makitatools.com
14'' MM4
™
4-STROKE
POWER CUTTER
INCREASED PERFORMANCE.
5-Stage filtration system for
better engine durability
DURABILITY
Fuel primer bulb for easier
cold starts
PERFORMANCE
Integrated wheel kit retracts
when not in use
CONVENIENCE
Pressure compensated carburetor
for reduced flooding
INNOVATION
THE 4-STROKE ADVANTAGE
• NoOilMixingSimpliesOperationandPreventsEngineFailureDueto
ImproperMix
• EliminatestheNeedforSeparateMixedOil/FuelCan
• LowerNoiseat106.5dB(A)andSmootherIdleforContinuousOperation
• LowerFuelConsumptionat.45GallonsPerHour
• ReducedExhaustandIntakeCarbonBuild-UpforLongerCylinderLife
• ThreeRingPistonforImprovedCommercialEngineDurability
DIAMOND
BLADE
OPTIONAL
Model
EK7651H
14'' MM4
™
4-STROKE POWER CUTTER
Model EK7651H
FEATURES&BENEFITS
n Automatic engine decompression valve is engineered
into the cam gear to reduce pull start force by 40%
n
Five-stage, foam-paper-nylon filtration system with
advance direction air flow provides cleaner air for better
engine durability
n
Integrated wheels reduce fatigue during long straight cuts
and retract when not in use to prevent unexpected
movement
n
Clear primer bulb facilitates fuel delivery to the carburetor
for easier cold starts
n
Pressure compensated carburetor with vented choke
plate is engineered to reduce flooding by automatically
adjusting to deliver the proper amount of fuel
n
Advanced oil separation & lubrication system to improve
valve train durability and engine life
n
Specially treated rods, followers and valves minimize wear
and extend engine life
n
Single lever On-Off-Choke operation switch for operator
convenience
n
Shielded exhaust outlet and larger spark arrestor screen
prevents contaminates from restricting air flow
n
External fuel tank vent eliminates pressure build up
n
Sealed cartridge recoil starter rope reduces wear by
keeping out dust and debris
n
Cutting arm easily changes from center position to flush
(outboard) position allowing cuts directly adjacent to curb
edges, wall or directly above the ground
n
Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort
STANDARDEQUIPMENT
n Wrench (782236-0)
n
Torx Wrench (782025-3)
n
Screwdriver (783012-5)
n
Adapter ring (20 mm to 1") (394-228-121)
n
Tool kit (195488-8)
n
Oil bottle (7.44 oz.) (195532-1)
n
Water supply kit (195533-9)
SPECIFICATIONS
Engine displacement 4.6 cu.in. (76 cc.)
Maximum power 4.1 HP / 3.0kW
No load speed 9,350 RPM
Max spindle speed 4,300 RPM
Fuel Unleaded gasoline
Fuel tank capacity 37 oz.
Arbor 20mm/1'' Adapter
Wheel diameter 14"
Maximum cutting depth 4-13/16"
Dry weight 28.4 lbs.
Shipping weight 35.2 lbs.
UPC code 088381-620017
Makita U.S.A., 14930 Northam St., La Mirada, CA 90638
Makita offers a wide variety of POWER CUTTER accessories. For a complete listing, please refer
to the Makita General Catalog or visit our website at makitatools.com, or call 1-800-4MAKITA.
All specifications subject to change without prior notice. All models and accessories subject to stock on hand.
NTF-0713 MA-1936-13
088381 6200
17
Model EK7651H
“The Makita Teal color is the registered trade dress of Makita Corporation.”
DIAMOND BLADE OPTIONAL
OPTIONAL ACCESSORIES
SPECIFICATIONS
Wheel Diameter 4 1/2" - 5"
Battery 18V LXT
®
Lithium-Ion
No Load Speed 8,500 RPM
Spindle Thread 5/8" - 11 UNC
Lock-On Yes
Lock-Off No
Grinder Switch Type Body grip/slide
Overall Length 14-1/4"
Net Weight (with battery) 5.8 lbs.
UPC Code (XAG04T) 088381-848220
UPC Code (XAG04Z) 088381-684613
18V LXT
®
Lithium-Ion Brushless Cordless
4-1/2" / 5" Cut-Off/Angle Grinder Kit (5.0Ah)
Model XAG04T
n The BL
™
Brushless Motor eliminates carbon brushes, enabling the BL
™
Motor to run cooler and more efficiently for longer life
n Efficient BL
™
Brushless motor is electronically controlled to optimize battery
energy use for up to 50% longer run time per charge
n The electronically-controlled BL
™
Brushless Motor efficiently uses energy
to match torque and RPM to the changing demands of the application
n Weighs only 5.6 lbs. with battery for reduced operator fatigue
n Rubberized soft grip provides increased comfort on the job
n Slide switch with lock-on for operator convenience
n Soft start suppresses start-up reaction for smooth start-ups and longer gear life
XAG04T
n (2) 18V LXT
®
Lithium-Ion 5.0Ah Battery (BL1850B)
n 18V LXT
®
Lithium-Ion Rapid Optimum Charger (DC18RC)
n 5" X 1/4" X 7/8" Inox Grinding Wheel, 36 Grit (A-95962)
n
5" Ultra Thin Cut-Off Wheel, Stainless (B-46165)
n 5" Tool-Less Wheel Guard (123145-8)
n 5" Cut-Off Wheel Guard (122911-0)
n Side Handle
n Tool Bag
XAG04Z
n 5" X 1/4" X 7/8" Inox Grinding Wheel,
36 Grit (A-95962)
n
5" Ultra Thin Cut-Off Wheel, Stainless (B-46165)
n 5" Tool-Less Wheel Guard (123145-8)
n 5" Cut-Off Wheel Guard (122911-0)
n Side Handle
ERGONOMICS
Compact and ergonomic design at
only 14-1/4” long
CONVENIENCE
3-stage L.E.D. gauge indicates
battery charge level
POWER
BL™ Brushless motor delivers
8,500 RPM
INNOVATION
Automatic Speed Change™
technology adjusts speed and
torque during operation for
optimum performance
BL
™
Brushless Motor Delivers 8,500 RPM
FEATURES
STANDARD EQUIPMENT
makitatools.com
Makita offers a wide variety of accessories. For a complete listing, please refer to the
Makita General Catalog or visit our website at makitatools.com, or call 1-800-4MAKITA.
All specifications subject to change without prior notice. All models and accessories subject to stock on hand.
The Makita Teal Color is the trade dress of Makita Corporation and is protected under common law and registered with the U.S. Patent and Trademark Office
NTF-0317 MA-2818-17
Makita U.S.A., 14930 Northam St., La Mirada, CA 90638
Also Available as a Bare Tool
Model XAG04Z
n 18V LXT
®
Lithium-Ion 3.0Ah Battery (BL1830B)
n 18V LXT
®
Lithium-Ion 4.0Ah Battery (BL1840B)
n 18V LXT
®
Lithium-Ion Dual Port Rapid Optimum
Charger (DC18RD)
n 18V LXT
®
Lithium-Ion 4-Port Charger (DC18SF)
/
