DOMAILLE ENGINEERING CO-6500 User guide

Category
Ovens
Type
User guide

DOMAILLE ENGINEERING CO-6500 is a ferrule curing oven designed to cure MT and MT-RJ type ferrules, as well as various single fiber connectors like FC, SC, ST, and LC. With separate timer and temperature hold modes, you can gradually increase the temperature, maintain it for a selected time, and then cool down the oven automatically. The easy-to-read LCD display and simple controls make it user-friendly.

DOMAILLE ENGINEERING CO-6500 is a ferrule curing oven designed to cure MT and MT-RJ type ferrules, as well as various single fiber connectors like FC, SC, ST, and LC. With separate timer and temperature hold modes, you can gradually increase the temperature, maintain it for a selected time, and then cool down the oven automatically. The easy-to-read LCD display and simple controls make it user-friendly.

FerruleCuringOven
CO6500/CO6600
User’sGuide

TableofContents
ImportantSafeguards..................................................................................................................3
Welcome......................................................................................................................................4
Introduction.................................................................................................................................4
Overview......................................................................................................................................5
OperatingEnvironment...........................................................................................................5
OperatingLocation..................................................................................................................5
Cleaning....................................................................................................................................5
CureOvenControls..................................................................................................................6
CureOvenSetUp........................................................................................................................8
CuringOvenOperations:TimerMode.....................................................................................8
CuringOvenOperation:TemperatureHoldMode..................................................................9
Settinga6500/6600CureOventoautotunePID.................................................................11
MaintenanceandRepair...........................................................................................................11
SimpleTroubleshooting.........................................................................................................11
Service&Support......................................................................................................................12
CENotice(EuropeanUnion)......................................................................................................13
LIMITEDWARRANTY..................................................................................................................14
ImportantSafeguards
Beforeusingthiselectricalequipment,thefollowingbasicprecautionsshouldalwaysbe
followed:
1. Readallinstructions.
2. Keepovenoutofreachofchildren.
3. Beforeuse,checkthatthevoltageofwalloutletcorrespondstotheoneshownonthe
rating.
4. Donotoperateequipmentwithadamagedcordorplug,oraftertheovenmalfunctions,
isdroppedordamagedinanymanner.ReturnoventoDomailleEngineeringinorderto
avoidahazard.
5. Donotletcordhangovertheedgeofthetableorhotsurface.
6. Donotimmerseplug,cordorovenintowaterduetoriskofelectricshock.
7. Thisovenisnotintendedforusebyperson(includingchildren)withreducedphysical,
sensoryormentalcapabilitiesorlackofexperienceandknowledgeunlesstheyhave
propertrainingbyapersonresponsiblefortheirsafety.
