Legrand Walkerduct/Walkerduct ProSeries Underfloor Duct Junction Box Bend Radius Control Inserts Installation guide

Model: Walkerduct/Walkerduct ProSeries Underfloor Duct Junction Box Bend Radius Control Inserts

Junction Box

Bend Radius Control Insert

INSTALLATION INSTRUCTIONS

Walker

electrical systems conform to and should

be properly grounded in compliance with require-

ments of the current National Electrical Code or

codes administered by local authorities.

All electrical products may represent a possible

shock or fire hazard if improperly installed or

used. Walker electrical products may bear the

mark as UL Listed and/or Classified and should

be installed in conformance with current local

and/or the National Electrical Code.

Walker Systems, Inc.

A Wiremold Company, Williamstown, WV 26187

1 000 262 0199

Break Off Tab As Shown

For This Locations and on

Opposite Side of Tunnel.

J2105

Peel Off Backing

and Stick

on Insert

Flip Upside Down

Pad on Bottom

Install Inserts

as Shown

Do Not Break

Off Tab for

these Inserts.

Model: Walkerduct/Walkerduct ProSeries Underfloor Duct Junction Box Bend Radius Control Inserts