Unbranded 10103 Installation guide

The Doc-Box® Mounting Instructions

MOUNTING INSTRUCTIONS

It is recommended that the Doc-Box® be mounted level and perpendicular to the ground on a sturdy 4” x 4” post

employing the included hardware and mounting holes, with suggested above ground height of 5’-9”, In order for

the lid to open correctly, the top of the mounting post should fit under the “post stop guide” on the back of the

Doc-Box® so that the post doesn’t interfere with the back of the lid when opened. The Doc-Box® will protect its

contents from all weather when kept closed and posted correctly, incorrect posting near sprinklers, units

mounted on leaning posts, or units left lying on the ground may comprise contents.

HOW TO CLOSE THE DOC-BOX® LID

Close the lid down, apply pressure to the two formed ridges at the bottom of the box then apply pressure until it

snaps shut. You will hear it snap shut! This guarantees the protection of your documents

CLEANING AND CARE

The Doc-Box® is made of a rugged material called (HDPE), and will withstand most abuse. The Doc-Box® should

only be written on with a grease pencil (also called a china marker) and can be cleaned with light oil solvent (such

as WD-40®) for next use or periodically cleaned with any household spray cleaner.

DAMAGE

IMPORTANT!!!

Upon receiving The Doc-Box® order, remove the unit(s) from its carton(s) and inspect for damage

which may have occurred during shipment. If damage is found, immediately notify the shipping company, within

three business days.

www.docbox.com