8. Alwayswearprotective,insulatedovenmittsorgloveswhenremovingferrulesor
handlingtheunit.THEOVENGETSVERYHOT.
9. Donottouchhotsurfaces.
10. Placeferrulesorconnectorsintheovenbeforesettingthetimerorheatingtheoven.
11. Donotoperatetheovenforanyotherpurposethanitsintendeduse.
12. AlwaysmovePowerButtontoOFFPositionbeforeremovingtheplugfromthewall
outlet.
13. Donotplacepaper,cardboard,plasticorotherflammablematerialsinsidetheoven.
14. Unplugfrommainpowersocketwhennotinuse.
15. Servicingandrepairshouldonlybeconductedbyanauthorizedtechnician.
16. Ifovenisusedinanymannernotspecifiedinthismanual,theprotectionprovidedby
theequipmentmaybeimpaired.
CAUTION:DONOTUSETHISPRODUCTINENVIRONMENTSWHEREFLAMMABLEOR
EXPLOSIVEGASSESMAYBEPRESENT.
WARNING:ACCESSTOTHEPOWERSWITCHANDPLUGSHOULDBEMAINTAINEDFOR
EMERGENCYDISCONNECT.
WARNING:CAUTIONHOTSURFACES:Thisovengenerateshightemperaturesduringuse.
Properprecautionsmustbetakentopreventtheriskofburns,firesorotherinjurytopersons
ordamagetoproperty.
WARNING:OVENCORDMUSTBEROUTEDAWAYFROMALLHOTSURFACES.
CAUTION:Thisovenishotduringoperationandretainsheatforsometimeafterturningoff.
Alwaysuseovenmittswhenhandlinghotmaterialsandallowmetalpartstocoolbefore
cleaning.
Positiontheovensothatitisneveragainstawallorinacorner.
Whenoperatingtheovenonaworksurfacekeepthesurroundingareasclearandfree
fromclutter.Ensureadequateairspacesurroundingtheovenforcirculation.
Donotplaceanythingontopoftheovenwhileitisoperatingorwhileitishot.
Donotoperatethisovenwithothermajorequipmentpluggedintothesamepower
socket‐thereisariskofblowingthefuse.
Donottouchthehotovensurfaceswhiletheunitisonorwhilecooling.
Allusersofthisovenmustreadandunderstandthisuser’sguidebeforeoperatingthis
equipment.
Iftheovenbeginstomalfunctionduringuse,immediatelyunplugtheoven.Donotuse
orattempttorepairthemalfunctioningoven.
Donotleaveovenunattendedduringuse.
Welcome
CongratulationsonselectingtheDomailleEngineeringFerruleCuringOven.
ThisUser’sGuidewillassistyouwiththeoperationandmaintenanceoftheCureOvento
maximizetheuseandlifeofthisprecisionequipment.
Introduction
TheDomailleEngineeringFerruleCuringOvenisspecificallydesignedforcuringtwentyfour
(24)MTandMTRJtypeferrulesatatime.Itcanalsoaccommodate,withtheadditionofa
singlefiberconnectorcuringblock(availableseparately),anyofthepopularsinglefiber
connectordesigns,includingFC,SC,ST,andLC.Theovenholdsuptoforty(48)singlefiber
connectorsinaneatlyorganizedfashion.
Temperatureandtimecontrolsareconvenientlylocatedonthefrontpanelallowingforeasy
operation.Theovenallowsfortwomodesofcuringoperations:timermodeandtemperature
holdmode.
Thetimermodeallowstheoventograduallyincreasetoaselectedtemperature,maintainthe
temperatureforaselectedoperatingtime,andthengraduallydecreasetoroomtemperature
byshuttingoffpowertotheheatingelement.
Thetemperatureholdmodemaintainsthecuringovenataconstantselectedtemperature
indefinitely.Thedesiredmodeisselectedfromthefrontpanel,makingsetupsimple.Theoven
canbeorderedineither120volt(Model#CO6500)or240volt(Model#CO6600).
Overview
OperatingEnvironment
Donotsubjecttheunittothefollowingconditions:
Dramatictemperaturefluctuations
Highhumidityorcondensation
Water,oil,chemicals,orcorrosivegasses
Dustyenvironments
Severeshockorvibration
Improperlygroundedelectricaloutlets
OperatingLocation
Theunitshouldbeplacedonahard,flatsurfacethatissturdyenoughtosupporttheweightof
theoven,jumpers,andanyaccessories.Alabtableorworkbenchisrecommended.
Properhandlingmustbemaintainedinorderfortheunittooperatecorrectly
Donotdroptheunit
Donotshaketheunit
Alwaysshiptheunitintheoriginalshippingcartonusingtheoriginalpackingmaterials
Cleaning
Theovenexteriormaybecleanedusingaslightlydampenedclothandgentlecleaner.The
temperaturecontrollerandtimershouldneverbeexposedtosuchitemsaspaintthinners,
benzenecompounds,orstrongacidoralkaline.
Ifcuredepoxybuildsupontheovenheatplate(orheaterblock),itmayberemovedbygently
scrapingtheblockwithanExactoknifeorsimilartool.
CureOvenControls

