Worcester 280 RSF User Operating Instructions
- Type
- User Operating Instructions
Worcester 280 RSF
The Worcester 280 RSF is a combination boiler that supplies mains fed domestic hot water plus central heating at an output of between 10.5 and 24 kW. It has a built-in frost thermostat that will operate during periods of low temperature (day or night) although the Operating Switch (or Programmer} is in the OFF position.
The boiler has an overheat thermostat that interrupts the electricity supply in the event of overheating. The thermostat is reset manually.
The boiler has a sealed water system and a minimum water operating pressure must be maintained. The minimum pressure is indicated by the green needle on the pressure gauge located on the facia panel. If the pressure falls (as shown by the white needle} the system must be re-pressurised by an installer.
Worcester 280 RSF
The Worcester 280 RSF is a combination boiler that supplies mains fed domestic hot water plus central heating at an output of between 10.5 and 24 kW. It has a built-in frost thermostat that will operate during periods of low temperature (day or night) although the Operating Switch (or Programmer} is in the OFF position.
The boiler has an overheat thermostat that interrupts the electricity supply in the event of overheating. The thermostat is reset manually.
The boiler has a sealed water system and a minimum water operating pressure must be maintained. The minimum pressure is indicated by the green needle on the pressure gauge located on the facia panel. If the pressure falls (as shown by the white needle} the system must be re-pressurised by an installer.
-
1
-
2
-
3
-
4
Worcester 280 RSF User Operating Instructions
- Type
- User Operating Instructions
Worcester 280 RSF
The Worcester 280 RSF is a combination boiler that supplies mains fed domestic hot water plus central heating at an output of between 10.5 and 24 kW. It has a built-in frost thermostat that will operate during periods of low temperature (day or night) although the Operating Switch (or Programmer} is in the OFF position.
The boiler has an overheat thermostat that interrupts the electricity supply in the event of overheating. The thermostat is reset manually.
The boiler has a sealed water system and a minimum water operating pressure must be maintained. The minimum pressure is indicated by the green needle on the pressure gauge located on the facia panel. If the pressure falls (as shown by the white needle} the system must be re-pressurised by an installer.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Worcester 280 RSF User Operating Instructions
-
-
-
-
-
-
-
-
-