Vacuum
Filter Guide
Choose the right filter
for your vacuum cleaner
using the information below
For optimum filteration and cleaning, clean and/or
replace your vacuum filter/s regularly
• When using your vacuum, if a strong or musty smell is present.
• If your filter looks damaged, bent or cracked.
• If your vacuum suction doesn’t seem to be as strong your filters may be full.
• Your vacuum performance overall is low.
• Unusual or strange noises while in use.
Ways to know when your filter/s should be changed
or cleaned
Fine Dust filters
•Remove the filter and empty out any loose contents/rubbish.
• Rinse under warmer water for 1 minute (max 400C).
• Leave out to dry, making sure it is completely dry before refitting to your vacuum.
HEPA filters
•Detach the HEPA filter and rinse under cold water for 2 minutes.
•Leave out in a well ventilated room/outside to dry for 24+ hours or until
completely dry.
• Refit the filter back into your vacuum.
How to clean or change your filter/s
It is recommended to clean
your fine dust filters every 1 month
(depending on use).
HEPA filters should be cleaned
or replaced every 6-12 months
(depending on use).