1. OperationModeSelectorSwitch
2. TemperatureSetPoint“Up”and“Down”buttons
3. TemperatureReadoutSwitchingButton(currenttemperatureorsetpoint)
4. TemperatureSetPointIndicator
5. TemperatureDeviationIndicators(aboveorbelowsetpoint)
6. TemperatureLCDReadout(currenttemperatureorsetpoint)
7. HeatControllerOutputIndicator
8. TimerLCDReadout(turnsgreenwhencycling)
9. TimerSetPointReadout
10. TimerSetPointAdjustmentButtons(minutes/seconds)
11. TimerResetButton
12. TimerCycleStartButton
13. Power“ON/OFF”Switch/CircuitBreaker
14. PowerCordOutlet
CuringOvenSetUp
Placethecuringovenonahard,flatsurfacethatissturdyenoughtosupporttheweightofthe
oven,jumpers,andanyaccessories.Alabtableorworkbenchisrecommended.
Connectthecuringoventothepowersupply:
Attachthefemaleendofthesuppliedpowercordtothecuringovenpowercordoutlet
(item#14)locatedonthebackpaneloftheunit.
Attachthemaleendofthesuppliedpowercordtothepowersupply(groundedwall
outlet).
WARNING:TOPROVIDEPROTECTIONAGAINSTRISKOFELECTRICSHOCK,CONNECTONLYTO
APROPERLYGROUNDEDOUTLET.
Turnthecuringovenpower“ON/OFF”switch/circuitbreaker(item#13)locatedontheback
paneloftheunittothe“ON”position.
CuringOvenOperations:TimerMode
Selectthe“TIMERMODE”withtheOperationModeSelectorSwitch(item#1).Thisenablesthe
timerandallowstheoperatortostartthecuringcyclewhentheovenisfilled.Powertothe
heatingelementwillautomaticallyshutoffattheconclusionofthesetcycletime.
Setthedesiredcuringtemperature.
PresstheTemperatureReadoutSwitchingButton(item#3)untiltheTemperatureSet
PointIndicator(item#4)illuminates.TheTemperatureLCDReadout(item#6)willnow
displaythecurrentheatcontrollersetpoint.
CAUTION:THECURINGOVENTEMPERATURESETPOINTMUSTNEVEREXCEED140°C.
TEMPERATURESABOVE140°CWILLTRIPTHEOVERHEATTHERMOSAT,SHUTTINGOFFTHE
POWERTOTHEHEATINGELEMENT.
UsetheTemperatureSetPoint“UP”and“DOWN”buttons(item#2)toselectthe
desiredtemperaturesetpoint.
PresstheTemperatureReadoutSwitchingButton(item#3)untilnomodeindicatorsare
illuminated.TheTemperatureLCDReadout(item#6)willnowdisplaythecurrentcuring
ovenheatplate(orheaterblock)temperature.
Setthedesiredcycletime.ThecycletimeisdisplayedintheTimerSetPointLCDReadout
(item#9).
UsingtheTimerSetPointadjustmentbuttons(item#10)numbers“3”and“4”,setthe
desirednumberofcycleminutes.Button#3selectsthe“ones”digitandbutton#4
selectsthe“tens”digit.
UsingTimerSetPointAdjustmentButtons(item#10)numbers“1”and“2”,setthe
desirednumberofcycleseconds.Button#1selectsthe“ones”digitandbutton#2
selectsthe“tens”digit.
NOTE:Pressingthetopofthebuttonincreasestheunitvalue,pressingthebottomof
thebuttondecreasestheunitvalue.
Startthetemperaturecycle.
Ensurethetemperaturemodeselectorswitchissetto“TIMERMODE”.
Depressthetimercyclestartbutton(item#12).
TheTimerLCDReadout(item#8)willnowturngreenandbegintocountdownfromthe
cycletimesetpointandtheTemperatureLCDReadout(item#6)willgraduallyincrease
totheoventemperaturesetpoint.Whenthecycletimehasexpired,powertothe
heatingelementwillautomaticallyshutoffandtheovenwillgraduallyreturnto
ambienttemperature.
NOTE:DepressingtheTimerCycleStartButton(item#12)duringthecyclewillrestart
thetimingcyclefromthebeginning.
OperationoftheovenmaybestoppedbydepressingtheTimerResetButton(item#11)atany
timeduringthecycle.
CuringOvenOperation:TemperatureHoldMode
Selectthe“TEMPERATUREHOLD”modewiththeOperationModeSelectorSwitch(item#1).
Thisdisablesthetimerandslowsthecuringovenheatplatetoreachthetemperaturesetpoint
andholdconstantatthatsettinguntilpowertothecuringovenismanuallyshutoffatthe
power“ON/OFF”switch/circuitbreaker(item#13)locatedonthebackpaneloftheunit.
NOTE:Theheatingelementisautomaticallyactivatedwhenthe“TEMPERATUREHOLD”mode
isselected.
Setthedesiredcuringtemperature.
PresstheTemperatureReadoutSwitchingButton(item#3)untiltheTemperatureSet
PointIndicator(item#4)illuminates.TheTemperatureLCDReadout(item#6)willnow
displaythecurrentheatcontrollersetpoint.
CAUTION:THECURINGOVENTEMPERATURESETPOINTMUSTNEVEREXCEED140°C.
TEMPERATURESABOVE140°CWILLTRIPTHEOVERHEATTHERMOSTAT,SHUTINGOFFTHE
POWERTOTHEHEATINGELEMENT.
UsetheTemperatureSetPoint“UP”and“Down”Buttons(item#2)toselectthedesired
temperaturesetpoint.
PresstheTemperatureReadoutSwitchingButton(item#3)untilnomodeindicatorsare
illuminated.TheTemperatureLCDReadoutwillnowdisplaythecurrentcuringoven
heatpleat(orheaterblock)temperature.
NOTE:Reselecting“TimerMODE”willalsoshutoffpowertotheheatingelement.
Settinga6500/6600CuringOventoautotunePID
1. Startwiththeovenatroomtemp.
2. Settheoventotempholdmode.
3. Setthesetpointtothetempyouwillberunningatforproduction.
4. StarttheAutoTuningasshownbelow.
MaintenanceandRepair
Maintenanceofinternalelectricalpartsisnotrequired.Donotdisassemble,modify,orattempt
torepairtheproduct.
AllrepairworkmustbedonebyDomailleEngineeringatourRochester,MNlocation.Any
attempttomodifyorrepairtheunitwillvoidallwarranties,eitherexpressorimplied.
SimpleTroubleshooting
Simpletroubleshootingoftheovenforcommonminorproblemsispossiblebyusingthe
followingguide:
NoPowertotheCuringOven:
Ensurethepowercordissecurelyattachedtoboththepowersupply(walloutlet)and
theCuringOvenPowerCordOutlet(item#14)locatedonthebackpaneloftheunit.
EnsuretheCuringOsvenPower“ON/OFF”Switch/CircuitBreaker(item#13)locatedon
thebackpaneloftheunitisinthe“ON”position.
NOTE:Whenthecircuitbreakertrips,theswitchrevertsbacktothe“OFF”position.
Nopowertotheheatingelement:
Ensurethethermaloverheatswitch,locatedontherightendoftheheatingelement
undertheprotectivecover,isnottripped.(Accesstheswitchbyremovingthetwo
screwsontherightsideoftheovenbodyandliftingthecoveroff.)Ifthethermal
overheatswitchistripped,resetitbypressingthewhitebuttoninthecenterofthe
switch(Seeimagebelow).

