ORIENT RZ-WG0501N is a solar-powered watch with a variety of features that make it a great choice for everyday use. With its classic design and reliable performance, this watch is perfect for anyone looking for a stylish and functional timepiece. It features a date display, a 24-hour hand, and an energy depletion warning function to keep you informed about the watch's power level. The watch is also water-resistant and has a magnetic resistance function, making it durable and reliable even in challenging conditions.
ORIENT RZ-WG0501N is a solar-powered watch with a variety of features that make it a great choice for everyday use. With its classic design and reliable performance, this watch is perfect for anyone looking for a stylish and functional timepiece. It features a date display, a 24-hour hand, and an energy depletion warning function to keep you informed about the watch's power level. The watch is also water-resistant and has a magnetic resistance function, making it durable and reliable even in challenging conditions.
This product is a solar-charged watch.
LIGHT CHARGE
The light received by the solar cell is converted into electrical
energy to power the watch.
See hear Charging Method
Estimated Required Charging Time
Energy Depletion Warning Function
This watch shows the date in addition to showing the time
(our, minute, and second).
See hear How to Set the Time How to Set the Calendar
USER’S GUIDE
Meaning of symbols used in this manual
In order to prevent harm to users and third parties, as well as
damage to property, the following warning signs are used to indicate
that operation or handling involves danger.
Indicates that serious injury or death could occur if this
is ignored and this product is handled incorrectly.
Indicates that injury or damage to property could occur
if this is ignored and this product is handled incorrectly.
Provides supplementary explanations and reference
information.
Caution
Warinig
When using the product, some points must be observed in order to
protect the product and ensure safety of the user.
attached to the product. The same can be
found on the following homepage.
Some points should be observed to ensure prolonged use of your
purchased product. Please see the homepage.
Precautions
About the Product
Specifications
Drive system
Crystal frequency
Wearing accuracy
(average monthly deviation)
Watch display
Additional
functions
Operating
temperature range
Batteries used
Operation duration
from full charge
Magnetic
resistance
Water resistance
Stepper motor
32,168Hz oscillations per second
±20 seconds
(When worn on the arm at 5°C to 35°C.
Hours, minutes, and seconds(hand movement
in 1-second intervals)/24-hour hand/date
Energy depletion warning function
Overcharging prevention mechanism
-5°C to +50°C
1 secondary battery
Approx. 6 months
The water resistance performance is indicated on
the case back.
A watch with ANTIMAG. I indicated on it is a type 1
antimagnetic watch that maintains performance
when moved close (about 5 cm) a device that
generates a magnetic field.
The water resistance performance is indicated on the
case back.
A watch with WATER RESISTANT indicated on it has
enhanced water resistance performance.
Product specifications are subject to change without notice for
Names and Functions of Individual Component Parts
Energy Depletion Warning Function
The second hand moves in 2-second intervals when the energy level is low.
When the second hand moves like this, the watch is likely to
stop within about one week. Adequately charge in accordance
with the estimated required charging time.
See hear Reference Position Adjustment of Stopwatch Hands
To Maintain Stable Operation
Charging Method
The watch charges when light hits the dial.
To operate the watch when it is stopped or if the battery level is
low, charge the watch in accordance with the estimated required
charging time.
○when you start using the watch
There may be insufficient energy. It does not have to be fully
charged but make sure that it is adequately charged.
○If the second hand moves in 2-second intervals:
Charging is insufficient. Charge the battery until the second hand
moves continuously in 1-second intervals.
Energy Depletion Warning Function
Do not place the watch near light sources that generate
heat while charging (such as lights for photography or
incandescent lights).
The watch may overheat causing a fire, failure, or
malfunction to occur.
Do not charge near a light source with high illuminance
(LED, etc.).The watch and band may causing cause
discoloration.
Be sure to expose the dial to light (recharge the watch) on a
regular basis. This product is powered by solar charging.
Leaving the watch for a long time in a dark place where it is
not charging may result in a low energy level.
