2. GME
  3. MB042
MB042

GME MB042 User guide

  • Hello! I have reviewed the GME MB042 and MB042B Quick Start Guide. This document provides instructions on how to assemble and use the heavy-duty fold-down antenna mount, including mounting, antenna installation, cable routing and positional adjustments. I'm ready to answer your questions about it!
  • Where does the antenna mount attach to?
    What size mounting stud is compatible with the spacer ring?
    How do you adjust the antenna position?
Attach an antenna to the fold down
antenna mount and securely tighten
it.
Ensure that the antenna cable is
routed through the antenna mount
as shown in Figure 2.
Heavy Duty Fold Down Antenna Mount
The fold down antenna mount attaches to the tab on the bull bar or to
any other bracket on a vehicle.
To assemble the fold down antenna
mount, ensure that the washer
and spring washer are positioned
properly.
Fasten the nut and tighten it.
Antenna cable
Washer
Spring washer
Nut
MB042 / MB042B Quick Start Guide
1
2
Insert spacer ring to
suit antenna with a 1/2"
mounting stud.
Pull the lever handle out to retract the locking pin. Fold the antenna to
the desired position. Engage the locking pin with the closest locking hole
position. Release the lever handle to lock the antenna mount position.
Lever
handle
Part Number: 311061 Drawing Number: 49645-3
To avoid injuries be careful not to pinch hands or ngers
between the lever handle and the bracket when operating.
3
17 Gibbon Road, Winston Hills NSW 2153, Australia
gme.net.au
GME Pty Ltd
/