Service&Support
TechnicalSpecifications
MachineHeight:6inches(152mm)
MachineWidth:8.25inches(210mm)
MachineLength:21.00inches(533mm)
PowerRequirements:1.2amps;220240VAC;50/60Hz.
MachineWeight:16.5lbs.(7.48kg)
ShippingWeight:19.0lbs.(8.61kg)

EnvironmentalOperatingSpecifications:
Altitude:Upto2000m
Temperature:540C
Humidity:4080%
VoltageFluctuation:+/‐10%
VoltageTransients:To2500V
PollutionDegree:2orasrestrictedorextendedconditionsapply
Intheeventofmalfunction,orwhenothermaintenanceisrequiredbeyondthesteps
documentedinthismanual,servicemustbedonebyaqualifiedDomailleEngineering
technician.Therearenouserserviceablepartsinsidethemachine.Donotremovesealed
screws.Evidenceoftamperingwillvoidwarranty.Forassistance,contactDomailleEngineering,
LLC,USA.
CENotice(EuropeanUnion)
MarkingbythesymbolCEindicatescomplianceoftheFerruleCureOvenModel#6600tothe
followingdirectivesoftheEuropeanUnion:
2004/108/EECEMCDirective
EN610101:2001
EN610102010:2003
EN613261:2006
EN55011:2009+A1:2010
YearofCEMarking:2013
EMCtestreportTÜVSÜDreport#NC1212577.1
SafetytestreportTÜVSÜDreport#0921212560000

