Label Picture Description QTY
A Sofa Seat 1
B Leg 4
Caution : You must read this before you proceed
SOFA
Picture
C
Right Back
Cushion Interior
2
E
Left Back
Cushion
1
F
Armrest
Cushion
1
G
Right Back
Cushion Covers
2
H
Armrest
Backrest
1
I Backrest 1
Label Picture Description QTY
①
Gasket 7
Before
Beginning
Assembly:
This Sofa has multiple parts and may require up to some 30
minutes to assemble. To give you an overview of the sofa
parts, the above picture is to help you put the various parts
into perspective. Please read through the instructions below to
familiarise yourself with the parts and steps before assembly.
Backrest(I)
Armrest
Backrest(H)
Armrest
Step 1
Step 2
Take out the Hermetic Bag from Sofa Seat(A) storage. Then
take out Right Back Cushion Interior(C) from Hermetic Bag.
Put each Right Back Cushion Interior(C) into Right Back
Cushion Covers(G).
Open the flap under the Sofa, then pull out the Black Bag
containing the Legs(B), and Gaskets(①). Take out the Left
Back Cushion(E),Armrest Cushion(F),Right Back Cushion
Covers(G),Armrest Backrest(H) andBackrest(I) from storage.
G
A
B
①
Step 3
Step 4
Install the first Leg(B) into the bottom of the Sofa(A) by placing
one Gasket(①) on the threaded stem.
The use of the Gasket can improve tightness and security of
Leg.
Tighten by turning the Leg clockwise.
Repeat the same step to install the three remaining Legs(B).
Note : The use of Gaskets are OPTIONAL and are
especially useful to help alleviate slight wobbles. Some
Legs may need more than one whilst some Legs do not
require any.
Insert the Armrest Backrest(H) into the Sofa Seat(A) at the
Rectangular slots pressing gently but firmly downwards until
they click into place.
Step 5
Step 6
Put Armrest Cushion(F) on Armrest Backrest(H). It can stick
Armrest Cushion(F) on Armrest Backrest(H) with velcro
(Black Color) on Armrest Backrest(H). Left Back Cushion(E)
and Right Back Cushion Covers(G) with Right Back Cushion
Interior(C) inside also put on to Backrest (I) in the same way.
The Sofa is now ready for use.
Caution: This Sofa can only be used on a flat, level surfaces.
Insert the Backrest(I) into the Sofa Seat(A) at the Rectangular
slots pressing gently but firmly downwards until they click into
place.
H
I
A
F
/
