By that, if you are using an SSD on your Windows computer, the first thing you need to check is
the firmware version of the SSD and make sure it’s up to date.
Also, to eliminate incompatible hardware issues, remove any hardware from your computer that
you think they are the problems, especially any new hardware that you have recently plugged in
the computer, and then later, this error appears.
How To Fix DPC Watchdog Violation Error?
As I mentioned above, I have received many reports from users who faced this issue before. I
have suggested a few ways to the readers to fix the same problem, and it’s very helpful.
So, I have made this list with useful methods that may work for you to fix the DPC Watchdog
Violation error on your Windows computer.
Check Corrupted System Files On Your Windows
Corrupted system files are one of many reasons that lead to this Blue Screen error. In order to fix
the DPC_Watchdog_Violation error on your Windows computer, you should check and verify
Windows system files to make sure they are not corrupted. If there were any problems with those
files, the process will fix them automatically.
To get started, open the Command Prompt program with administrative privileges. Next, in the
Command Prompt program window, type:
CHKDSK C: /F /R
and then press Enter.
Because the currently drive C:\ is using by Windows system, that's why the "check disk" process
can't start. It will ask you to schedule the checking in the next time when your computer reboots.
If you agree, type Y and then press Enter.
After that, restart your computer.