idh by St. Simons 11020-08A Installation guide

idh by St. Simons
Brand
idh by St. Simons
Model
11020-08A
Type
Installation guide

This manual is also suitable for

by St. Simons, Inc.
Quality Solid Brass Decorative Hardware & Bath Accessories
“The Special Finishes Specialist”
idhbrass.com
Installation Instructions
Premium Grade Solid Brass
Extension Flush Bolt
Item# 11020
Dimensions:
Face: 1” x 6-3/4”
Rod Length: 11-3/4” with Brass Plunger
Throw: 1”
Weight: 12 oz.
Two Strikes: 2” x 1” and 2-1/4” x 1”
Dimensions are for reference use only.
For exact dimensions, please measure actual part.
Installation Instructions:
1. Mortise the inactive door to accommodate bolt and
extension rod.
2. Install flush bolt housing in the door edge using the
provided screws.
3. Thread the rods into the housing through the holes in the
top/bottom of the door.
4. If using at the top of the door: adjust bolt to be flush with
the top of the door when retracted. If using for the bottom
of the door: adjust bolt to project when retracted.
5. Install strike.
6. Hang door.
Catalog Section: A
Extension Flush Bolt
Item# 11020
Date: Rev 04/18
  • Page 1 1

idh by St. Simons 11020-08A Installation guide

idh by St. Simons
Brand
idh by St. Simons
Model
11020-08A
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents