DisplayLink 4K Plug-and-Display Certified
When you connect this DisplayLink 4K Plug-and-Display certified
adapter to a web-enabled Windows® 7, Windows® 8 or Windows® 10
computer, it automatically downloads and installs the most up-to-date
drivers for you, so you won’t have to.
Enable 4K video output from your computer system to an HDMI
television. The USB 3.0 to HDMI 4K adapter allows your system to
output 4K video even if your system is not capable of outputting Ultra
HD resolution.
Now you can add an additional 4K monitor, by simply plugging the
USB30-4K-HDMI into a USB 3.0 port
Get up and running faster, with automatic software & driver
installation on computers running Windows 10, 8, or 7 with an active
Internet connection
NOTE:
In case your operating system is older than above, please check our
website's PRODUCT PAGE and download driver for installtation.
(Website: www.nekteck.com)
Connecting the Adapter
Make sure the device (Desktop, Laptop…) is HDMI embedded or
bundled any adapter/connector with HDMI.