4" or 8" spools. Fea-
tures include 2 voltage ranges, set up chart, cooling fan, trigger acti-
vated arc, overload protection, 6-foot MIG gun with Tweco style
series 11 replacement parts and 6-foot ground cable and clamp.
Specifications include 27V no load voltage, 60-125 amps output,
20% duty cycle at 80A, and a weight of about 38 lbs. Includes extra
contact tips and 8" spool adapter.
Order Part Number: FC125
SPECIFICATIONS
115V 20 Amp 60 Hz Input Power
No Load Voltage 27V
Output Range 60 to 125A AC
20% Duty Cycle @ 80A
6-1/2 Ft Torch
6-1/2 Ft Ground Cable and Clamp
1 year warranty
DESCRIPTION
®
METAL MAN
WORK GEAR
Flux Core 125
Infinite Wire Feed
Speed Control
www.metalmangear.com
®
METAL MAN
WORK GEAR
Metal Man Work Gear Co
1760 Prospect Ct Ste 120
Appleton, WI 54914
888-762-4045
Like Us on Facebook
6-1/2 Foot
Torch
6-1/2 Foot
Ground Cable
Two Voltage
Ranges
/