Charging Method
The energy level is low if the second hand does not move in
continuous 1-second intervals. Adequately charge the watch.
Energy Depletion Warning Function
Caution
TIP
TIP
Estimated Required Charging Time
Charging for longer than the required time for full charge will
not damage the watch.The overcharging prevention function
operates automatically.
This is the time required to charge the watch from 2-second
interval movement to continuous 1-second interval movement
when a stopped watch is exposed to light. If the charging time
is too short, the second hand starts moving in 1-second
intervals but may immediately revert to 2-second interval
movements. Charge in accordance with the estimated
required charging time.
The figures in the table are for reference only.
The actual required charging time may differ depending on the model.
Illumina
nce (lx)
700
3,000
10,000
100,000
Light source
Environment Full charge
Continuous
1-second interval
movement
One day's
operation
Required charging time
Fluorescent
light
Sunlight
General office
30 W 20
Cloudy
Clear sky
Approx. 65
hours
Approx. 5
hours
Approx. 35
hours
Approx. 8
hours
Approx. 2.5
hours
Approx. 1
hour
Approx. 90
minutes
Approx. 20
minutes
Approx. 6
minutes
Approx. 2
minutes
2
Approx. 18
hours
Fluorescent
light
Sunlight
１．Pull out the crown to the 2nd click position when the second
hand reaches the 60 seconds position.
２．Turn the crown to set the current time.
The second hand stops.
If the stopwatch is operating, it is
reset. The stopwatch hands return
to the 0 minute 0 second position.
The 24-hour hand is synchronized with the hour hand.
When setting the time on a watch with a calendar, take care not
to mistake a.m. and p.m. Turn the crown in the direction that the
hands move. It is "a.m." when the date switches.
To set the time accurately, advance the minute hand by about
4 or 5 minutes and then return it to the current time.
TIP
３．Push the crown in to the normal (0 click) position while
listening to time signal.
How to Set the Calendar
１．Pull out the crown to the 1st click position.
Do not set the calendar while the hands are in the time range below.
9:00 p.m. to 1:00 a.m.
The calendar will switch in this time range.
If the calendar is set in this condition, the calendar may not
switch the next day.If you want to set the calendar, move the
hands out of this time range.
２．Turn the crown clockwise to set the date.
３．Push the crown in to the normal (0 click) position.
The date must be corrected for short months.
Set the date to the "1st" when the date becomes the 1st of
the next month.
(A short month is a month with fewer than 31 days.)
TIP
The position of the calendar may
differ depending on the model.
Date correction at end of month
The crown of this watch
can be pulled out to two
click positions.
Caution
Troubleshooting
Second hand has
stopped
Second hand
moves in 2-second
Energy level is
low
Charge the battery
Charging Method
Second hand does
not move
continuously in
1-second intervals
after charging
Incident light is
too weak
Charging time
is too short
Symptom Remedy and reference
Possible
Charge in accordance
with the estimated
required charging time
Estimated Required
Charging Time
If the problem persists,
©2022 Seiko Epson Corporation
U799050 0 (Rev.1.0 EN)
If resetting the system does not solve the problem, the watch
may be defective. Contact the customer service center
(TEL: 042-847-3380).
How to Set the Time
The solar cell is located below the dial.
The design of the dial and position of the crown may differ
depending
T
wo-second interval movement indicates movement of the
second hand in 2-second (2-unit) intervals.
-
1
ORIENT RZ-WG0501N is a solar-powered watch with a variety of features that make it a great choice for everyday use. With its classic design and reliable performance, this watch is perfect for anyone looking for a stylish and functional timepiece. It features a date display, a 24-hour hand, and an energy depletion warning function to keep you informed about the watch's power level. The watch is also water-resistant and has a magnetic resistance function, making it durable and reliable even in challenging conditions.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Seiko Caliber VS22B User guide
-
Epson RZ-TX0101N User guide
-
Seiko V174 Operating instructions
-
-
-
-
-
-
-