LIMITEDWARRANTY
DomailleEngineering,LLC(“Domaille”)productsarewarrantedbyDomailletobefreefrom
defectsinworkmanshipandmaterialsforaperiodofoneyearfromtheoriginalpurchasedate.
Thiswarrantycoversdefectsinmaterialsorworkmanshiponlyanddoesnotincludedamage
duetoabuse,misuse,problemswithelectricalpower,problemswithcompressedairsupply,
servicingnotauthorizedbyDomaille,failuretoproperlycareforandmaintaintheproducts,or
normalwearandtear.Inaddition,useofparts,components,oraccessoriesnotsuppliedor
approvedbyDomaillewillvoidthiswarranty.Domaille’ssoleliabilityarisingfromanyuseofits
productsandthiswarrantyislimitedtorepairor,atDomaille'ssolediscretion,replacementof
defectiveproductsordefectivecomponentpartsthereof.Torequestwarrantyservice,you
mustcontactDomailleat7100DresserDr.N.E.,Rochester,MN55906,USA.Ifwarrantyservice
isrequired,DomaillewillissueaReturnMaterialAuthorizationNumber(RMA#).Youmustship
theproductsbacktoDomailleintheiroriginalorequivalentpackaging,prepayshipping
charges,andinsuretheshipmentoraccepttheriskoflossordamageduringshipment.Along
withyourRMA#includeyourname,telephonenumber,returnaddress,proofoforiginal
purchasedate,andadescriptionoftheclaimeddefect.Ifthedefectiscoveredbythislimited
warranty,Domaillewillrepairorreplace(atitsoption)theproductorthedefectivecomponent
part(s)andshipthemfreightprepaidtoanaddressinthecontinentalU.S.Shipmentsto
locationsoutsideoftheU.S.thatarenottheoriginalshippedtolocationwillbemadefreight
collectorwillbeshippedtotheoriginalshippedtolocation,atthediscretionofDomaille.
NOWARRANTYOTHERTHANTHEABOVELIMITEDWARRANTYISMADE,EITHEREXPRESSOR
IMPLIED.ALLEXPRESSANDIMPLIEDWARRANTIESFORTHEPRODUCT,INCLUDINGBUTNOT
LIMITEDTOANYIMPLIEDWARRANTIESOFMERCHANTABILITYANDFITNESSFORAPARTICULAR
PURPOSE,ARELIMITEDINDURATIONTOTHEONEYEARLIMITEDWARRANTYPERIOD.
DOMAILLESHALLHAVENOLIABILITYFORANYINCIDENTALORCONSEQUENTIALDAMAGES
RELATINGTOITSPRODUCTS.SOMESTATES(ORJURISDICTIONS)DONOTALLOWLIMITATIONS
ONTHEDURATIONOFIMPLIEDWARRANTIES,OREXCLUSIONORLIMITATIONOFINCIDENTAL
ORCONSEQUENTIALDAMAGESFORCERTAINPURCHASERS,SOTHEABOVELIMITATIONSOR
EXCLUSIONSMAYNOTAPPLYTOYOU.THISLIMITEDWARRANTYGIVESYOUSPECIFICLEGAL
RIGHTS,ANDYOUMAYALSOHAVEOTHERRIGHTSWHICHVARYFROMSTATETOSTATE(OR
JURISDICTIONTOJURISDICTION).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

DOMAILLE ENGINEERING CO-6500 User guide

Category
Ovens
Type
User guide

DOMAILLE ENGINEERING CO-6500 is a ferrule curing oven designed to cure MT and MT-RJ type ferrules, as well as various single fiber connectors like FC, SC, ST, and LC. With separate timer and temperature hold modes, you can gradually increase the temperature, maintain it for a selected time, and then cool down the oven automatically. The easy-to-read LCD display and simple controls make it user-friendly.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI