304 Andrea Dr., Belgrade, MT 59714 USA
Tel: 406-388-1377 or fax: 406-388-2063
web site: www.optechusa.com
System Connectors
™
– Lens Support Adaptor
Supports and stabilizes
longer lenses
when used
with a
strap.
Can also be used
with OP/TECH USA's
Hood Hat
™
(sold separately)
2. Carefully thread the end of the clip though a seamed webbing area (a) on an OP/TECH USA
strap, a photo vest or backpack as shown. Close the clip making sure that it is locked securely.
The Lens Support Adaptor can be quickly disconnected from the strap when not in use by
simply unfastening the two quick disconnects (b).
4. To use the Lens Support Adaptor with an OP/TECH USA Hood Hat™, remove the self-gripping
fastener as shown (a-c). The Hood Hat™ can be clipped to the adaptor in its place (d).
3. Wrap the first end of the self-gripping fastener around the lens barrel as shown (a). Hold it in
place and overlap the second end around the lens to secure it (b).
(a) triglides
continued on reverse side
(b)
(a)
(b)
(a)
(d)(c)(b)(a)
1. Begin by laying out the Lens Support Adaptor as shown with triglides (a) facing up. The two
support straps form a natural "V" to determine the correct sides to connect the clips to your
camera strap, photo vest or backpack.
adaptor
02029215 - Rev 09-08
304 Andrea Dr., Belgrade, MT 59714 USA
Tel: 406-388-1377 or fax: 406-388-2063
web site: www.optechusa.com
System Connectors
™
– Lens Support Adaptor
Supports and stabilizes
longer lenses
when used
with a
strap.
Can also be used
with OP/TECH USA's
Hood Hat
™
(sold separately)
2. Carefully thread the end of the clip though a seamed webbing area (a) on an OP/TECH USA
strap, a photo vest or backpack as shown. Close the clip making sure that it is locked securely.
The Lens Support Adaptor can be quickly disconnected from the strap when not in use by
simply unfastening the two quick disconnects (b).
4. To use the Lens Support Adaptor with an OP/TECH USA Hood Hat™, remove the self-gripping
fastener as shown (a-c). The Hood Hat™ can be clipped to the adaptor in its place (d).
3. Wrap the first end of the self-gripping fastener around the lens barrel as shown (a). Hold it in
place and overlap the second end around the lens to secure it (b).
(a) triglides
continued on reverse side
(b)
(a)
(b)
(a)
(d)(c)(b)(a)
1. Begin by laying out the Lens Support Adaptor as shown with triglides (a) facing up. The two
support straps form a natural "V" to determine the correct sides to connect the clips to your
camera strap, photo vest or backpack.
adaptor
02029215 - Rev 09-08
nnnnnnnnnn
nnnnnnnnnn
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Neotech 5401172 User manual
-
Porsche ISOfix Operating Instructions Manual
-
-
Croozer Baby Seat Kid / Kid Plus 2016/2017 Owner's manual
-
Kata SB-902 User manual
-
Barska Optics Catalog 2021 Owner's manual
-
Tiffen Camera Bag User manual
-
-
Sea Eagle PF7-DELUXE Operating instructions
-
Croozer Kid for 2 Owner's manual
