2. Toro
  3. Light Kit, GrandStand Mower

Toro Light Kit, GrandStand Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Light Kit, GrandStand Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3373-815RevA
LightKit
GrandStand
®
Mower
ModelNo.114-3505
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
Bracket2
1
Bolt(3/8x1inch)(selftapping)
4
Installthebrackets.
Rightlight1
Leftlight(hasbuttonswitch)
1
Locknut(5/16inch)
2
Wireharness1
Fuse(15amp)
1
Convolutedtube
2
Plastictie8
Frictionwasher2
2
Y-Adapter1
Installthelights.
1
InstallingtheBrackets
Partsneededforthisprocedure:
2Bracket
4
Bolt(3/8x1inch)(selftapping)
Procedure
1.Stoptheengine,settheparkingbrake,andremovethe
keyfromtheignitionswitch(Figure1).
2.Removethenegative(-)batterycablefromthebattery.
3.Installthe2bracketstothesideofthemachinewith4
bolts(3/8x1inch).
Note:Thesearethread-forming(self-tapping)bolts
andtheframeholesdonotrequiretapping.
Figure1
1.Self-tappingbolt(3/8x1
inch)
3.Controllevers
2.Bracket
©2012—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
*3373-815*A
2
InstallingtheLights
Partsneededforthisprocedure:
1Rightlight
1
Leftlight(hasbuttonswitch)
2
Locknut(5/16inch)
1Wireharness
1
Fuse(15amp)
2
Convolutedtube
8Plastictie
2Frictionwasher
1Y-Adapter
Procedure
1.Installtheconvolutedtubeontotheexposedwires
connectedtothelights.
Note:Use4plastictiesoneachendoftheconvoluted
tubetosecureittothewires(Figure3).
2.Slidethelightconnectorsintotheholesinthebrackets
(Figure2).
Figure2
1.Rightlight
3.Leftlight(hasbutton
switch)
2.Bracketinstalled
Note:Thelockwashertsinsidethefrictionwasher
andcentersthefrictionwasher.
Important:Donotovertightenthehardwarefor
thelights.Gentlytightenthenuttosecurethe
lightandtestthefrictiontomovelight.Loosenor
tightenthenuttocontrolthefrictionholdingthe
lightandallowingthelighttobeaimed.
3.Discardthe2nutsincludedwiththelights.
4.Installtheleft-handlight(withthebuttonswitch)to
theleftbracketwithalocknut(5/16inch),afriction
washer,andalockwasherandboltincludewiththe
light(
Figure3).
Note:Ensurethelightisinplacesothefrictionallows
thelighttopivotandswivel.
5.Installtherightlighttotherightbracketwithalocknut
(5/16inch),africtionwasher,andalockwasherand
boltincludedwiththelight(Figure3).
Note:Ensurethelightisinplacesothefrictionallows
thelighttopivotandswivel.
Figure3
1.Leftlight(hasbutton
switch)
6.Boltincludedwithlight
2.Locknut(5/16inch)
7.Rightlight
3.Lockwasherincludedwith
light
8.Plastictie
4.Frictionwasher
9.Convolutedtube
5.Bracketinstalled
2
6.Removethehairpincottersecuringtherearcushion
bracket(Figure4).
7.Slidethebushingnexttothemachine(Figure4).
8.Lowertherearcushionbracketontotheplatform
(Figure4).
g018322
1
2 3
1
Figure4
1.Hairpincotter3.Rearcushionbracket
2.Bushing
9.Routethelightkitwireharnessinfrontofthecontrol
cablesandnearthetractionunitwireharness.
10.Plugthewireharnessintothelights(
Figure5).
Note:Therightlighthasa2-wireconnectorand
theleftlight(withthebuttonswitch)hasa3-wire
connector.
Figure5
1.2-wireconnector3.3-wireconnector
2.Wireharness
11.Routethewireharnessdowntothefuseblock.
12.Locatetheshortconnectorbehindthefuseblockand
removetheinsulatorcapfromtheconnector.
3
13.InstalltheY-adapter.
•PlugthesingleendoftheY-adapterintotheshort
connectorbehindthefuseblock(Figure6).
•Plugthewireharnessforthelightsintotheother
endoftheY-adapter(Figure6).
•PlugthewireharnessfortheHydraulicCooling
Assembly(ifpresent)intotheY-adapter(
Figure6).
g018573
6
4
3
6
2
1
5
Figure6
1.Wireharnessforeither
theLightsortheHydraulic
SystemCoolingAssembly
4.Shortconnectorbehind
thefuseblock
2.Wireharnessforeither
theLightsortheHydraulic
SystemCoolingAssembly
5.Fusebox
3.Y-adapter6.Mainwireharness
14.Installthefuse(Figure7).
g018576
1
Figure7
1.Fuse
15.SecuretheY-adaptertothemainwireharnesswitha
wiretiesuppliedinthekit.
Note:PositiontheY-adaptersothatthefusesarein
anuprightposition(
Figure6).
16.Securethelightkitwireharnesstothetractionunit
with3plastictiessuppliedinthekit.
17.Installtherearcushion(
Figure4).
18.Installthenegative(-)batterycabletothebattery.
Operation
OperatingtheLights
Note:Thelightscanonlybeonwhentheignitionswitch
isintheRunposition.
1.WiththeignitionswitchintheRunposition,turnthe
lightsonoroffbydepressingthebuttonswitchonthe
leftlight.
2.Pivotorswivelthelightstothedesiredposition.
4
/